Question about Kenmore 24032\24036 Top Load Washer

1 Answer

I used a service a while ago but no help just a quote for a service technician. I want to try to fix this myself but need help before I start. The washer washed a kitchen rug and there were some of the backing left in the bin after. The washer did wash another rug after also that was fine. The next load was whites and this load did not drain. The washer is full still of water. Could there be a clog? And is there a way to open it to see or clear it if so?

Posted by on

  • kmackita Mar 27, 2011

    Daniel thank you but I did that and nothing was in there & the spin is still not working. That didst fix my problem. The machine did fill with water again once drained so it is not electrical. Could there be a reset switch for the motor or what could cause the spin not to work?

  • kmackita Mar 27, 2011

    This was not the problem. It was the our lid switch. We are electrical taping it follow but if it in the future does not work, where can I buy this switch replacement & how much is this part? I saw a video on installing it so I know that information. Thank you.

    Since your solution did not fix my problem, do I not get charged for the service? It's ok if I do because your service was still helpful.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,323 Answers


Yes you are right, it can be clogged....please check this video on how to clean the clog, it is for drain pump replacement though but will help you in cleaning:

Hope this helps...please post back for further assistance.


Posted on Mar 25, 2011

  • Daniel Scott
    Daniel Scott Mar 28, 2011

    You can buy the parts from this link and post back for further assistance.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Samsung AQV12NSBNXSA Air conditioner,turn on,works for 30seconds & then turns itself off and a light comes on & starts blinking & then it wont work, is there anything I can do myself to try fix myself

probably not as it could be an outside control board or problem star/ run capacitors for the compressor
call a technician for a proper diagnosis and quote

Oct 22, 2016 | Samsung Heating & Cooling

1 Answer

How to fix Nokia 5530 freezing on start up. "Phone start-up failed Contact the retailer." I bring it to Nokia Care In Cambodia but they can't fix it. Please help...

This problem is more complicated to fix,unless you have a gsm gadget and special cable to use, It can not be fix by any free software or updating it to the internet. I believe that there's a mobile service technician along your area or in any Mall that can fix your phone problem.

Jul 07, 2011 | Nokia 5530 XpressMusic Smartphone

1 Answer

My JVC GR-D22U is showing a message "condensation,

This is usually caused by a failed component in the moisture detection circuitry within the camera and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on .

Feb 27, 2011 | JVC GR-D22U Camcorder

1 Answer

Constantly going into an "unbalanced

need to replace the support drum of your unit,the coz of this one why its wort out is overload every time you use,put exact amount of kilo in dryer for long last use,now the support drum is not easy to remove only the service technician can do that coz we need to dismantle the unit to replace that part. i dont know how much the price.again dont try to repair this one coz is hard,

Jan 01, 2011 | Dishwashers

1 Answer

Problem with Push to Start Button on my GE Gas Dryer

This dryer is under warranty. Call the store where you purchased it as they are obligated to fix it for free or take it back.

May 07, 2009 | General Electric DCVH640GJ Gas Dryer

1 Answer

Error Code E1-15 - can I fix this myself?

Most messages that state "call for service" are for instances where the unit is not running to prevent damage to the unit.
You should call an autherized or certified technician to work on the unit.

Apr 24, 2009 | Sharp AR-M237 Digital Copier

2 Answers

60 " SONY KF60WE610 screen went greenish

Depending on when you bought this TV, this could be the lamp. Does the red light below the green light come on? (That's the lamp light). This light typically comes on around the 3rd year of use for an average individual. I've recently enountered the same problem and will try to replace the lamp myself. Apparently its very simple.

Dec 01, 2007 | Sony XL-2100U Projector Lamp for...

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers


Level 3 Expert

5687 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

2005 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides