Question about NetGear WNDR3400 N600 Wireless Dual Band Router (WNDR3400100NAS)

1 Answer

Hello all, I recently purchased a Netgear N600, WNDR 3400 dual band router and I am having issues with the internet connection at the moment. The first few days, the connection was great but all of a sudden this morning, it was super slow. It shows as being connected and pages will load but just very, very slowly. I'm not really sure what the issue is; I ran into this same problem upon setting it up and called my ISP, Comcast, and they did a modem reset which cleared the problem but I think the problem is probably more related to the router after experiencing this for a second time. I'm posting this from a work computer due to the connection issue at the moment. Any advice on how to set it up to perform optimally all the time? Thanks in advance for any help you can give.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

It's normal. Your NetGear firmware need an update. You should have firmware version Download here.

Posted on Mar 23, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How do I connect my HP Photosmart C4795 Printer to my new Netgear N600 Router?

Hello Janet,

Please click Wireless printing center to access more info on how to connect you printer to a netgear router ( wireless )

Dec 23, 2013 | NetGear N600 Wireless Dual Band Router...

1 Answer

Im having problems connecting to the internet after i got a netgear wireless dual band router to my pannaway modem

First check that router light is blinking. If not, need to repair or replace.

If light is blinking, you need to reset it. There will be a reset button back side of your router, press and hold it for 30 seconds. Restart your router and reconfigure.

Also check that you had enabled wireless setting. Ask here if problem still occurring

Feb 24, 2013 | Computers & Internet

1 Answer

Wndr 3400 is running slow


chek your speed with a comercial site that chek your speed
if the speed is fix and slow - the problem can be with the providers limits

if the speed change all the time it can be an common user area - you are sharing the internet speed with other people


Jun 03, 2012 | NetGear WNDR3400 N600 Wireless Dual Band...

1 Answer

Lost passkey to my Netgear N600 Double Band Router wndr 3400

Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
The default login = admin
The default PW = passwordYou can now change the default admin password and configurethe wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.or passphrase etc.
Apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-

Apr 04, 2012 | NetGear N600 Wireless Dual Band Router

1 Answer

I have a new Netgear WNDR 3400 router. PS3 and iPods connect to internet. Toshiba laptop receives the router signal, but wont connect to internet. help!

Most likely a DHCP or DNS problem on the laptop. To confirm this open a command prompt Windows Button > type "cmd" <enter>. Now at the command prompt type "ipconfig". Scroll up to the top of your output and you should have an "Ethernet Local Area Connection". Your IPv4 address should start 192.168.x.x. If yes you are getting a valid assigned IP via DHCP, if you get 169.x.x.x then you are not. To fix Click windows button > All Programs > Accessories > right click command prompt and click "Run as Administrator". Now type "ipconfig /release" followed by "ipconfig /renew". Give it a few moments and check to make sure you get a 192.168.x.x IP now and you should be good.

Nov 10, 2011 | NetGear WNDR3400 N600 Wireless Dual Band...

1 Answer

Hello my computer is recognizing the router netgear 3400 , the connection is working without the router but it's not going through it .

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

Feb 17, 2011 | NetGear WNDR3400 N600 Wireless Dual Band...

2 Answers

My internet keeps goin on and off with my new netgear N600 wireless dual band router. is my home too large for this unit? any help or suggestions?

Never buy Netgear. They design product so it won't work unless you pay more for technical support. They told me the technicians during the 90 day warranty are not good enough to fix problems, so you can't get solution until warranty runs out and you have to pay extra!

Nov 26, 2010 | NetGear WNDR3400 N600 Wireless Dual Band...

Not finding what you are looking for?
NetGear WNDR3400 N600 Wireless Dual Band Router (WNDR3400100NAS) Logo

1,365 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides