Question about Refrigerators

1 Answer

Kenmore 795-78502800 display is stuck says "Er" on left and "1F" on right none of the control buttons do anything refer is currently running fine otherwise

Posted by on

  • 2 more comments 
  • bob Mar 25, 2011

    OK , now i know what the code means and what to fix but why does that code stay on the screen and not allow anything else to show on the screen no matter what button i push?
    thanks

  • bob Mar 25, 2011

    We have this refer in a house that used to be a rental. We booted the renter last summer and now use it for a vacation place. Since we do not spend a lot of time there we have not been able to get used to the refer. We bought it new two years ago.

    The ice maker does not make any ice. When the ice maker button is turned on the green lights on the left side of the ice maker come on for large, medium or small ice and that selector works.

    Nothing else moves or makes a sound.

  • bob Mar 26, 2011

    maybe, but i did not think of it that way.
    you mentioned " You may notice slower ice production but the other fans should be ok"
    I get no ice production.

  • bob Mar 26, 2011

    very helpful

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, this is an error code for the icemaker fan motor. If the control does not see a signal coming back from the fan motor you will get this error code. Please see the image below from the service manual that explains the ER IF error code.
Click on this LINK.....
The ER IF code indicates a failure of the icing fan. You may notice slower ice production but the other fans should be okay. The fan or the control is bad.

Posted on Mar 24, 2011

  • 1 more comment 
  • Tunde Autos
    Tunde Autos Mar 25, 2011

    Hi, the code stays there until you fix the problem. It is trying to remind you and let you know how important it is to fix the problem and as long as the problem still persist, nothing else will show on the screen..

  • Tunde Autos
    Tunde Autos Mar 25, 2011

    Are you posting a new question??

  • Tunde Autos
    Tunde Autos Mar 26, 2011

    Then the control may be bad...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does flashing red LF mean on freezer


Kenmore Refrigerator Error Code = Er 1F
Error Condition = The fan for the ice compartment failed
Repair or Check = Icing fan blocked - ice fan motor is defective - wiring in the circuit is defective - control board has failed
Parts Needed = Ice fan motor - Wiring harness - Power control board
Kenmore Refrigerator Error Code = Er IF
Error Condition = The fan for the ice compartment failed
Repair or Check = Icing fan blocked - ice fan motor is defective - wiring in the circuit is defective - control board has failed
Parts Needed = Ice fan motor - Wiring harness - Power control board

Jul 05, 2017 | Washing Machines

1 Answer

What does LF flashing red mean


Kenmore Refrigerator Error Code = Er 1F
Error Condition = The fan for the ice compartment failed
Repair or Check = Icing fan blocked - ice fan motor is defective - wiring in the circuit is defective - control board has failed
Parts Needed = Ice fan motor - Wiring harness - Power control board
Kenmore Refrigerator Error Code = Er IF
Error Condition = The fan for the ice compartment failed
Repair or Check = Icing fan blocked - ice fan motor is defective - wiring in the circuit is defective - control board has failed
Parts Needed = Ice fan motor - Wiring harness - Power control board

Jul 05, 2017 | Washing Machines

1 Answer

What does Er 1F mean on the ice maker display


LG Refrigerator Error Code Er 1F or Er IF
The ice maker fan is not working properly. Try defrosting the freezer first before trying to replace anything.

Jun 29, 2017 | Refrigerators

1 Answer

My Kenmore Refrigerator show Er 1F, what it means? How can i set it back?


Ice fan is stuck not spinning could be iced up disconnect mains power for 3 to 5 mins to reset control board will be OK if fan manages to free itself.
I do not have one to direct you to it but if it is iced up may take longer to thaw out but its control board only needs 3 to 5 mins for reset condition.

Hope this may help

Jun 06, 2015 | Kenmore Refrigerators

1 Answer

Error message Er 1F


Maybe this will help. i would check fan first and see if ice has built up in fan.
https://www.youtube.com/watch?v=a4MdwuoN3jc

May 26, 2017 | Kenmore Refrigerators

1 Answer

Managemylife


That error comes from a failing fan due to ice build up which directly affects your ice maker.

Feb 26, 2014 | Kenmore Refrigerators

1 Answer

Can not get thru to manage my life


My question is my Kenmore Refrigerator display "Er 1F", What is means? How can reset it to normal?
My E Mail address is (dinkouchen@yahoo.com)

Jan 20, 2014 | managemylife.com

1 Answer

On the door display it says " ER DH " what does


I found this to be quite up your alley... gives you possibilities for DIY repair.

http://knol.google.com/k/fixing-the-er-dh-code-on-kenmore-elite-trio#

Apr 13, 2011 | Kenmore Elite 44723SS Commercial...

1 Answer

I have a Kenmore Elite Refrigerator, Model No. 795.77573600. The ice and water dispenser give the error message Er 1F. In searching online it appears that this problem is related to the ice compartment...


This is an error code for the icemaker fan motor.
If the control does not see a signal coming back from the fan motor you will get this error code.
Please see the image below from the service manual that explains the ER IF error code.

http://media.fotki.com/1_p,wkbwtkdqbqkgrkkxgtqsskgwtqkq,vi/ktfgsrbbdxktrrwffdr/1/1303472/5961857/image18067img-or.jpg

The ER IF code indicates a failure of the icing fan.

You may notice slower ice production but the other fans should be okay.

You can select the ultra ice option and see if the fan toggles on.

The fan or the control is bad.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Aug 25, 2010 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Brian Coughlan

Level 2 Expert

275 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...