Question about JVC Projection Televisions

1 Answer

Can not get any channels after 25 i went through and check the scan part but nothing

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 317 Answers

Tv tuner bad.

Posted on Aug 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Digital tv tuner not displaying picture


. Try putting you tv set to channel 3 or 4. Try your tv in all modes. Check the back also to see if in the right spots with the wires. Check your channel scan status, try it on anntena and try it on cable, run channel scan on both. good luck. Try vcr wires if cable wires dont work. vcr wires are yellow red and white. Try another cable cord sometimes they get old. Try looking at your remote and setting it to tv.

Sep 02, 2012 | Panasonic PT-50LCX63 50" Rear Projection...

1 Answer

Power light is lit, but there is no power to the set.


Please define the brand and type of tv that you have...

Apr 22, 2009 | Toshiba TP55G60 55" Rear Projection...

1 Answer

Old TV can't scan for cable channels


it depends on how old the set is. some of the older sets would only go as hi as channel 120. some really old sets only went to 36 on cable. how high do the numbers go?

Jan 05, 2009 | Projection Televisions

1 Answer

How do i add the rest of the channels


Good Day;

It sounds like the TV is in the 'TV" mode (antenna), Go into menu and change signal setting to cable, and go through the auto scan. Good Luck, big IRISH.

Oct 05, 2008 | Mitsubishi VS-45605 50" Rear Projection...

1 Answer

Sound but no picture


Good Day, gary;
It sounds like the TV has a bad formatter board. This board is not available from the factory, it must be repaired. Tile or block pattern with no video or OSD. Check D8F00 and D8F01 part # 264P828010, also check C8F26 and C8F29 part # 141P148000 (1 uFD, 25 V) on the FMT PCB (part # 930B924002). Remember FMT PCB is not available. Good Luck, Big Irish.

Jul 06, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Frozon at chanel 25


Go into the setup menu and redo the tuner setup. It will ask you if it is over-the-air (regular) TV or cable and then it will do a scan that searches for channels.

After that it should work.

If not, you will need service.

However, you may be able to get around a bad TV tuner by using another tuner, such as cable tuner or in your VCR to provide the channels. To do this use another input on your TV or select channel 3 on your TV.

Hope this helps :)

Mar 31, 2008 | Projection Televisions

2 Answers

Sanyo tv...something is wrong with the imput on my tv or on the remote. the screen says to check all terminals on back and press the up channel key. when i do this it just scans the channels then returns...


jtrent2- O.k you say your t.v has nothing hooked to it at all, what do normally have hooked to it. Do you normally run coax cable,or rca input. The tv is looking for your source ,hook up your regular source, and see what you get. The tv needs to see a source,of some kind. Try hooking a vcr to the cable connector on the back, play a tape and scan your channels.The tv should pick up the vcr as channel 3 or 4 and lock in. Try this and let me know,I can help you. cooltek Mar,3/08

Mar 04, 2008 | Projection Televisions

2 Answers

My big screen tv show snow on all channels.


ok.

if you see only snow on the regular screen, might as well check the connecting antenna at the back since you mean all snow on all channels.

hope this helps.

Jan 17, 2008 | Akai PT4298HD Rear Projection Television

1 Answer

Pioneer sdp4682k


try the RGB or the S-video out of the Direct TV receiver.

Nov 11, 2007 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Projection Televisions Experts

easy alberta
easy alberta

Level 2 Expert

132 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a JVC Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...