Question about Maytag MVWB300W Top Load Washer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Unfortunately if you do not have a good locksmith, you will have to drill out the locks and replace them. Not a cheap solution by any means.....If I can help further, I am here.... Eric Campion
Posted on Feb 27, 2009
it is probably money in the pump. I have had my washer for two years now and an on the second pump. I had to call a serviceman to take the pump loose and dump out the change. It had 81 cents the first time and 26 cents the second. I need to call him again but I think I am going to try to do it myself. $85 a service call is just ridiculous when I know what the problem is.
Posted on Oct 15, 2010
Tips for a great answer:
Dec 03, 2015 | Washing Machines
Oct 18, 2013 | Washing Machines
May 06, 2011 | Maytag Neptune MLG2000A Front Load Stacked...
The main center bearing is going bad that's why it is not wanting to spin as fast and is also making the loud noise when its spinning i.e. sounding like a jet engine firing up or metal grinding noise. I would not repair this very expensive cost around $300 to $600 to fix I would go buy a good quality used one or a new one sorry for the bad news but that's what it is I see 2 of these a week in my shop same problem but hope this helps.
Jan 07, 2011 | Maytag PAV2300 Top Load Washer
Oct 12, 2010 | Maytag Bravos 3.8 Cu. Ft. Washer
Apr 08, 2010 | Whirlpool GHW9100L Front Load Washer
Oct 09, 2009 | Maytag Neptune MAH5500B Front Load Washer
Oct 05, 2009 | Maytag MAV4755 Top Load Washer
Nov 16, 2008 | Maytag Atlantis MAV6000 Top Load Washer
Jul 10, 2010 | Maytag MVWB300W Top Load Washer
162 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: