Question about Microwave Ovens

1 Answer

I have a Shark Clean Sweeper and need to replace the 7.2v charger. Where can I find this.....I'm running into blank walls.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 210 Answers

Actually, the charger for this 7.2 volt machine probably puts out nearly 9 volts to push the voltage into the battery. It shouldn't hurt the battery to use a 9 volt charger as long as the connectors match up. There are a lot of devices out there now that use 9 volts, so it shouldn't be too hard to find one that would match up with the connector on your sweeper. All the charger/transformers tell the input they use and the amount of voltage they put out.

Posted on Mar 23, 2011

  • Patty Tawzer Apr 20, 2011

    Your solution is helpful, but where would I find such a charger cord. This cord needs to have two very small points or knobs to connect to. Can you help me with this? Thank you

  • Corky's Craft Shop
    Corky's Craft Shop Apr 20, 2011

    Patty,
    If you can get me the model number from the Shark I might be able to find a charger. Send it to my email. Corky

    fixitcr63@yahoo.com

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just changed added water to my steem mop and now it wont make steam


Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101


Apr 16, 2011 | Microwave Ovens

1 Answer

Shark vacum instructions


Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the
Shark Manuals that you need.

heatman101


Dec 20, 2010 | Microwave Ovens

1 Answer

Steam mop not heating


Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the
Shark Manuals that you need.

heatman101

Dec 09, 2010 | Microwave Ovens

1 Answer

Arcing while cooking.


Make sure the inside of the oven is clean and the waveguide cover on the right wall of the oven is especially clean and not damaged. Don't ever run the oven without food in it. If the waveguide cover is damaged it will arc no what but you can probably get a replacement for a few bucks. The magnetron may already be so damaged that it'll never work right again.

Oct 19, 2009 | Daewoo KOC-925T Microwave Oven

1 Answer

Microwave Magnetron tube has arced


REPLCE THE MAG TUBE AND ***

Feb 08, 2009 | LG Microwave Ovens

1 Answer

Need New Microwave


Is the interior flaking the only problem with it?

It can be sanded smooth and clean and dried thoroughly, then you can apply some high-temperature appliance paint, available from places like Wal-Mart, Lowe's or Builder's Square.

Otherwise, if you want to replace it, I would suggest contacting Jenn-Air Customer Care here and telling them your model number.

They can probably give you the model number of a new "drop-in" replacement.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 12, 2008 | Jenn-Air JMC7000 Microwave Oven

1 Answer

Microwave Magnetron tube has arced


If the cavity metal of the oven is chipped or charred, it will have to be sanded smooth and clean and dried thoroughly.

Then you can apply some high-temperature appliance paint, available from hardware stores, department stores or appliance parts stores.

If your waveguide cover is burned, it will need to be replaced. It provides important protection for the magnetron.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 03, 2008 | Microwave Ovens

1 Answer

JMV8208AAS Jenn-Air runs all by itself


check the door connection. it may be stiking. unplug from the wall and open up, spray wd40 and give it a clean.

Dec 13, 2007 | Jenn-Air JMV8208A Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...