I DID THE SELF TEST, IT STOPPED AT C7 AND GAVE A ld code, seems like it won't spin the water out, what's wrong? Can I fix it without a servic e call. I'm a woman, so use simple language that I will understand Thanks

Whirlpool Cabrio Washer Error Codes & Repair Help

applianceassistant.com/Washer.../Cabrio-Bravo-Oasis-Error-Codes.php

Whirlpool Cabrio Washing Machine Error Code Problems, Diagnostics, ... Cabrio LdError Washer is taking too long to drain water from the washtub

Kenmore Elite Calypso Top Loading Washer - ApplianceBlog

www.applianceblog.com/.../1297-Kenmore-Elite-Calypso-Top-Loading-...

Sep 11, 2005 - 10 posts - ‎5 authors
My washing machine stopped after filling and won't wash, drain or spin. ... and then come up with either LD, FL Or SL code and stop working.

Whirl Pool Cabrio LD Temp fix pt.2 - YouTube

? 2:59
https://www.youtube.com/watch?v=tFBtD2wUj4g
Jun 21, 2009 - Uploaded by liquid131
Whirl Pool Cabrio LD Temp fix pt.2. animal131 ... How to override an error code on the Whirlpool Cabrio washer - Duration: 3:08. Whirlpool ...

This washer is supposed to be smart enough to tell us what it thinks is wrong.

Before taking anything apart or calling service I suggest you try and run a diagnostic test cycle. If the test fails then an error code should be displayed.

Here is a link to the complete service manual. Go to 6-1 for the diagnostic test. Keep me posted!

A LD (Long Drain) error code means that (more or less), the drain pump is failing.

C7 C8 76 error code, can be PC board fault, and/or communication fault with remote.

Open link to read one possible solution:
http://waterheatertimer.org/pdf/Rheem-error-code-C7-76.pdf

Open following link for Rheem/Paloma/Richmond/Ruud tankless troubleshoot resources including error codes, self help, manuals, parts links, tips, and contact information.
http://waterheatertimer.org/Troubleshoot-Rheem-Tankless-water-heater.html

Add a comment with your experience so others with same-similar problem can benefit.

Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on water heater or any do-it-yourself project.
Fixya is always less expensive than a service call.

Pressure Switch failure - remove the hose at the top of the machine, and blow in it to clear moisture/buildup.
If not - replace the Pressure switch.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Hi there.I'm just thinking that LD could be a faulty lid switch,have you checked that out?

11 The Gas Shutoff Valve is not opened
completely.

12 Gas Service has been interrupted.
LP Gas is running low. (LP models only)

I think C7 is where the startup sequence ended...and then you get the error code

If less than a month old...contact your customer support

Please see the following Whirlpool service manual for the Cabrio washer.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/409753510a90c8be852571e90073421b/$FILE/8178583.pdf


Ld flashes when the water level does not change after the drain pump is on.
• Is the drain hose or the drain pump clogged?
• Is the drain hose height greater than 96˝ ?
• Is the pump running? If not, see TEST #7.

I just had the same problem. I borrowed my neighbors wet vac. The hose of the wet vac fit right over the end of the drain hose and I sucked out all the remaining water. My hope was that if the hose was clogged that it would clear it out. It seems that it worked. I put the drain hose back in the drain and turned on the extended spin cycle. It was working, so I put the water logged clothes back in the washer on the extended spin cycle and it took the water out. I am now in the process of washing another load to see if it really fixed the problem. I hope this helps.

Is there water in the bottom of the tub? If yes then open back of washer and remove drain pump (on left side) and pull off of tub and clear whatever is blocking its impeller.
If the water is all gone and drained but pump stays on for several minutes and then gives "LD" fault then open back and check the small clear tube that is attached to the tub. Make sure is not blocked with debris and check tube and tub for anything that could block the small clear tube. If these are ok then remove 3 screws in back of the control panel, pull open control panel and check the clear tub all the way up from the tub to the washer controller board (computer) make sure it is not kinked or disconnected. If not then the problem is most likely the pressure sensor on the (computer). This unit will have to be replaced.
You can test the sensor by doing the following: 1. When the "LD" fault comes on start by pressing the pause button. then pull the clear tube off of the computer board. Then attach a tight fitting drinking straw over the sensor. Press the start button and wait for 60 seconds - If the washer does not start the spin cycle on its own after the 60 seconds then **** on the drinking straw that you attached to the pressure sensor earlier. The sucking action should reset the sensor thus telling the computer that the water is drained and it will start the spin cycle. Just remember if you have to do this to get the washer to spin - that means the sensor is damaged most likely from moisture traveling up the tube over time. The computer board will need to be replaced. I believe it costs $205 without shipping. Hope this helps.