Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Same problem here

Hi, I have exactly the same problem as you decribed. Were you able to fix it yet? If so, I'd love to get in contact with you!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replaced switch on left side of lid ($17.00 for part) took less than 1 hour even though I had never done it before and was not sure what I was looking for. works fine now

Posted on Sep 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washer is not operating properly in spin cycle. It seems that the motor is running much faster than it should while the basket is spinning much more slowly than it should.


Hi,
You have not specified your washer type or model, but the most likely cause for the syptoms you decribe is the drive belt between the washer motor and the basket pulley which is slipping. It may be possible to adjust the belt tension or replacing the drive belt will almost certainly solve your problem.
Best wishes,
Graemevm

Apr 18, 2010 | Washing Machines

1 Answer

My neff 4380 integreated washer dryer's drum only


Hi I have exactly the same problem. Did you get your fixed and if so what was the problem?Many thanksCarole

Apr 04, 2010 | Neff W5340X0 Washer

1 Answer

WWSE3160A Washer will not start but ALL the lights come on.


check the motor bushes,as this may be the problem you decribe.

Jul 15, 2009 | Washing Machines

1 Answer

Kenmore Frontloader Error message F2 will not drain


There is a hidden drain/coin trap underneath or in the back that is most likely blocked with socks or 3-in-1 laundry sheets by purex!
Fixed my problem and my sisters!

Oct 13, 2008 | Kenmore Washing Machines

2 Answers

Kitchenaid KAWS750JQ3 Top Load Washer


hi there,

make sure that the program is not on the "Intermittent Agitate Program". that would be the cause of the delay.

the other issue would be the timer itself. the timer is mechanical, so once the contact on it is corroded, it will only function intermitently or not at all.

please let me know if i can be of more help.

thanks

Sep 28, 2008 | KitchenAid KAWS750L Top Load Washer

1 Answer

My washer wont spin out


kinked hose or blockage in the water pump you defininatley have material in the water pump
disconnect washer all together pull out after you drain the water by hand as far as can go use a dolly take out side drain the rest by tipping on side you might need 2 or 3 people to get the washer out with little water left when on side pull the water pump off look inside and pull material out with a pair of needle nose pliars that clamp you will need 2 people to pull out material one to hold the pump and one to pull material out with pliars

once done before you put back together do a lube on your washer with appliance oil this will insure good maintenance

what i decribed at top is the non costly way to fix your own washer if there is material stuck in water pump

Jun 13, 2008 | Maytag Washing Machines

1 Answer

The washing machine won't spin out


kinked hose or blockage in the water pump you defininatley have material in the water pump
disconnect washer all together pull out after you drain the water by hand as far as can go use a dolly take out side drain the rest by tipping on side you might need 2 or 3 people to get the washer out with little water left when on side pull the water pump off look inside and pull material out with a pair of needle nose pliars that clamp you will need 2 people to pull out material one to hold the pump and one to pull material out with pliars

once done before you put back together do a lube on your washer with appliance oil this will insure good maintenance

what i decribed at top is the non costly way to fix your own washer if there is material stuck in water pump

Jun 13, 2008 | Frigidaire Washing Machines

1 Answer

Error codes????


Remove the top cover. Inside there's a service manual that decribes the error codes and how to read them.

Dec 29, 2007 | GE WCVH6260F Front Load Washer

1 Answer

My washer wont work


no part known as the busher, please decribe in detail what part you are referring too. Regards Engineer

Jul 26, 2007 | Kenmore 3.2 cu. ft. Plus Top Load Washer

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...