How to do password lock dlink wifi - D-Link AirPremier DWL-3200AP 802.11g/b (790069273544) Wireless Access Point

https://www.youtube.com/watch?v=Iwylh7rZj44 How to change Wifi password on Dlink router Wifi password change on link...


Youtube video to watch

You need to get the Wireless Range Extender to communicate with your existing router. Instructions are attached. If you have already done this, you should be able to search for WiFi connections and connect to the SSID with your password. It should be the network that has the most strength. In Canada, you can contact Dlink at (800) 361-5265. In the US, (877) 453-5465.
http://www.dlink.com/-/media/Consumer_Products/DAP/DAP%201320/QIG/DAP%201320_QIG_US.pdf

You will get an 'authentication' problem trying to connect to this dlink 600 or any other wifi services/routers that are 'protected' and encrypted using WEP or WPA or WPA2 security (e.g. not public or 'OPEN' network): apart from the SSID, you will need to set your android tablet or ipad to use the WEP or WPA or WPA2 PASSWORD/PASS KEY to successfully connect (you get it from the Wifi/Router administrator).

change the password with a new one (not the default), then change the ssid with a new one (not the default). then reconnect

ok first prep. we need to configure your router. to do that we need your compaq laptop directly connected to the dlink via ethernet cable. after securing the connection, try to open a browser, whether internet explorer or mozilla firefox. go to the address bar and type in, 192.168.1.1 it would ask you now for a username. username is " admin " password is " password " if it wont let you in, try "admin" for password. if it still cant, try to live it blank and just click on login. it would take you now to the dlink router page. there you can configure your wireless connection and set your network name. make sure to click apply settings after configuring it. then try to check your wireless connectivity again. this should work.

Well,

you can try connecting to the router through the net, use the default 192.168.1.1. use the username "admin" and the password"password"

or go to http://support.dlink.com/emulators/wbr2310/support_internet.htm

Use an Ethernet cable to connect the network port on a computer (desktop/laptop/notebook) to one of the LAN ports on the router.
Start your computer's web-browser, and connect to the web-server "inside" the router.
Run the "Wireless Network Setup Wizard" to configure your wireless network, i.e., pick an SSID and a password.
Then, configure your telephone to connect to that SSID, and to use the password that you selected.

You reset the D-Link back to the factory default by - Press the RESET button at the back of the wireless router when it is powered up. Holt the RESET button foe at least 5 secs until the LEDs flash and then release the RESET button.
You can then configure the D-Link as follows ;-
To set-up and secure the wireless router from unauthorized access, follow these steps: -
1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL IP address.
3. Enter the router setup, login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WPA2 (if not then WPA).
7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router wirelessly.

just open your dlink ip page and type the username as admin and leave the part of password.

it will open a page where there is a palce to add a wifi password



sagar