Question about GE Profile JTP56 Electric Double Oven

3 Answers

Double oven control keeps failing

I have replaced the ge double oven control 4 times. I tworks for a while and it gived me an error. sometimes F7 and sometimes asks me to set bake temp on lower oven but the controls are frozen. I have to reset with circuit breaker. The time that it keeps working after circuit reset gets shorter and shorter: from a few days to a few hours.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I went through the same "fixes". Cleaning the contact areas of the ribbon connector with an eraser. Worked for a while,but the metal trace wears away and you lose conductivity and the errors return. I bought a tube of Circuit Writer conductive pen. I traced the worn away lines with the pen and let the areas dry. Five minute job. I even hit it with a hair dryer to speed up the drying process. I reassembled the connector and it works now. I will update if problems re-surface. The solution is re-establishing the trace on the ribbon connector.

Posted on Sep 09, 2008

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 8 Answers

I just wanted to let you know that the fix-it noted in scihelp's post worked for me, too. If you have not tried it yourself, try it. It is a very easy fix-it to do and may save your oven.

Posted on Aug 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

This is a common problem, try http://www.fixya.com/howto/h155060-dreaded_f7_error
it worked for me.

Posted on Aug 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F7 on double wall oven


Hi


Thanks for using FixYa. Error F7 on your oven means that the keypad is shorted or stuck and to resolve this issue you’ll have to replace the Electronic Range control (ERC). Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 23, 2010 | GE Profile JTP56 Electric Double Oven

1 Answer

GE DOUBLE OVEN MODEL #jkp28b0f7bb FLASHES CODE #F7 EC AND BEEPS . WHAT IS MOST LIKELY PROBLEM


F7 indicates a stuck button or the erc electronic range control has failed. First check each button one at a time and feel for a click and full retraction any abnormalties replace the key pad. If that checks out good the erc will need replacing. Here is a link that should help http://appliancehelponline.com/ovenerc.html

Jul 16, 2010 | GE Ovens

1 Answer

My oven has an error code of F7. what is the problem?


Hello there
Any time that you get the f7 error this means
F7 Shorted Clear/Off Key due to membrane switch, control or connector Shorted key panel membrane switch; Check Electronic Range Control (ERC)
repair or replace keypad switxh or erc circuit




Mar 23, 2010 | GE PT956CMCC Profile 30" Built-In Double...

1 Answer

Ge profile performance double oven. getting an F7


F7 is a stuck keypad/button.
Push all buttons at random several times each. This will sometimes un-stick a stuck button.
If that does not work the keypad control will have to be replaced.

Jan 16, 2010 | GE Ovens

1 Answer

F7 error code


Hi
On a GE range oven F7 indicates either a function pad button is stuck or the clock on the oven is malfunctioning

On the 99 Range oven F7 indicates a shorted Clear/Off Key due to membrane switch or a shorted control or connector

On the GE XL44 Self Clean Oven F7 is Stuck keypad or control relay malfunction
check out more detail here
http://www.fixya.com/howto/h155060-dreaded_f7_error
hope this helps

Aug 14, 2009 | GE Profile JTP56 Electric Double Oven

1 Answer

The F7 code appears with a beeping noise. How do I turn off the beep for good.... selecting clear/off only works for a few seconds


Hi,

Well, F7 error code occures due to
A = Function pad button stuck or 
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

Replace the ERC there are ten screws 3 on each side and 4 on the control leave the hex screws alone all you need is a phillip screwdriver.
REMEMBER TO SHUT OFF THE POWER FIRST lift and fold out the control panel remove the ribbon cable and remove the four screws that hold the control board . replace control panel in reverse order.

Thanks

May 27, 2009 | GE Built-In 24" Double Electric Wall Oven

1 Answer

Double GE wall oven - F7 code


from repairclinic.com:

F7 A = Function pad button stuck or
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)
It looks like you have a function button pad stuck or a bad clock.

Unstick button or replace electronic range control.

Apr 27, 2009 | GE Ovens

1 Answer

F7 beeping an cannot stop it... any solutions?


HI, if this error code cannot be canceled, this will confirm a touch pad issue. the membrane is damaged and, this will require you to replace the ERC.

Replacing the Electronic oven control will fix this issue.

Mar 29, 2009 | GE JKS05 Electric Single Oven

2 Answers

Error code F7 keeps coming up, what does this mean?


F1 error and beeping. Don't bother getting GE out there. Cost me $90 to learn they don't make the clock. WOuld have been $500+ for the control panel anyway. Better off just buying a new one. Planned obsolescence I guess. I won't buy GE again.

Mar 16, 2009 | GE JKP27 Electric Double Oven

1 Answer

My GE profile oven is giving me a code f7 and I can't clear it.  What does this mean?


Hi there,
Well, F7 error code occures due to
A = Function pad button stuck or 
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

Replace the ERC there are ten screws 3 on each side and 4 on the control leave the hex screws alone all you need is a phillip screwdriver.
REMEMBER TO SHUT OFF THE POWER FIRST lift and fold out the control panel remove the ribbon cable and remove the four screws that hold the control board . replace control panel in reverse order.
Best of luck!!
Thanks

Dec 02, 2008 | GE Profile JTP56 Electric Double Oven

Not finding what you are looking for?
GE Profile JTP56 Electric Double Oven Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...