Question about Sanyo DP46849 46 in. HDTV

1 Answer

DP46849 has black screen with power light on. Dish network is working as remote tv is operational. Pushing any button on either DISH or Sanyo remote causes power light to blink. No sound. Power light blinks by its self every few minutes.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

It may be in safety shut down mode due to shorted circuits or power supply failure due to such thing as bad DC filter caps. You will need to do in-depth troubleshooting.
See www.shopjimmy.com if he has the picture of the boards.
Please read my guides also.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.

Posted on Mar 23, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo TV Code for Dish remote 21.0 IR/UHF PRO only operates TV Power and Volume Functions.


Hello Witt Thomas,

I can understand the concern and wanting the remote to work the TV Menus. It is possible with our remotes, however it depends on the TV itself. I've seen instances where there are 2 TV's in one house, and 1 will do it, while the other won't.

If you have tried all of the remote codes, and none work, the only other options we have available are to try a powr scan, or teach the remote. This link http://www.mydish.com/support/teach-learning-remote-20-21 can provide the steps on how to teach that model of remote control!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

Jan 16, 2013 | DISH Network ES161256 21.0 IR / UHF Pro...

3 Answers

Does anyone know the remote code for a sanyo tv model dp42647 on a dishnetwork remote


Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes
Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...
My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...
Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya


Jan 09, 2012 | Sanyo 42 in. LCD TV

1 Answer

Programming my remote control (which is a dish network remote control) to operate my 42" sanyo LCD


In order to program the remote to a TV set, hold the clear "TV" button in the upper left hand corner four four seconds or until all four of the mode buttons light. Next press in one of the three digit codes below followed by pound (#) Remote codes: 590, 683, 720, 591, 543, 593, 813, 542, 533, 652, 726, 611, 500, 503, 627, 661, 956, 591, 694, 666, 252 After trying each code press the volume and power buttons, if they control your TV set be sure to press the "SAT" button.

Daniel Busa
DISH Network
Customer Service

Aug 28, 2011 | Sanyo 42 in. LCD TV

1 Answer

NEED A CODE TO PROGRAM DISH NETWORK 5.4IR REMOTE TO OPERATE PHILIPS HTS3565D


Hello! My name is Becki, with DISH Network. Programming the remote to the TV is a pretty easy process. I have given some codes that should work to program the remote. If not, please let me know!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

566
828
824

Becki Barned
DISH Network Customer Service
becki.barned@dishnetwork.com

Jul 13, 2011 | DISH Network IR Remote Control

2 Answers

What is my tv code for programming my dish network remote.


Hi!

Welcome to FixYa!

You can use these codes to program the Dish remote control to your Sanyo DS32920:
542, 589, 590, 591, 592,609

You may also try Power Scan Instructions. Please follow the steps bellow.

1. While at the TV locations (TV1 or TV2 depending on which key is installed), point the remote at the TV. Press and hold the TV MODE button on the remote until all four MODE buttons at the top of the remote light up.

lor04_0.png
2. Press the RECEIVER POWER button on the remote.

lor04_1.png
3. Press the UP ARROW on the remote, about one press every two seconds. Stop as soon as the TV turns off. This process may take several minutes.
lor04_2.png
4. Press POUND (#) on the remote. The TV MODE button will flash three times.
lor04_4.png

5. Press TV POWER on the remote to turn on the TV. Press VOLUME on the remote to confirm the remote controls the TV. If this does not work, return to Step 1.
lor04_5.png

Keep me posted.

Thanks.
Lor04

Apr 07, 2011 | Sanyo DS32920 32" TV

1 Answer

Can you tell me the 3 digit nunber to make my dvd/vcr compatable with dish network tv?


We would be happy to help you with getting your DISH Networkremote to control your Sanyo DVD/VCR combo unit. Pressand hold the VCR/DVD button located on the top of your remote until all mode buttonback lights come on, then release. Use the number buttons to enter thecodes for your Sanyo DVD/VCR combo unit; here some of the codes we currently have: 549, 583, and 608. Press the pound (#) button. To check that the codeworks try several different functions on the remote to make sure it willproperly operate the TV. Keep in mind that some codes may not be compatiblewith your equipment. If this is the case, try the other codes listed for thatdevice until you find one that is compatible with your equipment.
If you were not able to get your DISH remote to work with it with the codes provided, try a power scan. Pressand hold the VCR/DVD button located on the top of your remote until all mode buttonback lights come on, then release. Press and release the power button. Press the Up button once a second while pointing the VCR/DVD combo unit. If the code for the equipment comes up, it will power off. Press the pound (#) button.
We hope this help and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Feb 04, 2011 | Sanyo DVW-6000 DVD Player/VCR

1 Answer

My 1.5 IR Dish remote has all of a sudden stopped working with our Sanyo tv. I've changed the batteries. When I push the power button it will only light up the VCR button if anything at all. Our other...


sandyannsamp

If the VCR button lights up when you press the Power button, you are not in the correct mode to operate the TV. If the remote is programmed correctly, when you are in SAT mode, you can press the large RED button to turn your receiver off/on. The RED TV button will turn your TV off/on. I have provided links to program your remote to your TV again. I have also provided codes for your Sanyo TV.

Instructions to program your remote to your TV (begin with step 6):

http://www.dishnetwork.com/SupportSection/remote-setup
Here are the TV codes: 590, 683, 589, 542, 652

I hope this helps.

Ray Calo
DISH Network

Nov 18, 2010 | DISH Network IR Remote Control

1 Answer

Need free help. How do I program a dish network remote to operate my sanyo DP19648 tv? I lost the code sheet.


I hope that this has been resolved, but if not, here are some simple steps to help you out. The link below will walk you through a power scan. The power scan scans through the codes on the tv until it reaches the correct one.
Power scan:
http://www.dishnetwork.com/SupportSection/power-scan-instructions

Here is another link to the codes for each brand of tv. You will need to follow these steps:
1.Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3-digit code
3. Press the Pound (#) button below the number 9 on the numeric keypad
4. Try to power the tv off/on, and try the volume. If one or all of these do not work, proceed back to step 1 with a different code.
5. Once all functions work, press the SAT button on your remote, and you are all set
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml


Becki Barned
DISH Network Customer Service

Sep 21, 2010 | Sanyo DP19648 19 in. LCD TV

4 Answers

Dish network remote code for Disney 13" TV


On your dish remote, press and hold the tv button until all 4 buttons light up, then release. push either of the power buttons once. Now start pushing the down channel button, It's the one right below select, continue pushing it until tv turns off. When tv goes off push down button one more time then push up button, when tv turns back on stop and press # key, tv light will flash 3 times and should be set. Note....if u press down button and tv does not turn off after going through all codes( tv light will start flashing) press cancel and try again only channel up this time. hope this helps.

Dec 31, 2008 | Disney 13" TV

1 Answer

Sanyo FXRG Remote


Have a dish network box. ( EDGESTAR) and my remote broke. i am trying to get the code to program the AUX button to work for the dish. on my Sanyo FXRG remote. please help me!

Apr 20, 2008 | Sanyo DS27510 27" TV

Not finding what you are looking for?
Sanyo DP46849 46 in. HDTV Logo

876 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...