Question about Vivitar Vivicam 5388 Digital Camera

1 Answer

I can not program my machine vivitar5388, where I can get to download?

Posted by on

  • kakima Mar 25, 2011

    Have you considered NOT connecting your camera to your computer? The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

    Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Vivitar Master
  • 102,366 Answers

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).

Posted on May 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I downloaded a Linux program from the Internet to my download directory. How can I install it?


It depends on situation.
What is your operating system?

Windows:
No easy way exists to run Linux program in windows. Use VirtualBox or VMware virtual environment, download Linux OS, install virtual Linux machine and then install your downloaded program in Linux.
VirtualBox free download (virtual environment):
Welcome to VirtualBox org

Ubuntu Linux OS free download (virtual machine):
http://www.ubuntu.com/download/desktop

Your final installation set look:

Your downloaded program
Linux operating system - installed as virtual machine
Virtual environment
Windows OS
These components are installed on computer

Linux:
There exists more program packages types :
RPM package installation (Centos, RedHat, OpenSuse...)
rpm -ivh program_name.rpm

Debian package installation (Ubuntu, Debian...)
sudo dpkg -i program_name.deb
or
sudo apt get install program_name

General compressed file / installator
File extesion examples:
package_name.tgz
package_name.tar.gz:

Unpacking
tar -xvzf program_name.tgz

Installation of executable file :
./install.sh
(or another file from the package)

Jan 19, 2016 | Computers & Internet

1 Answer

Program answering machine


Enter the model of your VTech system into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

Jan 30, 2013 | Vtech IP5850 Answering Machine

1 Answer

How do I access windows applications on the same machine


Linux and Windows I'm sure you know are two totally separate platforms of Operating System's. Meaning their applications and programs are not cross compatible with one another.

However. Ubuntu has over 33000 free programs that are just like Windows programs. They can read and access pdf's. avi's, wmv's and all the other things that you might need.

Since the question isn't completely clarified here. I'm gonna say you can just download Ubuntu's versions of programs.

Or... Install what they call a Virtual Machine and "emulate" a Windows system, download the windows programs, and run it like a standard MS System.

Sep 11, 2011 | Canonical Ltd. Ubuntu

2 Answers

COMPUTER CRASHED I NEED TO RELOAD CD BUT I DONT HAVE ACCESS CODE


There are now several versions of the basic Futura software and AutoPunch available on the market. The most current is version 1.0.0.2. To determine what version of either software you have, you will find this information around the inside rim of the CD at approximately 4 o'clock. Before loading any of the Options into your computer, check the version and then follow the steps below. The following steps will update your software so that you will now have the latest 1.0.0.2 version of the basic program and all options.

To load base software 1.0.0.0 with AutoPunch 1.0.0.0 or base software 1.0.0.1 with Autopunch 1.0.0.1

  • You must use bobbin part number 085128. This bobbin is specifically designed for the Futura CE-100 and CE-200.
  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and turn off the machine
  • Install Autopunch and leave the CD in the tray
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in the Access code from Autopunch jewel case and then left click on the check mark to open program

To load base software 1.0.0.0 with AutoPunch 1.0.0.1 or base software 1.0.0.1 with Autopunch 1.0.0.0

  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and turn off the machine
  • Install Autopunch and leave the CD in the tray
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in the Access code from Autopunch jewel case and then left click on the check mark to open program

To load base software 1.0.0.0 or 1.0.0.1 with Autopunch 1.0.0.2

  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer- machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close software and turn off machine
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Install Autopunch using Installation Wizard - leave CD in tray
  • Turn on Futura machine and double left click to open program
  • Type in Access Code from Autopunch jewel case and then left click on check mark to open program

To load base software 1.0.0.2 with Autopunch 1.0.0.0 or 1.0.0.1

  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer- machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and turn off machine
  • Place Autopunch CD in tray but CANCEL Installation Wizard
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Turn on Futura Machine and double left click to open the program
  • Type in Access Code from Autopunch jewel case and then left click on check mark to open program

To load base software 1.0.0.1 with Autopunch 1.0.0.1 with Hyperfont 1.0.0.2 or Photo Stitch 1.0.0.2

  • Load Base software (have the machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and then turn off the machine
  • Install the Autopunch program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in the Access code from Autopunch jewel case and then left click on the check mark to open program*
  • Close program and then turn off the machine
  • Download appropriate update for Windows version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop icon to install update
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and then turn off the machine
  • Install HyperFont program - leave CD in tray
  • Turn on Futura machine and double left click to open program
  • Type in Access Code from HyperFont jewel case and then left click on check mark to open program*
  • Close program and then turn off the machine
  • Install PhotoStitch program - leave CD in tray
  • Turn on Futura machine and double left click to open program
  • Type in Access Code from PhotoStitch jewel case and then left click on check mark to open program*

* Must open the program after installing each Option with CD in tray and type in Access Code before installing next Option.

To load base software 1.0.0.2 and adding all Options - Hyperfont 1.0.0.2, PhotoStitch 1.0.0.2, Autopunch 1.0.0.2 and Cross Stitch 1.0.0.1

  • Install Base software (have machine set-up for embroidery with USB connected to both the machine and computer- machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and then turn off machine
  • Install Autopunch program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from AutoPunch jewel case and then left click on check mark*
  • Close program and turn off machine
  • Install Hyperfont program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from HyperFont jewel case and then click on check mark*
  • Close Program and turn off machine
  • Install Photo Stitch program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from PhotoStitch jewel case and then left click on check mark*
  • Close program and turn off machine.
  • Install Auto Cross Stitch program and leave CD in tray
  • Download appropriate update for Windows version from the Futura-Support.com updates (Fut_sp2_Options.exe) and save to desktop
  • Double left click on the desktop download icon to install
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from Auto Cross Stitch jewel case and then left click on check mark*

* Must open the program after installing each Option with CD in tray and type in Access Code before installing next Option.

Dec 11, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Need to do powerpoint program


You can't. Powerpoint is a Microsoft program that must be installed on your machine. If you want a free version or a slideshow program (such as powerpoint), you can download OpenOffice for free.The program is called Impress.

Oct 22, 2009 | Computers & Internet

1 Answer

Hi im looking to reinstall the webcam program on my medion 2320 notebook


Hi,

To reinstall the Webcam program you may need the drivers, download the same from the thread below first.

Uninstall the software from add remove programs under control panel to make sure that the previous version is cleaned out of the machine.

Then run the downloaded .exe file & it should reinstall the same on your machine.

Please let us know if that was helpful enough.

Thanks

Shiv.

http://www.opendrivers.com/searchopendrivers/Medion%20webcam.html

Aug 25, 2009 | Computers & Internet

3 Answers

Downloading


The Designer 1 needs the design in an shv format in order to read it. The floppy disk for an older machine may be created using several different programs but the Husqvarna Viking module is known as Disk Manager. It is included with many of the HV software packages. With a newer USB Designer 1, the program is Disk Manager USB.

May 09, 2008 | Husqvarna Designer I

2 Answers

Help!!!!!!


IF YOU ARE RUNNING WINDOWS VISTA YOU HAVE TO DOWNLOAD FROM FUTURA SITE. HAD TO TAKE MY MACHINE AND COMPUTER TO COMPUTER SHOP TO GET SOFTWARE DOWNLOADED BECAUSE SOFTWARE IS FOR WINDOWS 98,2000 AND XP

Aug 25, 2007 | Singer CE-200 Quantum Futura Computerized...

Not finding what you are looking for?
Vivitar Vivicam 5388 Digital Camera Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vivitar Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Vivitar Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...