Question about LG 19.7 Cu. Ft. Side-by-Side Refrigerator with Bottom-Mount Freezer - Smooth White

1 Answer

Fuse is blown in circit board - LG 19.7 Cu. Ft. Side-by-Side Refrigerator with Bottom-Mount Freezer - Smooth White

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 42 Answers

Did you have a power surge recently? That fuse can't blow itself. If a power surge got you then I would say to pull the board and put another fuse in. Of coarse unplug the refrigerator first. This may involve some soldering to remove the caps over the end of the fuse. If you did not experience a power surge then you should probably replace the board. If a component on the board has faulted, then replacing the fuse would be pointless. Because it would just blow it again. Hope this helps.

Posted on Mar 24, 2011

Testimonial: "great help keepup the good work. clw"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just got the car and only got three blocks it says on dash circit 3 failure


there is a fuse box in the arm rest , ck the fuses one is blown ..once you repalce it should remove the circut 3 failure light

Feb 18, 2011 | 1989 Jaguar XJ6

1 Answer

My windshield wipers are stuck in the upright positon and will not work. There is a noise that they make like they are trying to work.


the circit board is bad in wiper motor just pull plastic cover off then the circit board is next then put back together

Jan 31, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

Flashing on oven F54 shut off oven at circit


HI. This code is an indication of a shorted upper door latch circuit. This could have be caused by a malfunctioning relay board.

The necessary actions are to gain access to the upper door latch assembly, and test the circuit with a meter. Use the procedure below.

Before repairs or further testing can begin you must disconnect the electricity at the fuse panel, at the circuit breaker panel, or by pulling the plug. Make sure the power is off before proceeding. Set the latch to the "clean" position and test for circuit continuity at the terminals of the switch with your VOM's ohmmeter function. If there is no continuity, the switch is faulty. Use caution when testing.

NOTE_ If the upper door latch switch passes the test, simply replace the relay board.

Jan 01, 2010 | Thermador Ovens

1 Answer

I have a Whirlpool Gold, had 4years,had to replace


Thermal fuse mounted to the control board see if you have power on each side of it checking from post to ground,if you got power going in but none going out it's blown,and has a more serious issue somewhere.

Aug 12, 2009 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Fuse on circut board blows when replaced each time power switched on.


You have a fault on the circit board, you need to identify the faulty component and replace it or call a tv repair man.

Oct 19, 2008 | Televison & Video

2 Answers

Centralocking isnt working when you press the front button on the key the bilnkers flash but on movement on the lock when i press the rear button on the key i get nothing vs commodore 95 model


hey mate
have you tried the fuse box
there should be a diagram on the back of the fuse cover
locate the fuse and check and see if it is blown or not
and also get a curcit tester pen and test the central locking fuse holder circit
hope this helps cheers

Jul 19, 2008 | 1986 GMC Jimmy

2 Answers

Dead micro


It could be a bad in-line circit breaker fuse. Unplug the microwave and take the outside cover off. Look for the in-line circuit breaker fuse. Use a plastic fuse puller (not your hands or a metal tool as there is still voltage stored in the microwave even when it is unplugged). Look at the fuse and see if it is blown. (The metal wire running length of tube will be broken. If you have one, test with an Ohmmeter.

Jun 03, 2007 | GE Spacemaker JVM1640SJ Microwave Oven

Not finding what you are looking for?
LG 19.7 Cu. Ft. Side-by-Side Refrigerator with Bottom-Mount Freezer - Smooth White Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

christian nielsen

Level 3 Expert

358 Answers

Are you a LG Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...