Question about Uniden Cordless Phone

1 Answer

I have this Uniden cordless phone that has a base for 1 phone and a base for the other phone. 1 Base is sort of a master where it has the answering machine control. The phone that is like the 2nd handset s forever searching and cannot receive or dial out. Please help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 135 Answers

It need to be replace on the master base to recalibrate.

http://www.uniden.com/pdf/DXI5186-2om.pdf


take a look and you'll get what it needs.

remember model number is important to post to find the exact solution needed.

Posted on Mar 24, 2011

Testimonial: "Now the Handset that was searching is able to get back its ID but when I tried to answer a call, it is saying "Out of Range"."

  • Osogama
    Osogama Oct 08, 2011

    try changing the channel. you maybe getting interference from another cordless or wireless device. look for a CH button or channel button and find one that works for you.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find messages/mute?


To hear your messages, press PLAY on the base.
To mute, press CLEAR on the base.

See pages 22 and 6 of the manual: Owners Manual User Guide for Uniden Dect2188 3 Dect 6 0 Cord cordless...

Feb 22, 2015 | Uniden Dect2188-3 Dect 6.0 Cord/cordless...

1 Answer

I gave 240 volt to my 120 volt uniden cordless phone. Smoke came out and obviously it is not working now. How bad I messed up? Any repair work can fix this? What needs to b replaced


Most phone systems use the same AC adapter (wall block) for the base as they use for the remote charging bases. You may have just fried the base AC adapter. See if that is the case with your system and try the working AC adapter with the base to see if it will work or not. Good Luck.

Jan 31, 2015 | Uniden Cordless Phone

1 Answer

Uniden 5.8ghz master to sync a Uniden 6.0 slave


No. Your base works on the 5.8GHz band, while your DECT 6.0 handset works on the 1.9GHz band using a completely different protocol. The two are completely different technologies. It would be like trying to read a videotape using a DVD player.

Aug 21, 2012 | Uniden DCT646-2 Cordless Phone

1 Answer

Uniden base display does not work after chargin for 1st time.



Reset Procedure for Cordless Phones

Question:
0.gif
What is the general reset procedure for cordless phones?
0.gif
Answer:
0.gif
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances

May 05, 2009 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

How to set up uniden phone to base


If the handset has previously worked with the base - press the hangup button and the # key at the same time on the handset for five seconds and follow the prompts to deregister the handset. (System reset - deregister HS - which handset) It will tell you that the handset is deregistered. Then put the handset onto the base and it will register the handset.

Dec 14, 2008 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

Base Shuts Off



You can go to Uniden.com to see the manual for these phones.

Jul 09, 2008 | Uniden 5.8GHz Expandable Cordless Phone...

Not finding what you are looking for?
Uniden Cordless Phone Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...