Question about Elna 8007

1 Answer

I purchased an Elna 7000 on E-Bay.Wonderful machine. I also purchased a 492000-20 walking foot for it. I can not find instructions on how to attach the walking foot to the machine.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Elna Master
  • 1,133 Answers

I'm assuming that this is a generic style walking foot for low shank machines and it will fit your Elna?
To attach it, you will see a long lever arm at the front of the foot and the little curved bracket at the back of the foot.

Remove your usual foot and the clip on foot holder by undoing the thumb screw. Now fit the walking foot on instead by putting the lever arm around the needle bar and the curved bracket around the pressure bar and then putting the thumb screw back into place and screw up tight to hold the foot in place. Now lower the pressure foot and manually wind your machine forward a few stitches. As the needle bar goes up and down, it should move the long lever arm too which works the walking foot teeth gripping the top layer of fabric with each stitch.

Trust this helps.

Posted on Mar 27, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a user manual for elna 7000, in pdf format.. how can i get it?


You can purchase the manual for the Elna 7000 from some sewing machine parts dealers. See https://www.sewingpartsonline.com/instruction-manual-elna-7000.aspx?variant_id=5435 , for one. Click on the PDF option, add it to the cart and checkout. After you pay for the purchase, you should be given the download link. Unfortunately, I don't see any option to download this manual from Elna directly on their Machine Manuals page, http://www.elnausa.com/en-us/pages.php?page=107 .

I hope this helps.

Cindy Wells

Apr 30, 2018 | Elna Sewing Machines

1 Answer

How to adjust needle from left to right using zipper foot on ELNA 7000 sewing machiene


The instruction manual should have that information. If you don't have one, you can get it here:

Elna Sewing Machine Instruction and Service Manuals

Machines either have a needle that will move right or left or the zipper presser foot will adjust right or left.

Feb 26, 2018 | Elna Sewing Machines

2 Answers

Walking foot for ELNA 9000 or Elna lotus zz please


SORRY FIXYA does not sell any products , check with a sewing machine company

Aug 17, 2017 | Elna Sewing Machines

2 Answers

Where can I find a instruction manual for Elna 7000


you can purchase manual this at sewingpartsonline.com

Instruction Manual Elna 7000 Computer

the 7000 was the last of computerised the models produced by Tavaro Switzerland, had some very nice features and big range of stitches. Circa 1987-88 I think.

Jul 08, 2016 | Elna Sewing Machines

1 Answer

Walking foot for 1963-1964 elna supermatic


try a elna dealer
sewingpartsonline.com
sew4less.com

May 15, 2012 | Elna Sewing Machines

1 Answer

What make of walking foot would fit my Elna su air electronic sewing machine, thankyou


You need a low shank style walking foot. Even back in the 80's when your SU air electronic was new, the walking foot sold by Elna was an after market one, and not made by Tavaro. Same with the ruffler attachment, it was after market and actually fitted quite a few makes of machine.

I would just ask the dealer/shop if they will refund your money if you find it doesn't work just in case.

There is a low shank one on sewingpartsonline.com
http://www.sewingpartsonline.com/walking-foot-low-shank-p60444.aspx and they list the SU as compatible with it.

Take off the foot holder on your mache, and you need to fit the little open ended arm over the needle bar and the foot bracket onto the foot with your machine's regular thumb screw. The up and down movement of the needle bar operates the walking foot.

Jun 25, 2011 | Elna 2007 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Elna Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

194 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Elna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...