Question about Casio FX83ES Scientific Calculator

Ad

The random number generator generates a number between 0 and one. To get a random number between 1 and 100, multiply the generated number by 100, add 1, and discard the fractional portion. To generate a random number between 1 and 10, multiply the generated number by 10, add 1, and discard the fractional portion.

Posted on Mar 25, 2011

Ad

Hi there,

Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

The RAN# button generates a random number between 0 and 1.If you want to flip a coin, see whether the generated random number is less than 0.5. Alternatively, multiply by 2 and see whether the integer portion is 0 or 1.If you want to flip a die, multiply the generated random number by 6, add 1, and ignore the fractional portion. This will give you a number in the range 1 through 6. A similar method will allow you to generate random numbers in any range.

Apr 16, 2012 | Casio FX-55 Calculator

The random number function always generates a number between zero and one. You can convert this to a random number in any range by a suitable combination of multiplications and additions. For example, if you want a random number between zero and ten, multiply the generated random number by 10. If you want a random number between one and ten, multiply the generated random number by 9 and then add 1.

If you want to simulate the roll of a six-sided die, multiply the generated random number by 6, add 1, and ignore the fractional portion. This will give you a 1, 2, 3, 4, 5, or 6 with more-or-less equal probability.

If you want to simulate the roll of a six-sided die, multiply the generated random number by 6, add 1, and ignore the fractional portion. This will give you a 1, 2, 3, 4, 5, or 6 with more-or-less equal probability.

Mar 10, 2011 | Casio FX-300MS Calculator

The post answer the question concerning how to generate random integers. The example given is for rolling a dice. I am inserting the modification that treats your case at the end.

The random number generator function is called Ran# and can be accessed in RUN mode by pressing:

**[OPTN] [F6] [F3] (PROB) [F4] to access the (Ran#)** function

In the paragraph above, the**bold text** in square brackets indicates keypresses,
while the text in parentheses represents the menus that appear at the
bottom of the calculator screen. This also assumes there are no menus on
the bottom of the screen when you begin. If PROB is already on the
screen, then the [F6] key is not necessary, just press [F3] then [F4] at
this point.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

**Ran#×100 or Ran#(100)**

Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

**Ran#×6**

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

**Int(Ran#×6)**

Press**[OPTN] [F6] [F4] (NUM) [F2] to access the (Int)**

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

**Int(Ran#×6)+1**

The result should be an integer between 1 and 6.

To generate random number between 1 and 50

**Int(Ran#×50)+1**

The random number generator function is called Ran# and can be accessed in RUN mode by pressing:

In the paragraph above, the

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

Press

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

To generate random number between 1 and 50

Jul 16, 2010 | Casio FX-115ES Scientific Calculator

The random number generator function is called Ran# and can be accessed
in RUN mode by pressing:

**[OPTN] [F6] [F3] (PROB) [F4] to access the (Ran#)** function

In the paragraph above, the**bold text** in square brackets indicates key presses,
while the text in parentheses represents the menus that appear at the
bottom of the calculator screen. This also assumes there are no menus on
the bottom of the screen when you begin. If PROB is already on the
screen, then the [F6] key is not necessary, just press [F3] then [F4] at
this point.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

**Ran#×100 or Ran#(100)**

Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

**Ran#×6**

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

**Int(Ran#×6)**

Press**[OPTN] [F6] [F4] (NUM) [F2] to access the (Int)**

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

**Int(Ran#×6)+1**

The result should be an integer between 1 and 6.

In the paragraph above, the

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

Press

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

Jul 06, 2010 | Casio CFX-9850G Plus Calculator

The random number generator function is called Ran# and can be accessed
in RUN mode by pressing:

**[OPTN] [F6] [F3] (PROB) [F4] to access the (Ran#)** function

In the paragraph above, the**bold text** in square brackets indicates keypresses,
while the text in parentheses represents the menus that appear at the
bottom of the calculator screen. This also assumes there are no menus on
the bottom of the screen when you begin. If PROB is already on the
screen, then the [F6] key is not necessary, just press [F3] then [F4] at
this point.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

**Ran#×100 or Ran#(100)**

Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

**Ran#×6**

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

**Int(Ran#×6)**

Press**[OPTN] [F6] [F4] (NUM) [F2] to access the (Int)**

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

**Int(Ran#×6)+1**

The result should be an integer between 1 and 6.

In the paragraph above, the

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

Press

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

Mar 03, 2010 | Casio FX-9860G Graphic Calculator

Hello,

To access the Random number generator, press [MENU], Use arrows to select [RUN] and press [EXE].

In [RUN] press [OPTN][F6:->] to pan to the right then press [F3:PROB] then [F4:RAND#]. The command echoes on the screen.

Hope it helps.

To access the Random number generator, press [MENU], Use arrows to select [RUN] and press [EXE].

In [RUN] press [OPTN][F6:->] to pan to the right then press [F3:PROB] then [F4:RAND#]. The command echoes on the screen.

- Now if you press [EXE] a number between 0 and 1 is generated.
- Each time you press [EXE] a new number is generated.

Hope it helps.

Nov 07, 2009 | Casio FX-9750GPlus Calculator

A random number generator exists on this calculator. It is accessible in RUN or PGRM modes by pressing the OPTN key. If you don not see a tab PROB at the bottom of screen, press the rightmost key to move to next page.

Anyway, RAND# generates a real number between 0 and 1.

For other numbers read on.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

**Ran#×100 or Ran#(100)**

Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

**Ran#×6**

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

**Int(Ran#×6)**

**[OPTN].......(NUM) [F2] to access the (Int)**

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

**Int(Ran#×6)+1**

The result should be an integer between 1 and 6.

Anyway, RAND# generates a real number between 0 and 1.

For other numbers read on.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

Nov 07, 2009 | Casio FX-7400G Plus Calculator

Hello,

Turn calculator ON, press MENU if you see no icons. Use arrow key to highlight the RUN application. Press OPTN, press F6 to pan right. Press F3: Prob, then F4:Ran# then EXE to execute.

Each time you press EXE a new random number is generated. You might want to fix the number of decimal digits to less than the 10 digits displayed by default.

By default number generated are between 0 and 1. If you want numbers between 0 and 100 you enter Ran#(100).

Hope it helps.

Turn calculator ON, press MENU if you see no icons. Use arrow key to highlight the RUN application. Press OPTN, press F6 to pan right. Press F3: Prob, then F4:Ran# then EXE to execute.

Each time you press EXE a new random number is generated. You might want to fix the number of decimal digits to less than the 10 digits displayed by default.

By default number generated are between 0 and 1. If you want numbers between 0 and 100 you enter Ran#(100).

Hope it helps.

Oct 20, 2009 | Casio CFX 9850GB Plus Calculator

Press the math key. Arrow over to PRB (probability) Select #5 randInt. You will now be at the home screen. From here you have to let the calculators the set of numbers you want to use. For example if you want to use the numbers 1 thru 50 type in 1,50. You must separate the numbers with a comma. Then press enter as many time as you want to generate a random number. It is not necessary.to end the parentheses.

Aug 09, 2009 | Texas Instruments TI-83 Plus Calculator

Random number generators on computers are not really random. They need to be "seeded". If you seed the random number generator with the same seed each time you will generate the same list of numbers. A common technique in computer programming is to seed the random number generator with a value like the number of seconds that has occurred since midnight. This gives you the illusion of real random numbers.

Look up the word "Seed" in your calculator documentation and it will most likely tell you how this is accomplished on the TI calculators.

Look up the word "Seed" in your calculator documentation and it will most likely tell you how this is accomplished on the TI calculators.

Nov 20, 2007 | Texas Instruments TI-83 Plus Calculator

972 people viewed this question

Usually answered in minutes!

×