Question about Office Equipment & Supplies

1 Answer

I need the wiring diagram for the belkin ps2 keyboard extension cable male to female....mainly the male side. There is 6 pins and 6 wires with shielding. I need the wiring diagram.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,915 Answers

The wiring for PS2 connecters is standard.

Here is a link

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wireing diagram for the cluch wires 1993 katana 750 from the handle bar?


The clutch switch circuit is a yellow wire with a green stripe. The handlebar switch has 2 male bullet type connectors that will pulg into female connectors of the same color. One will be on the harness from the r/h handle switch and I believe the other is on the main harness, r/h side of bike under fuel tank. It dosent matter which goes to which just mate male to female.

Jan 16, 2013 | 1993 Suzuki GSX 750 F (Katana)

1 Answer

Need pin outs for eagle cuda 168


Coda has flat D 6 pin with center pin grd for 4 wire vs old arrow 6 pin round black one. Flat on bottom, count cw 12345 pins w pin 6 center... 2 pin minus 12 v, 4 pin +12v. For other 4 wire like speed/temp... 1 blue, 3(top) white, 5 pin bot right yellow, 6 center ground for spd/temp. White for speed wheel, rest not known. I used 2wire cable and 4wire cable with 2ft pigtails and 3amp fuse in red wire. I used old radio stereo 2 and 4 pin male female connectors at end of pigtails.

Nov 06, 2012 | Eagle Cuda 242 Fishfinder

4 Answers

I have a BTC keyboard, Model #: 9000A. A wire became broken in the PS/2 male plug. I need a Schematic so I can solder on a new plug. I know this is a very old keyboard, but I like it and do not have the...


Unfortunately there is no color code for the cables in the PS2 connector. All the details that I can give you is that if this is the PS2
2fa146b.jpg
The pin #1 moves DATA.
The pin #2 is not connected or DATA2 (usually not connected)
The pin #3 is GND
The pin #4 is VCC for power (+5 VDC)
The pin #5 is CLK for Clock
The pin #6 is not connected or CLK2 (Usually not connected)

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, accept my solution.

Thanks and regards
Stelios
direct fixya link: http://www.fixya.com/users/technical114

Oct 18, 2010 | Computers & Internet

1 Answer

I am in the process of wiring a round five-pin female harness plug on my Road Dog trailer to my 2005 Harley Davidson Road King Classic. I will need a five pin male receptacle and some type of wiring...


Firstly I would not be useing round plugs secondly I would not be wanting to use an adaptor or converter as you call it I would be going with a male & female flat plug. why you ask simply because they are much easier to mount on both your trailer & your cycle eleactricaly one join is safer & far less likely to come apart in service than something with an adaptor in the middle of it as most of the flat variety of plugs are mostly seven pin you wil be left with two unused pins which you can utilise for clearance lights or any other accessory you might care to use later .You will need one pin for common earth one for tail light one for brake light & one for each indicator the easiest way to wire these is to locate the main wireing loom running to the tail light & indicator assemblies determine which wire operates whiich light as you are unlikely to have wire that accurately matches the original I find it use full to draw a diagram indicating the colours onth original loom& their function thenthe colours you have used to run from the loom to the female plug always mount the female plug on the towing vehicle as it is the more weather proof of the two once you have determined your wireing colour code wire the male plug to the trailer makeing sure that th apprpriate wires are conected test as you go is the surest way of getting it right the first time with the satisfaction of a job well done BY YOU qall the best

Mar 08, 2010 | 2005 Harley Davidson FLHRS - FLHRSI Road...

1 Answer

Westinghouse LF708C fault code SE. not spinning. what needs to be fixed?


SE refers to a sensor error, remedies include checking all connections plugs: § The connector (5pin, male, white) in the Wire Harness is not connected to the connector (5 pin, female) of Hall Sensor in the MOTOR. ?_? reconnect or repair the contact in the connector The electric contact between the connectors (5 pin, male in the Wire Harness and 5 pin female in the Hall Sensor) is bad or unstable. ?_ Reconnect or repair the contact in the connector ? The connector (6 pin, male, natural) in the Wire Harness is not connected to the connector (6 pin, female, natural) of PWB ASSY(Main) or the electric contact of connectors is bad/unstable. ?_ Reconnect or repair the contact in the connector ? The electric contact between the connectors ¡a6 pin, male in the Wire Harness and 6 pin female in the controller(Main)¡bis bad or unstable. ?_ Reconnect or repair the contact in the connector ? The Wire Harness between Hall Sensor in the MOTOR and PWB ASSY(Main) is cut(open circuited). ?_ Repair/replace the damaged WIRE HARNESS ? The Hall Sensor is out of order/defective. ?_ Replace the Motor ? The controller(Main) is out of order/defective. ?_ Replace the PWB ASSY(Main)

Jan 22, 2010 | Westinghouse Washing Machines

1 Answer

Everything is unplugged, I just need a wiring schematic to plug everything back in


Does the motherboard have a "purple" socket?
Does your keyboard have a "purple" end?
If so, join the male to the female,
rotating the male until the stiff pins line-up with the holes.

Does the motherboard have a "green" socket?
Does your mouse have a "green" end?
If so, join the male to the female.

The end on the monitor's video-cable has 3 rows of pins;
there's only one place on the computer with 3 rows of holes.
Notice that the sides of the male are tapered,
so that it only fits ONE way into the female.

Similarly, the female end on the power-cord is tapered,
so that it only fits ONE way into the back of the computer.
Note where it connects -- there may be a "rocker" switch,
with a '1' and a '0' on the ends of the rocker.
Press the '0' end down before you reconnect everything.
Press the '1' end down after everything has been reconnected.

Do your PC speakers have a green tip?
If so, then connect the male from the speakers to the green female socket.

Sep 14, 2009 | 3Com Computers & Internet

1 Answer

Rj45 male to db9 male cable for ups


If you have a BackUPS CS, you are probably either using it with the USB cable that is supplied or with the 940-0128A supplied by APC, which permits running the UPS in dumb mode. By building your own cable, you can now run the BackUPS CS models (and perhaps also the ES models) using smart signalling and have all the same information that is available as running it in USB mode.
The jack in the UPS may be easily use a 8 pin RJ45 connector. It is easy to construct the cable by cutting off one end of a standard RJ45-8 ethernet cable and wiring the other end (three wires) into a standard DB9F female serial port connector.
PC Signal PC pin UPS Pin UPS signal RxD 2 2 TxD TxD 3 8 RxD GND 5 7 Ground FG Shield 4 Frame Ground Though these UPSes are USB UPSes, APC supplies a serial cable (typically with a green DB9 F connector) that has 940-0128A stamped into one side of the plastic serial port connector.
Here is suggested scheme of original 940-0128A cable
APC Part# - 940-0128A computer --------- Inside the Connector--------- UPS DB9-F | | RJ45 pin - signal | | Pin - Color | | 4 DSR ->|---+ | | | diode resistor | 6 DTR ->|---+---->|----///---o kill power | 8 Orange | | 1 DCD <-|----+ | | | | 2 RxD <-|----+----------------+--o low battery| 3 Brown | | | 7 RTS ->|----------+--///--+ | | | | | +--///--+ | | | | 8 RI <-|----+----------------+--o on battery | 2 Black | | | 9 CTS <-|----+ | | signal | 5 GND --|-----------------------o ground | 7 Red | | 3 TxD | | | chassis | Chassis/GND |-----------------------o ground | 4 Black | | | Not connected | 1, 5, 6, 9, 10 --------------------------------------

Sep 30, 2008 | Digi (76000200)

2 Answers

Logitech MX3200 wireless keyboard and mouse


Hi...

You're probably going to need a Desktop USB Extension stand or cable if, I assume, you have your keyboard USB Receiver plugged into the back USB port of your desktop. These extension stands often come with your cordless devices (i.e., I got one with my Logitech cordless mouse... I don't need it for my laptop, but I do when using my desktop PC). You can make your own extension by purchasing a "Male-to-Female" USB extension cable, 3 to 6 ft in length (or longer if you need it). Plug the cable into your desktop, place the female end of the cable near where your keyboard is, and plug your keyboard USB receiver into the female USB socket of your extension cable.

Hope this helps!

dawog

Aug 05, 2008 | Logitech Computers & Internet

1 Answer

IBM Clicky Model M Keyboard


Viewing the male connector (on the keyboard or mouse cable), the pinout is:

mini_din-6_male.gif


In both cases, the pins are normally used as follows:

pin function

1 data (yellow)
2 (reserved)
3 gnd (blk)
4 +5v (red)
5 clock(white)
6 (reserved)
try to interchange wire from pin 1 and pin 5 if doesn't work.

Dec 27, 2007 | IBM (02K0806) Keyboard

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

671 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...