Question about AGPtek USB External CDROM Drive For LG X110 X120 Toshiba NB100 NB200 NB201 NB205

1 Answer

I have 1 note book LG X120 with windows 7. when im trying to install Windows XP proffessional through a USB CD ROM its showing the following Message * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with windows xp, including those for which you have a device support disk from a mass storage device manufacturer, press s * if you do not have device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with windows xp press enter what should i do? please tell me how to proceed

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 62 Answers

Hi lionking2022!

Since this is a USB CD_ROM, you need change some settings in the bios for it to be detected and the system will actually boot from it.

1. You enter your BIOS

2. Look for the tab that will contain IDE settings

3. Change it to AHCI

4. Save and Exit

You may know try to boot from cd-rom and install your windows xp.

After the setup or installation is finished don't forget to changed it back to SATA or whatever the setting was.

Hope this will help.

Thank you for using Fixya,
avf110686

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Re install your OS as there is no way in.HOW


You need to create a bootable usb drive. depending on what Operating System you want to install, you can easily find how to do that by googling "How to create a bootable usb drive for <your os>"

your OS could be windows xp, windows 7, windows 8, ubuntu, linux mint, manjaro, or any other OS you use for that matter.

You will find several ways to do it and not all of them will work for you. You may have to try about 4 or 5 different ways to do it before you strike one that works for you.

Nov 19, 2013 | LG X120 Netbook

Tip

Error code 7


To resolve this issue:
  1. If you are upgrading Windows 98 or Windows Millennium Edition, follow the troubleshooting steps that are described in the following Microsoft Knowledge Base article: 310064 (http://support.microsoft.com/kb/310064/ ) HOW TO: Troubleshoot Windows XP Problems During Installation When You Upgrade from Windows 98 or Windows Me Test to determine if the issue is resolved. If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to the next step.
  2. Perform a clean installation of Windows XP:
    1. Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive.
    2. If Windows automatically detects the CD-ROM, click Install Windows to start the Windows XP Setup Wizard. If Windows does not automatically detect the CD-ROM, click Start, click Run, type CD-ROM drive letter:\setup.exe, and then click OK.
    3. Press ENTER.
    4. Click New Installation, and then click Next.
    5. Follow the instructions on your screen.
  3. When you receive the "Press F6 to load SCSI/Raid Drivers" prompt, press F7 to bypass Advanced Configuration and PowerInterface (ACPI) detection.
  4. Finish the installation of Windows XP.

on Mar 16, 2010 | Computers & Internet

Tip

How to Install Windows 7 from USB Flash Drive


what if you don’t have DVD-ROM and you are running Windows XP, you might have guessed in this case we can’t install windows 7. Since Windows 7 ISO size is around 2.24 GB so its obvious that you will need to burn windows 7 iso on DVD and another issue is you can’t start windows 7 installation by mounting ISO file on windows XP as Windows XP upgrade to windows 7 is not allowed. In such situation installing windows 7 from USB pen drive is feasible solution.
Here is small guide on how to install windows 7 from USB flash drive or USB pen Drive for Windows XP users.
How to Install Windows 7 from USB Flash Drive Requirement:
USB Pen Drive (Min 4 GB)
Windows 7 ISO (32 bit or 64 bit)

MBRwiz Download and Extract it on your hard drive (Diskpart utility for Windows XP doesn’t detect USB drive as Disk hence we need to use this free utility to make bootable USB drive).
1. Connect your USB Flash Drive to your computer Format USB drive
2. To Format USB Flash Drive Go to My Computer -> Right click on USB drive and select Format from context menu.
3. Now go to Start Menu->run->cmd (Open Command Prompt) and Type following command
convert i: /fs:ntfs (Where “I” is your USB drive latter)

4. Mount Windows 7 iso as drive (You can use Freeware MagicDisc download from here).
5. Type Start->run->cmd
Now dir to directory where you have extracted MBRWiz and run following commands

mbrwiz /list (note down disk number of your USB Pen drive)
mbrwiz /disk=X /active=X (X is Disk Number of your USB Drive)
exit
6. Now open another command window and type following command
J: (Drive letter of Windows 7 iso mounted with demon tool)
CD boot
bootsect /nt60 Y: (Y is drive latter of your USB drive )

7. Now copy all files from drive where you have mount Windows 7 iso
8. Now reboot your computer and press F9 to get your BIOS screen and select USB drive as your boot drive.
9. If every thing goes fine, Your Windows 7 Installation should start from your USB drive.

on Jan 10, 2010 | Computers & Internet

1 Answer

How to install windows xp


To install Windows XP :

Required items
1: Windows XP CD ( SP 1/2/3 )/ Windows XP setup in a USB drive ( please ensure that you have made the USB bootable or it won't be detected )
2: CD Rom Drive ( if you want to install by CD )
3: USB Drive ( if you want to install by USB )


For a fresh install , follow the following steps accordingly :

1: Insert the CD into the Drive and restart the PC.
2: Note that your boot settings in the bios settings are correct (i.e 1st Boot priority CD drive if you are installing with CD and 1st boot priority USB if you are installing with Pendrive ).

3: Follow the steps shown on the screen which will throw a couple of options and settings.

4: Click on ' Install a fresh copy of Windows ' when asked for.
5: Select the drive in which you want to install it , it will be formatted and new windows installation would take place in that same drive.
6: Set your date and time region , enter the serial key when asked for.
7: The whole process should take around 45 minutes.

You are done installing it..Congrats!

Kindly note that installing any version of Windows by USB is always quicker than installing by CD/DVD.

If you want to ask any other question , I am here.................

Oct 28, 2013 | Acer TravelMate 650, 660, 800, 6000, 8000,...

1 Answer

When i insert cd containing widows xp to install it on note book, acer aspire 5315, it says bootmgr is missing. How can i install window xp now?


It may be that the CD is defective already or you are doing it wrong. Try to look for another CD.

To install a fresh copy of Windows XP you need to boot from the CD.
1. Turn your computer on and tap on F12 continuously until you get the One time boot menu. 2. Choose Onboard or USB CD Rom drive. 3. Follow the prompts of the link below:
Windowsreinstall for XP

Jul 04, 2011 | Computers & Internet

1 Answer

How can i install windows xp proffessional?


You will need to make sure you have all the mother board drivers for that system that are compatible for windows xp. check your manufacturers web site or check on your motherboard driver cd if it came with your computer. You will need a win xp cd and also its Product key number.
Once you have these you will need to go into bios and make sure the computer is set to boot from cd/dvd rom - place disc in drive reboot computer -- follow the windows xp installation prompts and instructions

I hope this helps Andrew A

Apr 09, 2011 | NEC Versa VX Notebook

2 Answers

Need Driver for Dell Laptop (Latitude D600) CD drive(LG CRN 8245B)


It should be availble for free download from either the Dell website or the LG website. Just follow links for support and downloads.

Oct 07, 2010 | LG CRN 8245B (CRN-8245B) Internal 24x...

1 Answer

Can not install windows xp in my system send error code 7


try this one:

To resolve this issue:
  1. If you are upgrading Windows 98 or Windows Millennium Edition, follow the troubleshooting steps that are described in the following Microsoft Knowledge Base article: 310064 (http://support.microsoft.com/kb/310064/ ) HOW TO: Troubleshoot Windows XP Problems During Installation When You Upgrade from Windows 98 or Windows Me Test to determine if the issue is resolved. If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to the next step.
  2. Perform a clean installation of Windows XP:
    1. Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive.
    2. If Windows automatically detects the CD-ROM, click Install Windows to start the Windows XP Setup Wizard. If Windows does not automatically detect the CD-ROM, click Start, click Run, type CD-ROM drive letter:\setup.exe, and then click OK.
    3. Press ENTER.
    4. Click New Installation, and then click Next.
    5. Follow the instructions on your screen.
  3. When you receive the "Press F6 to load SCSI/Raid Drivers" prompt, press F7 to bypass Advanced Configuration and PowerInterface (ACPI) detection.
  4. Finish the installation of Windows XP.

Mar 13, 2010 | Computers & Internet

6 Answers

I recently receive my LG X120 with windows XP,


Function + F6 will enable/disable your wifi/bluetooth

Nov 05, 2009 | Computers & Internet

2 Answers

How can i operate intel dot station


Just use a usb key board or use ps2 keyboard by usb to ps2 convertor and open bios function by F2 key and change boot option to usb then use an external cd drive and insert windowsXp cd and follow intruction of installing windows Some notes on changing linux system to windows is here:

http://support.microsoft.com/kb/314458

and this note is also useful for installing windows.

http://www.adobe.com/products/XPinstallnotes.html

Dec 20, 2007 | Intel Dot Station (INTC300AIO) PC Desktop

Not finding what you are looking for?
AGPtek USB External CDROM Drive For LG X110 X120 Toshiba NB100 NB200 NB201 NB205 Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top AGPtek Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you an AGPtek Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...