Question about Kenmore 23313 Whispertone Bagged Canister Vacuum

1 Answer

Push the reset button

I pushed the reset button on the vacuum but it doesn't stay in and the belt doesn't work

Posted by on

  • mcfoote Dec 23, 2008

    Same problem. I pushed the reset button on the vacuum but it doesn't stay in and the belt doesn't work. Looking for a copy of the manual.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Sounds like a problem I had. However, I took the vacum head apart were the belt is to get to the switch that was sticking. the model # on this part is:

Mel Rain/littel fuse
742332
11200000-04
HOLD 2.0 A.
125 V.D.C. / A.C. 60Hz

I took the two connectors of and carfully removed the part. After removal I took apart with a small flathead screwdriver and reset but this is a quick fix and my vacuum begin to work again!

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bissel com


Push the reset button on the back of the machine. If it comes on after resetting the button it means there may be a clog or restriction somewhere.

Aug 17, 2013 | Fuller Brush FB75T Upright Vacuum

2 Answers

Dyson DC14 reset button location


go to http://content.dyson.com/support/?basketTotal=0.00&basketQty=0&logged=false
proceed with your models, and see videos or troubleshooting or video for to se the reset button.
God bless you

Aug 02, 2012 | Dyson Ball DC24 Bagless Upright Vacuum

1 Answer

I have a riccar vibrance red vacuum, just purchased with in 6 months and the roller brush wont go on and the reset button doesn't seem to push in or work I now live in Hankinson, ND 58041...there is a...


The reset button only pops out if the vacuum motor overheats. It does not affect the brush roll. If the motor is running the problem is most likely a broken or stretched belt.

Jul 26, 2011 | Riccar 8955 Upright Vacuum

1 Answer

Power button won't stay down.


Hi there,

Sorry to hear you're experiencing a problem with the power button on your DC25.

In case you haven't tried this, give the button a firm push all the way down. If this doesn't resolve the issue, please get in touch with us, free, on 08002980298 (UK), or 1866MYDYSON (US) so we can help.

Kind regards,

Jack
Dyson Customer Service

Feb 24, 2011 | Dyson DC25 Animal Bagless Upright Vacuum

1 Answer

I've had my Kenmore Progressive canister for at least several years and never had a problem. Now, the carpet head brush does not rotate, it's not getting the connection unless I push down maintaining...


Hi, try pushing the reset button with a pen or paper clip. If that doesn't work, the motor may need to replaced. If the reset button is stuck, if the reset button is stuck, use a pair of tweezers to pull it back out......

Secondly, your belt can also be broken or has come off the pulley. Remove the bottom plate and investigate.

Sep 19, 2010 | Kenmore 25512/ 25513 Progressive Canister...

1 Answer

Eureka Boss - Belt is not broke but brush will not turn. I have already turned it over - checked belt - and pushed the reset button.


The belt may look fine but they can still be stretched or worn and it won' turn the brush. Try changing the belt and see what it does. You can get Eureka belts here:

Eureka Replacement Vacuum Belts

Nov 07, 2009 | Dyson DC14 Animal Bagless Upright Cyclonic...

1 Answer

The power head does not work and the reset light is illuminated. Is this an easy fix and if so, what do I need to do?


When that happens, push the reset button to tell the motor that its ok, and reset. If you picked up a corner of carpet and lock up the brushroller, that's why that happened. Also, it could be a belt issue.

If you push the reset button and still nothing.. it's the belt. Have a look and see if it is the belt. If so, it's easy to replace the belt.. If the belt is fine, meaning it's tight and isn't wiggling around, then you most likely broke it.

Aug 14, 2009 | Vacuums

2 Answers

Electrolux vacuum power bar not turning


First thing is to push the circuit breaker button(reset button). If that dosen't work, check the belt. It could be broken.

Jul 10, 2009 | Electrolux Guardian Bagged Canister Vacuum

Not finding what you are looking for?
Kenmore 23313 Whispertone Bagged Canister Vacuum Logo

Related Topics:

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Roger Potts

Level 3 Expert

694 Answers

yadayada
yadayada

Level 3 Expert

60971 Answers

Are you a Kenmore Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...