Question about Projection Televisions

3 Answers

Convergence unstable. Picture jumps and displays objects double. Much like viewing a screen without 3-D glasses

Posted by on

  • s_d_duncan Aug 04, 2008

    I'll give this a try.

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

Hiya
it sounds like the lamps inside are in need of adjustment, you should be able to do this yourself if you have the patience, as it's quite a delicate process.

hope this helps


please dont forget to rate the helpfulness of this reply, thanks kj

Posted on Aug 03, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 319 Answers

Please provide the model and make of your TV

Brian

Posted on Aug 03, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Projection T... Master
  • 19,396 Answers

What model is the tv?

Posted on Aug 03, 2008

  • Ginko
    Ginko Aug 04, 2008

    If you have a DLP tv it is probably a problem with the lamp, if it is a traditional tv can be a cracked solder joint in the deflection board.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV picture looks like a 3-d movie without 3-d glasses.


Ur convergence is dead.U know how to solders?Must replaced 2 convergence ICS,and some or all it resistors.Buy a convergence kit at Tv repair world.com Tvrepairkits.com to repair it ur self.The shop will cost u $300 for parts and labors.

Mar 05, 2010 | Hitachi 53FDX01B 53" Rear Projection...

1 Answer

Picture has ''double vision'' with red.


This is a common problem. Its called a convergence failure.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3D
  • Colors wont align
  • Screen may look distorted
  • TV shutdown - does not display video
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Feb 20, 2010 | Projection Televisions

1 Answer

Objects are doubled and colors are distorted


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 11, 2010 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Display looks like you need 3D glasses to view.


Sounds like a convergence problem. Especially since you said that the screen(picture)wasn`t linear anymore.

If the magic/touch focus function doesn`t clear the problem then your convergence modules may be faulty. They are used to align the three tubes (red/green/blue) deflection. If you feel handy with a soldering iron i could assist you in replacing them, otherwise you might need the help of a local repair tech. Hope this help. Good luck

Dec 01, 2009 | Projection Televisions

1 Answer

Double image on screen


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai2_bing.gif,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 22, 2009 | Sony KP-53S75 53" Rear Projection...

1 Answer

Arched pink lines across screen. Now green and pink double stacked wording.


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 25, 2008 | Sony KP-57WS500 57" Rear Projection...

1 Answer

TOSHIBA 42PW23P rear projection television


Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted
  • No Audio/Video - makes a chirping sound.
Example Photo:
5f6e85c.jpg
Problem #2 CRT Fluid has clouded over.

Symptoms


  • Dull Video, Washed out
  • White/Bright looking video
  • Halos around objects
  • Red/Orange looking
Example Photo:
ee1ca68.jpg

You can see more examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 21, 2008 | Toshiba TP43H95 43" Rear Projection...

1 Answer

Picture in 3d without the 3d glasses


Replace 2 convergence chips, will start with stk ###-###

Oct 02, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

Our Samsung Tantus Rear Projection TV, the colour is a problem, on the right hand side there is a red shadow next to the picture so it almost seems as if the picture is doubled. I have a double picture...


Sounds like a convergence issue with your RGB colour channels - probably need to get it serviced and have the convergence tuned.
Unlikely you can do this yourself.
Papa

Jun 20, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...