Question about Hifonics Brutus BX 1205D Car Audio Amplifier

Open Question

Can the irfz44 work in the hifonic brutus 2005d amp 2000 watts

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 631 Answers

SOURCE: no sound in my Hifonics Brutus BXi 1206D amp

Have you confirmed that you have a good signal feeding the amp?

Have you confirmed that the speakers are in good working order and don't have any breaks in the wiring?

Posted on Jan 02, 2008

blackberries
  • 80 Answers

SOURCE: Need repair or warranty information on Hifonics

http://www.hifonicsusa.com/

they have warranty info any manuals for all amps

thanks

erik

Posted on Feb 27, 2009

  • 102 Answers

SOURCE: hifonics brutus 2000 watt help??!!??

If an RCA took a dive your amp has most likely seen a very nasty input spike and may never be the same as its circuitry has been damaged.....sorry

Posted on Mar 09, 2009

  • 16 Answers

SOURCE: how to bridge a amp brutus hifonics 1200 watt

use the first - and the last + should run at 2 ohm then

Posted on Mar 10, 2010

  • 524 Answers

SOURCE: i have a 2000 watt hifonics brutus amp ...it

there is a step up converter inside the amp that likes to come loose from the board. This may be your problem. Otherwise Check all the chips for burns or disconnect

Posted on Mar 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a xx zeus 1600 rms amp when i plug in the bais control knob the musuc cut of and protect light comes on what can be the cause knob dont even light up


did bias plug come with amp or is this aftermarket?

bias knobs are manufacturer specific. do not assume 1 bias control will work with different amps.

(even though the RJ11 jack is similar, they are wired differently)

your lucky your amps internal circuitry is detecting the short your introducing.

May 08, 2011 | Hifonics Brutus BX 2005D Car Audio...

1 Answer

I have 2 12 inch jl audio w7's with a kicker crossover and a powerbass equalizer 5 bands. i wanted to know if add a hifonics brutus 2100 d class amp to my subs at 1 ohm would it over power my subs. please...


Short answer: NOPE!

The Hifonics Brutus 2100 is stated to produce 2100 watts RMS @ 1ohm load. Most amplifier manufacturers overstate their claims. The 2100 watt output is most likely at 14.4 volts and not the 12.6 volts your car will actually be providing the amp.

But, even if the actual output was 2100 watts that would be 1050 watts to each 12w7. The 12w7's are rated at 1000watts RMS and 2000watts peak. As a MECP certified installer, any system I have done using 12w7's have had a MINIMUM of 1000 watts being provided to each speaker. My personal preference is to run 1500 watts each and keep the gains adjusted lower on the amp. Thus allowing the amp to run cooler and allow the additional headroom for those "show-off" moments!

Dec 22, 2010 | Hifonics Car Audio & Video

1 Answer

How bridge to 1 ohms


for bridge to 1 ohms you need to connect 3 speaker in pararell

Apr 09, 2010 | Hifonics Brutus BX 2005D Car Audio...

1 Answer

Will hilfonics brutus 2010d mono work??


Well with the correct powering system, heaps of paralleled 12 volt Batteries, & a Beefed up Alternator to charge them, I guess so, BUT it is only Mono, so you will need TWO to provide stereo output

Mar 06, 2010 | Hifonics Brutus BX 1605D Car Audio...

1 Answer

I have a 2000 watt hifonics brutus amp ...it worked fine but 1 day it just stopped working..the power light doest light up but the hifonics led lights are still on...whats the problem?


there is a step up converter inside the amp that likes to come loose from the board. This may be your problem. Otherwise Check all the chips for burns or disconnect

Nov 13, 2009 | Hifonics Brutus BX 2005D Car Audio...

1 Answer

Hifonics brutus 2000 watt help??!!??


If an RCA took a dive your amp has most likely seen a very nasty input spike and may never be the same as its circuitry has been damaged.....sorry

Mar 09, 2009 | Hifonics Brutus BXi 1206D Car Audio...

Not finding what you are looking for?
Hifonics Brutus BX 1205D Car Audio Amplifier Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hifonics Car Audio & Video Experts

Professor_V
Professor_V

Level 2 Expert

92 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you a Hifonics Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...