Question about Northgate (STAX2517C2) PC Desktop

2 Answers

@msn.comMy computer turns off and will not turn back on unless I turn off the power supply and wait with the power button pressed on then resume the power supply. Sometimes it takes several tries to get it to run.What is wrong?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 433 Answers

Some condensers in the mother board is damaged send it to mantinance center

Posted on Mar 25, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 516 Answers

Yet you can still turn on your computer but as you have mentioned it takes several to tries to get it on. Buy a new power supply unit and replace your old power supply.Have a nice day

Posted on Mar 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot get it to finish the "align print head." Keeps getting an error and support code 2500. This is getting to be very aggravating and I'm about to take it back the store.


Step by step Error code 2500 :
1. The printer is turned off, or die completely
2. Then your press the Resume Button, the button symbol or paper, hold down 3 seconds, not released.
3. Press the power button, Printer indicator Light Turn Green in the moments after the power button is on tap.
4. Remove the Resume Button but the power button still in a state of hold
5. Press and hold the power button, and the press the resume button as many as five times.
6. Release both buttons that you press simultaneously, or in parallel. usually after being released, the indicator is flashing or blinking while.
7. Seeing your computer, it will be detected that there is a new printer, wait until the computer has been detected such printer.
8. Turn off your printer, by pressing the Power button.
9. Wait until the printer completely dead in total, if it please Your Turn On Agai

Mar 24, 2016 | Canon Pixma MX922

1 Answer

Mg 5350 6502


Solution 1:
  • Unplug the printer.
  • Remove the faulty Cartridge
  • Plug in the printer and press and hold power button
  • Keep it held down. Press Resume twice, and this should reset the fault.
Solution 2:
  • The last cartridge installed may be faulty.
  • Install a new cartridge

Solution 3:
  • When error is indicated, turn power switch off so green light is extinguished.
  • Hold down resume button and hold down power button so both are held down at same time
  • When green light comes on, continue holding down power button and let resume button go, then press resume button twice.
  • Let power button go.
  • Press resume button four times, power button should be released before doing this.
  • Wait until printer settles down, if power is off, turn on. If power will not come on, remove power cord from back of printer, then wait 15 seconds before plugging back in again and turn power on.

Nov 21, 2013 | Canon Office Equipment & Supplies

1 Answer

Looking for a solution to an error 6502 on canon printer mp510


turn power switch off so green light is extinguished.

First hold down resume button and then hold down power button so both are held down at same time

When green light comes on, continue holding down power button and let resume button go, then press resume button twice. Then let power button go.

Then press resume button four times, power button should be releasedbefore doing this.

Wait until printer settles down, if power is off, turn on. If power will not come on, remove power cord from back of printer, then wait 15 seconds before plugging back in again and turn power on. This normally solves the error problem - if not go through same procedure again.

Jul 25, 2011 | Canon Office Equipment & Supplies

1 Answer

How do i reset my pixma 1990 printer the ink receptacle is full message keeps on appearing?


To reset the printer follow these steps : 1. Turn off the printer and hold the "RESUME" button located on top of the MP220. While holding the "RESUME" button, press the "POWER" button and wait for the machine's green LED to illuminate.
2. Release the "RESUME" button while holding the "POWER" button. Press the "RESUME" button twice and release the "POWER" button.
3. Press the "RESUME" button four times followed by the "POWER" button. Turn the printer off and then on to complete the reset process.
As per your error follow the below mentioned steps :
1. Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)
2. While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)
3. While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.
4. When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)
5. Press the Power button. The LED lights in green, and the selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)
6. Power off then check it.
In case if the problem persists please revert back.

May 22, 2011 | Office Equipment & Supplies

2 Answers

Error 6502


Dear Asker
how would i know this error is for which printer so i am assuming it's cannon.
Sometimes the Canon printers which use PG-5BK/CL-8 colour cartridges with chips will give error mesaages like 6502 or other types of error meaasge to do with the cartridges, which has the orange light flashing and the printer will not work. Follow this procedure which quite often resets the printer and allows it to resume printing.

When error is indicated, turn power switch off so green light is extinguished.

First hold down resume button and then hold down power button so both are held down at same time

When green light comes on, continue holding down power button and let resume button go, then press resume button twice. Then let power button go.

Then press resume button four times, power button should be releasedbefore doing this.

Wait until printer settles down, if power is off, turn on. If power will not come on, remove power cord from back of printer, then wait 15 seconds before plugging back in again and turn power on. This normally solves the error problem - if not go through same procedure again.

Incidentally, you may find that if the chips had previously been disabled,the low ink warnings are showing againand they will have to be disabled once more. This would indicate that the above procedure clears the firmware memory of the disabling of the chips, this may be usefull if you need some warranty work done on you printer after the chips had been disabled. Canon does warn that disabling the chips may result in the printer's warranty being voided

Feb 28, 2011 | Office Equipment & Supplies

1 Answer

Our Cannon ip90 says the waste ink tank is full and will not print. I know there are ways to reset the printer to print but I could not find the right one for this printer


Hi! My name is Mace and I'm here to help.

There are two ways to fix this waste ink tank error.

The first is to clean the waste ink tank. There are absorber foams located under the cartridge carrier when it is resting. You can simply lift up this absorber foams using a tweezer an clean this on running water and soap. Once dry return it back.

Reset the Printer. This is the last and final fix to your problem.
1. Turn off the printer...press and hold the resume/cancel button... then press and hold also the power button..
2. Release the resume/cancel button while holding still the power button.
3.(While still holding the power button)...press three times the resume/cancel button
4. (After pressing the resume/cancel button three times)...release the power button
5. Wait for a couple of seconds.. when the led stops blinking and turn green..Press the resume/cancel button four times.
6. Press the power button...some functions will be perform before the printer return to menu selection mode..
7. Turn off the printer wait for 5 seconds, then turn it on and try printing.

I hope that is the best solution to your problem. Thank you for using Fixya.

Jan 10, 2011 | Canon PIXMA iP90 InkJet Printer

1 Answer

How do I reset the Waste Ink Counter on my Canon iP90 printer?


HelloFollow these steps
1. Turn off the printer...press and hold the resume/cancel button... then press and hold also the power button..
2. Release the resume/cancel button while holding still the power button.
3.(While still holding the power button)...press three times the resume/cancel button
4. (After pressing the resume/cancel button three times)...release the power button
5. Wait for a couple of seconds.. when the led stops blinking and turn green..Press the resume/cancel button four times.
6. Press the power button...some functions will be perform before the printer return to menu selection mode..
7. Turn off the monitor wait for 5 seconds, then turn it on and try printing..

Hope that solve the waste ink absorber in your printer..


If you find this solution helpful..would you be kind to rate this solution and vote for this on the help below..thanks..

Jan 05, 2011 | Office Equipment & Supplies

1 Answer

I have a message saying my ink absorber is full. What do I need to do?


Hi there Joan,

Try these steps:

1. While the printer is turned OFF, press and hold the Resume/Cancel button and Power button. Wait for the lights to turn green. Now, while holding the buttons together, release first the Resume/Cancel button.

2. Then press the Resume/Cancel button thrice then release the two buttons now.

3. When the LED stops blinking and lights in green, press the Resume/Cancel button 4 times.

4. Press the Power button. The LED lights in green, and the selected function is performed.. When the operation completes, the printer returns to the menu selection mode automatically.

6) Power off then back on and test.

Oct 11, 2010 | Canon PIXMA iP1600 Printer

1 Answer

Hi my printer has te E2/E7 error code on it and i tried resetting it !!! well unless i am doing it wrong!! it isnt working!!! this is how i am doing it with the printer off press the resume button, while...


This is the procedure but not each time waiting for the carriage to return to original place.Just press resume button 4 times consistently.Then press the Power button and the printer should turn off, if not, press the Power button once more.Your printer should respond as normal.

Nov 08, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Ink absorber


E27 = Waste ink absorber full or platen waste ink absorber full
Reset Your printer.
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Turn off the printer ( "Power" button).
Hold the button "Resume" (red circle in the triangle), add a printer (click "Power") - an indicator light green.
Hold the "Power" button, release the button "Resume".
Not releasing the "Power" button, double click "Resume" and release both buttons.
Four times click "Resume"
Once you click "Power", to confirm the selected action (reset counter absorber). To disable the printer "Power" button to click again.

Aug 02, 2008 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Northgate (STAX2517C2) PC Desktop Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Northgate Computers & Internet Experts

Lee Eismann

Level 2 Expert

86 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Northgate Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...