Question about Toshiba MK8025GAS Hard Drive

2 Answers

Keep clicking with red light on, computer can't see it

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 27,725 Answers

If the clicking noise is coming from the hard drive
the clicking noise is the reader arm jumping across platters on your hard drive you have a dirty hard drive first clean all the dust from your computer specifically from around your hard drive using a high powered suction vacuum cleaner or a fine air blower from a air compressor making sure there is no MOISTURE in the air lines then give the hard drive a firm tap on the side to free it up
test or replace all the leads that attach to your hard drive including electrical extensions IDE,SATA and the ones that attach from your (((motherboard to hard drive))) make sure the connections are securely seated and they are not bad/faulty and no dust built up or replace them
one bad lead can cause a computer lots of problems failing to detect reboot restarting on a cycle
hope this helps

Posted on Mar 23, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 56 Answers

The hard drive is dead. You will need to replace it.

Posted on Mar 23, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won't turn. on red standby light changes to on but then goes right back red


TV won't turn on - Forums - CNET

www.cnet.com > Forums > Samsung

CNETJun 11, 2015 - I have the Samsung FP-T5084 50" Plasma tv. I went to turn it on the other day, and it wouldn't turn on. No clicking. No red power indicator light. Nothing. Samsung TV LN52A650A1FXZA won't turn on, keeps clicking
Jun 11, 2015
Samsung TV won't turn on
Jun 11, 2015
Samsung LCD TV LN32A330 power won't turn on
Jun 11, 2015
Samsung Plasma TV - Won't turn on
Jun 11, 2015
More results from www.cnet.com

The power light keeps flashing and the tv wont turn on - TV ...

www.tomsguide.com/answers/id.../power-light-flashing-wont-turn.html
If you unplug for a minute and hit the power button it sound like it is coming on then it shuts off and the red power light flashes slowly. The TV is a Panisonic 1080i HDTV, about 6-7 years old. ... I have an old type sony tv with the big back and the red power light keeps flashing and ...

How do you fix a television that won't turn on? - Ask.com

www.ask.com > Technology > Television & Video

Jan 03, 2016 | Televison & Video

1 Answer

My tv keeps saying stand bye and it won't cut on all its doing is making the click noise and the red light keep blinking


Try unplugging it for 30 seconds and see if it resets. If not, take the model # and get on the internet for the manual and go to trouble shooting page. It should answer your questions

Feb 13, 2013 | Televison & Video

4 Answers

Two red light are blinking and show general error


Hi. My epson T50 printer is flashing together two orange lights showing general error, have reset ink pad with software but still the same problem. Any ideas would be great. Thanks Jim

Mar 13, 2012 | Epson T50 InkJet Printer

3 Answers

For some reason the light above the WPS button keeps flashing red. I have tried multiple reboots, none of which have worked. when connected to the ethernet modem, the light stays as a solid red color.


You need to reset your Router before setup manually.


To restore the router to factory default settings, please do the following:
1. Unplug the router's power supply
2. Press and hold the reset button on the bottom of the router
3. Keep the reset button depressed and, at the same time, plug the power supply back in
4. Keep the reset button depressed for another 10 seconds
5. Release the reset button
======================= Manually configuration ==============================

Step 1 : Connect modem - Router - Computer ( Wired )
Step 2 : Open router setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left side under internet WAN click Connection Type
Step 4 : leave the Password Blank and click submit
Step 5 : Choose the connection type as dynamic and click next
Step 6 : Leave the Host name blank and click apply
Step 7 : On the left Under Internet WAN Click MAC Address
Step 8 : Click Clone and Click Apply changes
Step 9 : If the Internet status on the top right is connected
Step 10 : Then check if you have internet
Step 11 : if not Then unplug the Power Cable from the Modem And the Router
Step 12 : Plug the power Cord to the Modem
Step 13 : Wait till all the lights are on
Step 14 : Plug the power to the belkin
Step 15 : Check the color of the light in the belkin
Step 16 :If green then Check if you have internet
If not working then call belkin


WIRELESS SETTING UP A WIRELESS CONNECTION

Step 1 : Connect Router - Computer ( Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left under wireless click wi - fi protected setup
Step 4 : Leave the password blank and click on submit
Step 5 : Disable it and Click on apply changes
Step 6 : On the left under wireless click Security
Step 7 : Enable 64 Bit WEP
Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )
Step 9 : Click apply changes
Step 10 : on the left under wireless click channel and SSID
Step 11 :Change the Wireless channel to 6
Step 12 : Change the SSID to a different name ( no Spaces )
Step 13 : Click apply changes
Step 14 : Now Scan and connect to this network ( Wireless )
Let me know if it works

Aug 16, 2010 | Belkin Wireless Play Router (F7D4302)

1 Answer

The on button keeps flashing and the red light stays on


Try resetting your Canon PIXMA. Here's how:

  1. Turn the printer off.
  2. Hold the button Resume / Cancel (red triangle in the circle), click POWER - indicator lights green.
  3. Release the button Resume / Cancel, keeping POWER.
  4. Click Resume / Cancel 2 times, keeping POWER, and then release all the buttons.
  5. When the indicator light Green - click Resume / Cancel 4 times!
  6. Turn the printer off button POWER.
Have a good evening!

Jan 12, 2010 | Canon PIXMA MP170 All-In-One InkJet...

2 Answers

The red light keeps on flashing


HI-

Turrn off the printer then unplug it for a few minutes. replug it then try pressing the maintenance button once or press and release it, if it doesnt move to position where you can change it press on it again. If this doesn't help. Go to start on your computer, go to setting then control panel, click on printers and faxes( then right click on the printer icon and left click on printing preferences then) look for utility or maintnance tab then there should be an option to replace ink cartridge.

Keep me posted

Sep 15, 2008 | Epson Stylus C43SX InkJet Printer

1 Answer

Set wont turn on red light just keeps blinking


this is a malfunction of the power supply block (inside your TV-device),or over load of it.please contact the nearest repair shop.

Aug 08, 2008 | Sony Televison & Video

1 Answer

Won't load game keeps blinkng red light


If the XBOX 360 is blinking the color RED in three of the four quarter of the ring around the power button, you will have to contact Microsoft for a replacement. This is what is known as "Red Ring of Death." You can find plenty of information on it if you Google it.

Click HERE for a video of the Red Ring of Death.

Click HERE for Microsoft's support system for the XBOX 360 and get in touch with Microsoft to get your replacement started.

It's the ONLY way.

Good luck.

Cyryl

Dec 10, 2007 | Microsoft Xbox 360 Console

Not finding what you are looking for?
Toshiba MK8025GAS Hard Drive Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...