Question about HP LaserJet 3600n Printer

1 Answer

I got the error 50.9 on my hp colorlaser jet 3600 and i've what it said on the screen of the printer and the error it still there. please help me, i need this, my job is in the line. what can i do to make the printer good as new.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Hi hope this helps

the error looks to be low temperature on the fuser

as a repairer of machine I would normally recommend a new fuser unit if you use the machine a lot don't go for a refurbished unit as they just dint last as long but they cost more

hope this helps Ian



50.X FUSER ERROR


alternates with

For help press

A fuser error has occurred.

X Description

1 - low fuser temperature

2 - fuser warmup service

3 - high fuser temperature

4 - faulty fuser

8 - low fuser temperature

(subthermistor

9 - high fuser temperature

(subthermistor)

WARNING: The fuser is HOT. Turn the

printer off and allow it to cool for

approximately 10 minutes before removing

the fuser.

50.1 error - Fuser failure (Abnormally Low

Temperature Main Thermistor), perform the

following steps:

1. The connector between the fuser and the

printer is not connected properly. Reseat

the fuser. Check the connector J5013

between the fuser and the printer. Replace

it if damaged.

2. Break in the main thermistor. Turn the

printer off and remove the fuser. Measure

the resistance between the fuser

connectors J5013LA-2 (MAINTH) and

J5013LA-1 (GND). If it is not within the rage

of 330k ohms to 50k ohms (at ambient

temperature), replace the fuser.

3. Faulty DC controller PCB. Replace the

DC controller PCB.

50.2 error - Fuser Failure (Abnormal Warmup).

Perform the following steps:

1. The connector between the fuser and the

printer is not connected properly. Reseat

the fuser. Check the connector J5013

between the fuser and the printer. Replace

it if damaged.

2. Break in the main thermistor. Turn the

printer off and remove the fuser. Measure

the resistance between the fuser

connectors J5013LA-2 (MAINTH) and

J5013LA-1 (GND). If it is not within the rage

of 330k ohms to 50k ohms (at ambient

temperature), replace the fuser.

3. Break in the fuser heater. Measure the

resistance between the fuser connectors

J5013L-2 (FSRH) and J5013L-1 (FSRN)

with the fuser removed. If it is not within the

rage of 12 ohms to 52 ohms (at ambient

temperature), replace the fuser film unit.

4. Faulty DC controller. PCB Replace the

DC controller PCB

Table 7-3. Numerical printer messages (continued)
338

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HP PRINTER LASER JET 600 ERROR 59.00.90


www8.hp.com/us/en/support.html
http://www.printertechs.com/printer-troubleshooting/hp-error-codes/195-numeric-error-codes-50-59-hp-laserjet

Jun 17, 2014 | HEWLETT PACKARD - LASER JETS HP LaserJet...

1 Answer

HP jet printer 3600 displays error 54.17


Non HP cartridges is not the issue. Maybe you have a defective cartridge. The error is caused by changing the cartridges so you have a clue now. Which cartridge you changed that produced that error, you need to replace that cartridge.

Mar 26, 2013 | HP LaserJet 3600 Printer

1 Answer

HP Laser Jet 3600 it has a 51.23 error I


Try replacing interconnecting cables - flat ones

Jan 31, 2010 | HP LaserJet 3600n Printer

1 Answer

My HP color Laser Jet 3000/3600/3800 is sqeaking


You need to clean the carriage ride path for the cartridge.

Aug 12, 2009 | Office Equipment & Supplies

1 Answer

HP Laserjet 5m, appear error code 50...please help.


Error 50 will be a faulty fuser unit or DC controller board. Try replacing the fuser unit.

May 20, 2009 | HP LaserJet 4m plus Printer

1 Answer

No reports


This can be set in "fax parameters". Do you have the manual?

Jan 09, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
HP LaserJet 3600n Printer Logo

2,744 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...