How do you remove the top on model no. DV448aep/xaa? IT is abrushed s.steel top with adent in it.

I don't like Samsung. LG seems to be more reliable and cost more.

Sensor is screwed or the timer relay for that part of it is not working . Go to an appliance store to get wiring diagrams ordered and might even know about the problem w that model

http://www.youtube.com/watch?v=WhYLcCC8zaI

If its giving a t0 error, it's this video.

please checkthat the belt is not loose /worn /broke .

It sounds to me like the drive belt that goes around your dryer tub has broken.



The back of the dryer will need to be removed to gain access to the problem.

I think your heating element is burned out. You can find parts at repairclinic.com

If you remove the element (unplug it first of course) you will be able to tell if it is burned out by looking at the actual heating coils. If there are any breaks in the wire anywhere you know its the problem.

Good luck

Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.

if you dryer is gas check out this gas no heat tip....

If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.

check out this electric no heat tip...

heatman101

go back to the seller and he will put more light on how you can get the part.

let the engine cool down then chip off what u can with a screw driver then spray degreesing oil on it and scrubit with abrush keep it wet then hose off .
good luck Lindz