Question about Whirlpool Calypso GVW9959K Top Load Washer

2 Answers

Cycles not start

I pushed the "Normal" or any other programed options, nothing happens. I have checked the power outlet. It has power.

Posted by on

  • youbill Aug 03, 2008

    Sorry, I am not sure where is lid switch. Could you please tell me?

  • erico vargas Mar 08, 2009

    When I press normal or any option nothing happens, but it turns on with the stop/cancel button and the number 26 shows up on the screen but the washer doesn't do anything.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Power 2 outlet and washer will not even light

Posted on Mar 01, 2009

  • laciebaird Mar 01, 2009

    where is the lid swich on a top mount calypso

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 770 Answers

Check the lid swich

Posted on Aug 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My kenmore 800 series washer started draining but stopped 3/4 of the way and now won't do anything at all


Put the machine into the spin cycle and start as normal. Then with the lid open take a item like a pencil and depress into the lid switch where the lid pushes down on a switch. If machine starts spinning remove and replace lid switch. Let me know.

Feb 01, 2015 | Kenmore 2982 800 3.5 cu. ft. Top Load...

1 Answer

Can't select wash cycles


Is the control board displaying any fault codes?

Try disconnecting the power cord to the washer from the wall outlet for 5 maybe 10 minutes...give the control board enough time to power down and hopefully the control board could self-correct itself by resetting. No different than re-booting a computer.

If you still run into the same problem, and if so equipped, try holding down the "end of cycle" signal button for 10 seconds and see if that resets it.

Dec 07, 2013 | Kenmore Washing Machines

1 Answer

Zanussi zsf 6161 dishwasher - won't start program cycle


follow this steps and fix it. God bless you
Check Power
Check the outlet by plugging an appliance into the same outlet the washer was plugged into an running the appliance a hair dryer works good for this it will draw some amperage. If it works fine move on.

Control
To check the control remove the top panel and then remove the console to access the wiring to the control. Find the wire feeding the control from the main power cord. If you cannot visually see this refer to the tech sheet or service manual. Connect voltmeter to the 2 wires feeding the control if it is recieving power and it does not respond replace the control
5d4c5cf4-821d-4d1a-b62e-e289365a8fdc.jpg

May 28, 2013 | Washing Machines

1 Answer

Kenmore washer mn: 402-49032011 starts cycle but does nothing.


It is possible that the machine does not start off the cycle because there are errors due to feedback from the inputs. For the program to start up the main program controller must initiate the INLET/MOTOR/DRAIN pump/ valve to open up and allow each function to be driven starting from the flow of water into the drum as also the drain valve to open to exit the water at the point of the program cycle. If this does not happen then the voltage at the valve/motor/pump must be checked or the fault relates to no voltage from the controller. This means the controller is a suspect.

Jan 23, 2013 | Washing Machines

1 Answer

WHEN I PUSH THE START, NOTHING HAPPENS,NO NOISE AND THE DOOR DOES NOT LOCK. IF I PUSH THE CLEAR BUTTON TWO -- WILL APPEAR AND STAY FOR ABOUT 30 SECONDS AND THEN A BLANK DISPLAY. UNPLUGGED WASHER FOR 5 MIN....


if you had a power failure latly or a power surge it might have knocked the program on the machine.Push and hold the stop/start button for about 10,seconds it should reset if that fails again hold the stop button and another ie rince hold/power save or whatever buttons you have i just cant remember which one there are so many,but try the first option first it should reset.adrian,,,,,,,,

Aug 15, 2010 | Kenmore 44072 Front Load Washer

1 Answer

No power


test the outlet with something else (lamp, voltmeter, etc) If no power, check the breaker. If you have power, try holding the button in for a few seconds, but make sure the door is latched well first. Try to start it on a different cycle.

Jul 10, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Kenmore Elite H3 control buttons - some work some don't


The diagnostic function will not help you if your user interface board (UIB) is acting up because to put into diagnostic you have to select drain spin, then the no spin option, and hit the prewash button 4 times.

It sounds like your UIB is the problem.

Jan 01, 2009 | Kenmore 42822 Front Load Washer

1 Answer

ATF6700FS - Affinity? 3.5 Cu. Ft. I.E.C. Capacity Washer Won't Start


ERR=An error has been detected
PAU=Cycle has been intrupted
58=High current on motor phase

To clear latest stored error code:
• Turn the Program Knob to the start position, Spin Only.
• Press Start/Pause to start the cycle and save it.
• Press Cancel to stop the cycle and turn off the LEDs.
• Press Cancel again to turn on the LEDs.
• Within 5 seconds, press and hold the Option and Start/Pause buttons until LEDs start sequentially chasing, then release buttons.
• Turn the program knob clockwise 7 clicks from the Start Position. The control will signal the last error code.
• Press and hold the Options and Start/Pause buttons for 3 seconds. The code will be cleared.
• Exit Diagnostic Mode to return the washer to normal operation.
a) Unplug the power cord, wait 5-8 seconds, then reconnect the power cord OR
b) Turn the program knob clockwise 2 or 3 clicks after the Start Position. Press Options and Start/Pause buttons
together for a few seconds until wash cycle LEDs appear.

Feb 25, 2008 | Washing Machines

Not finding what you are looking for?
Whirlpool Calypso GVW9959K Top Load Washer Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...