Question about Projection Televisions

2 Answers

The picture flickers about every two seconds Maganvox Console TV Model # RJ5020 AK01 Serial # 62362249 Chassis # 27G1-01 AA

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 319 Answers

Hello JRobbiNF,

I believe that you have a cracked solder joint in your deflection board joint(s). I believe that on your model the deflection circuitry is near the flyback. These part(s) should be located, and replaced.

Are you handy with TV repairs, or is this something that you will want a trained technician to handle?

Brian

Posted on Aug 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Projection T... Master
  • 19,396 Answers

If flickering repeats at a costant frequency , then is caused by the color wheel, replace it.

Posted on Aug 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 60 inch Maganvox tv is blurry and the letters at the bottom are blurry. Can;t hardlt make out the picture now.


Replace STK convergence chips there are two next to the heat sink.Unsolder old and solder in the new.

May 21, 2010 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

I lost my picture I still have sound but no picture.


I have a Philips Magnavox Projection TV.

I had dish satelight install on my TV. It worked well for two days, then the picture started showing in a square box. I ffixed the convergence and it seemed okay. The next day I turned on the tv and it had sound, but no picture. When I press the status button, the picture would come on then go right back out. Now I don't have any sound or picture. Here is the model information:

Brand: Philips Magnavox
Model #: 9P6040 C104
Serial #: 51190366
Chassis # PTV843
Manufactured: Nov. 7, 2000 (3910K071H)
TV Receiver Listed: 347K E10839
Amps: 3.7
HZ: 60
V: 120

Can someone please, please help me!

Nov 15, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

No picture or sound mitsubishi 62525


Capacitor failure is the most likely scenario the FMT ans Signal PWB would cause the picture interference and the power pwb would cause the lamp light to turn red and give a 34 code when the device/ input and menu buttons are pressed in together and held for five seconds. That chassis has issues with every board in the chassis having failed capacitors you can get repair kits for the V26 chassis at the follwing link that come with instructions. Your model is the V26 chassis. Heres the link.
http://servicemanuals.vstore.ca/

Jan 25, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Noise from Samsung rear projection DLP HD TV.


this noise is an indication of a bad color wheel. aa dlp uses a mechanical motor to spin a coloered segment disk. this turn the white light of the lamp into your colors of pictures. Now anything that moves will eventally break. the flickering is also an indication of a color wheel going bad. eventally this will cause the set to shut down. Color wheels can be replaced. i dont know your model so i am not sure of the exact replacement procedure. at my shop we charge average 250 for such a repair

Oct 31, 2008 | Samsung HLN5065W 50" Rear Projection...

1 Answer

Symptoms Philips HDTV


I will try submitting a request to philips to see if I can nail down that chassis number, if i can find that out I will be able to help you.

Mar 30, 2008 | Projection Televisions

1 Answer

Maganvox TV with red-shadow to picture


Hi Emily,

Your TV has bad convergence amplifiers. They are large integrated circuits that are mounted on large metal heat sinks. They have a part number on them, but might be covered up by a bracket. The part number should start with STK. They are replaced as pairs. You will have to find someone with the skills necessary to replace them.

Best Regards,

MyTvGuy

Feb 10, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Tv problem


Hi,
I just serviced this model, same problem as noted. I did a resolder job on the power/drive PC board. This was NOT the problem! The problem acts like an electrolytic capacitor issue or horizontal drive amp. Once I get my hands a service manual & schematics, we'll resolve it. I'll post my results AFTER Super Bowl.

Rick Macy
BC Electronics
Macy41@aol.com

Dec 18, 2007 | Toshiba 50H72 50" Rear Projection...

1 Answer

RCA rear projection tv


Dir TV projection Techcions, I own RCA Model:P52937 Chassis No.PTK195M26B. After a big flood here in Chicago, my basement got flooded and my projection TV was in water up to 1 foot. Befor I turned it on, I dreid it out perfectly, then, I turned it on, and a couple components from the power supply got burned up to the point where I am not able to read the part numbers that are on it. I was wondering if you have this kind of chassis and model service manual for this projection TV, or conponet part number i location 101 on mother boatd power supply. Thank you in advance, Darius If you prefeer, you may call my cell phone: 773-875-3926

Aug 02, 2007 | RCA P52937 52" Rear Projection Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...