Question about Lego Darth Vader (Light-Up Lightsaber) - LEGO Star Wars Minifigure

1 Answer

My lego light up lightsaber is not working. It lights up very little. Is there something i can do make it lightup like it used to. thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,018 Answers

Hello, you will need to take a small flathead screwdriver and you will need 2 batteries #CR927. To change the batteries for the lightsaber.

  1. Swing the cape around from the back to the front exposing the back.
  2. Now facing the back, take the left side arm off.
  3. If you look inside where the arm was at you will see the two batteries.
  4. Take that small flathead screwdriver and wedge it between the two batteries and pry them up and the batteries will come through an tiny access panel on the back.
  5. Now take the screwdriver and finish prying that panel off nice and easy, don't ruin the plastic cover.
  6. Now the two batteries are right there.
  7. Place the new batteries in the same as the old ones are sitting. (positive side up)
  8. Reverse procedure and you are finished.
Regards, Tony

Posted on Mar 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I use the buttons in this QHY watch?


Hopefully, this will help...

Lego Watches Manual Instruction:
There are 4 buttons on this lego watch case, Light button, Mode button, Stop button and Reset button, now I will show how to set the time easily!
1, Light Button: Press this button, the watch LCD light will display for 3-5 seconds;
2, How to use the stopwatches chronograph function?
Answer: When the lego watches in normal working condition, Press "Stop button" for 1 time, then the watch goes into the chronograph mode, then you can use "Stop button" and "Reset button" to operate this function.
3, How to set the alarm time?
Answer: When the lego watches in normal working condition, Press "Stop button" for 2 times, then the watch goes into the alarm mode, then you can use "Stop button" and "Reset button" to set the alarm time, also you can turn off or turn on the alarm function and chime on every hour function by the same operate.
4, How to set the right watch time, hour, minute, second, week, date, month, year?
Answer: When the lego watches in normal working condition, Press "Stop button" for 3 times, then the watch goes into the time setting mode, then you can use "Stop button" and "Reset button" to set the second, minute, hour, week, date, month and year.

This is all. So now please have a try to set your lego watches time!

Dec 06, 2014 | Watches

1 Answer

Preheat light flashes


You sure had a misfire and the error light lightup, next time you take it to service ask them to clean the error

Oct 14, 2013 | Volkswagen Cars & Trucks

1 Answer

Light and sound do not work


Very simple..just change the light censor and the sound blaster...good luck

Dec 28, 2011 | Hasbro General Grievous Electronic...

2 Answers

Where do you order an australia Lego Darth Vader figure?


You can go this www. fishpond.com.au or you can copy this link:
http://www.fishpond.com.au/Toys/LEGO-Star-Wars-Figure-Clock-Darth-Vader-Clic-Time-Holdings/0830659002113

>you can order it there and it is free shipping

May 22, 2011 | Lego Darth Vader and Obi-Wan LOOSE Lego...

1 Answer

My son stuck his master replica Yoda lightsaber into the ground and now the saber doesn't work. i need to know how to fix it, can you help? thanks


hi. i'm his son. and FYI I got the blade to work but now the sound isn't working. and thanks for throwing me under the bus like that dad

May 21, 2011 | Master Replicas Star Wars Yoda Lightsaber...

1 Answer

Fx lightsabers


I believe this website should help, They have good products and you can also call them (look on the right side of the page in red.)
http://www.ultraforcesabers.com/force_fx_lightsaber_repairs/custom_lightsaber_repairs

Dec 30, 2008 | Toys

1 Answer

Cannot figure out where to put batteries in Lightsaber


We figured out that it is one of the one's that doesnt light up!!

Dec 21, 2008 | Hasbro Toys

1 Answer

Gas Dryer


It is either the flame sensor or the main gas valve

Aug 08, 2007 | Whirlpool GGW9250PL Gas Dryer

14 Answers

Not spraying liquid.


This is where you attach the Lego.

not-spraying-liquid-pi02cr1kttkrastpy2vlmywc-3-1.jpg

Nov 13, 2006 | Hoover Floormate H3000 Upright Wet/Dry...

Not finding what you are looking for?
Lego Darth Vader (Light-Up Lightsaber) - LEGO Star Wars Minifigure Logo

Related Topics:

494 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lego Toys Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Tom Chichester

Level 3 Expert

44063 Answers

Bill Boyd

Level 3 Expert

50566 Answers

Are you a Lego Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...