Question about Radio Shack Pro-94 Scanner

1 Answer

Im trying to add new numbers programmed into my pro-94 scanner. i no longer have the manual and i have been browsing the web everywhere with no luck so far.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

You can download and print your scanner manual, at no cost, here:

http://support.radioshack.com/support_electronics/doc61/61172.pdf

Bill B.
Listening in since the 60's

Posted on Mar 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Having problem programming Pro-94, is there a simpler book or read than the manual. It says you must load in logical channel order. how do I determine this??? Also am I correct in that you can only load...


put your scanner in manual mode.and then go to program mode and program your frequencies into your scanner.try that and see if that works.....if not it could be a problem in your Radio....

Feb 22, 2011 | Radio Shack Pro-94 Scanner

1 Answer

Radio Shack Pro-94


No telling what he did, but if you've tried deleting his entries and the scanner is still locked up, you'll need to reset it. This procedure will clear all the information you have have stored in the scanner.
1. Turn the scanner OFF.
2. While holding down the 2 and 9 keys, turn the scanner ON. CLEAR will flash for about 5 seconds while the scanner clears its memory.
NOTE: Do not turn the scanner OFF until CLEAR stops flashing.

Need the operating manual for your scanner? You can download;/print it here:

http://support.radioshack.com/support_electronics/doc61/61426.pdf

Bill B

Feb 17, 2010 | Radio Shack Pro-94 Scanner

1 Answer

Program scanner radio shack pro 94 for listening to cell phones


Heads up that in some countries / States this can carry severe penalty.

I cannot give any direct information and it up to you to make sure you apply to the laws of your state etc

A good source of information are the two sites below

Frequencies

Scanner software

With any luck you will also find either the manual or a link to it there as well as quite a lot of other useful information that would give you guidance as to the legality

Oct 10, 2009 | Radio Shack Pro-94 Scanner

2 Answers

Need instructions on programing Radio Shack Pro 94


Radio Shack has a website will ALL their manuals... Click HERE and you'll find the pro94 on the list and it will give you a full manual.
Have a blast!

May 25, 2009 | Radio Shack Pro-94 Scanner

1 Answer

Need instructions on how to program


You can get the owner's manual for your scanner by clicking HERE

have fun...

May 25, 2009 | Radio Shack Pro-94 Scanner

1 Answer

Scanning Freq


According to the manual the Pro 94 should cover that frequency.
Please note, certain frequencies are blocked in some countries. I see no reason why 217.031 should fall into this category although the closest may be 217.030 which should be close enough

Take a look at the manual >HERE< which should help you to program your scanner.

Best wishes...:-)

Mar 17, 2008 | Radio Shack Pro-94 Scanner

2 Answers

RadioShack PRO-94 Scanner


is there a vista program avalib.for pro-94 pc-interface cable

Sep 19, 2007 | Radio Shack Pro-94 Scanner

Not finding what you are looking for?
Radio Shack Pro-94 Scanner Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Radio Communications Experts

John
John

Level 2 Expert

509 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Jason

Level 2 Expert

211 Answers

Are you a Radio Shack Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...