Question about Fisher Refrigerators

Open Question

.comwhere is the Thermostat in

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

stephanos18
  • 144 Answers

SOURCE: E372B FISHER & PAYKEL FRIDGE WARM

I'd say you most likely need a new defrost element and evaporator Chassis. You'll most likely find there's a big lump of ice behind the evaporator chassis in the freezer inturn blocking the fridge vent or the defrost element is burnt out icing up te Evaporator. It pays to replace both anyway you'll need to unplug the unit and leave the doors opens for 48hrs to defrost it first. cheers

Posted on May 16, 2009

  • 1 Answer

SOURCE: E372B FISHER & PAYKEL FRIDGE WARM

what can i do for the beeb sound coming from my fridge please?

Posted on Oct 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The door alarm of my fisher and Paykel E372B fridge goes off when the door hasnt been opened for a number of hours. How can I stop this.


You would notice that when it beeps, there are a series of beeps, which relate to an error code - also, the temperature panel would be most likely flashing the same amount of times the beeping occurs. The code relates to a component failure that the active smart system is having problems with.

For example, 17 beeps would be error code 17 - which relates to the freezer fan is drawing less current than is expected. Either the wiring is open circuit or the fan is faulty.

Feb 18, 2015 | Fisher and Paykel Refrigerators

1 Answer

I have a fisher and paykel fridge freezer model e372b my power kept tripping a few days ago and I didn't know why we switched the power box back on and it tripped again we turned it back on and it tripped...


Check the power cord on the fridge to make sure it is not broken or frayed. There is an electrical short somewhere. Check the recepticle that is used for the fridge by plugging something else in it, such as a lamp, to see if the receptacle has a short in it.

Apr 27, 2014 | Refrigerators

1 Answer

Hi the model is E372B it appears both fridge and freezer isn't working can we fix this problem ourselves?


NOTE: This
is a multi-solution answer since I don't have all the tech from your question to pinpoint your problem
But the solution is in here generically, if you read and study the solutions very,very carefully.

Sounds like the cold control has stuck . Unplug the two wires from the cold control and plug them together. Turn one wire over and plug it into the other. away from the cold control.
The cold control is the knob in the ref that turns it on and off and has numbers on it. (Thermostat)
If it runs then that cold control (Thernostat) is the problem.
If that doesn't work DO THIS:
The relay on the compressor may need replaced
A relay starts the compressor with a higher voltage and then quickly kicks out
Thats what is happening with yours
Its best for a tech to replace The relay but you can do it
Take your model number to your Local Appliance parts store they will have a diagram
showing you how to install the relay. Its called a hard start relay
also try hooking the two wires together on the cold control to route around the cold control.

If you need more help GO HERE:

http://www.applianceaid.com/procedures.html

Thank you for using fixya
Leo Ponder
PLEASE VOTE FOR ME IF THIS WAS HELPFUL

Sep 13, 2011 | Fisher and Paykel Refrigerators

2 Answers

TMAIL.COMWHERES THE "z" BUTTON/


The "Z" button is located on the "Nunchuck" attachment that connects to the bottom of the Wiimote.

Mar 15, 2011 | Activision Cabela's Big Game Hunter for...

1 Answer

Yahoo.comwhere is my fuel pump fuse located


Hello! Interior fuse box...By drivers left foot or underside of instrument panel...Fuse Letter O (20A)...

Guru.............Saailer

Sep 12, 2010 | 1992 Ford Bronco

1 Answer

.comwhere do i put the


Hi!
Transmission fluid is added to the tranny thru the dipstick tube, you will need a small funnel. Do not overfill.
Don't forget to rate this post!!

Sep 11, 2010 | 1991 Toyota Corolla

1 Answer

Replacing a fridge thermostat of a Smeg FC40RX fridge freezer


DO NOT ATTEMPT THIS METHOD UNLESS YOU UNDERSTAND ELECTRICAL SAFETY. The thermostat is behind the cooling element at the back of the fridge compartment and it connected to the dial at the top front of the compartment that controls its temperature setting. Remove the front plate to access the switch and you will see the wiring that goes to the thermostat. Connect the two wires to the thermostat and if the fridge does not start the thermostat is faulty. Replacements are available, but you may need to do some hunting on line. With the power off this time, securely tie a few feet of string around the thermostat wiring at the switch. carefully loosen the cooling element to free the thermostat and pull it free. Now tie the string to your new thermostat and pull the string back through so the wiring is pulled into place. Put everything back the way you found it and, after a short while, enjoy a nice cold drink.

May 12, 2010 | Refrigerators

1 Answer

Freezer icing up.......fridge doesn't work.


I have the same problem with this stupid samsung RS 2630. Check the defrost sensor that is behind the ice maker box and seems most likely the cause. If this is the fridge and model number, what you need is part No. DA3200006Q. This link from UK will also help you in many ways.

http://www.ukwhitegoods.co.uk/modules.php?name=Content&pa=showpage&pid=209

Nov 03, 2009 | Fisher Refrigerators

2 Answers

E372B FISHER & PAYKEL FRIDGE WARM


I'd say you most likely need a new defrost element and evaporator Chassis. You'll most likely find there's a big lump of ice behind the evaporator chassis in the freezer inturn blocking the fridge vent or the defrost element is burnt out icing up te Evaporator. It pays to replace both anyway you'll need to unplug the unit and leave the doors opens for 48hrs to defrost it first. cheers

May 16, 2009 | Fisher Refrigerators

1 Answer

Refrigerator Compressor hot to touch & fridge/freezer not cooling


you need to do an amp draw with your meter,clamp the run wire on the compressor,you should get 2-5 amp reading,any higher means the compressor is going bad,also should be a locked rotor amp(LRA) reading on comp.-mike

Nov 04, 2008 | Kenmore 53542 / 53544 Side by Side...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Joseph Hoffmann

Level 3 Expert

1702 Answers

Brian Coughlan

Level 2 Expert

275 Answers

Are you a Fisher Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...