Question about Evenflo ExerSaucer SmartSteps ABC Stroller

2 Answers

Directions needed I seem to have all the parts, but can't figure out how to put together. Mainly, what do I do with the springs. My niece had this for her child and gave to me but had to disassemble to bring it home. HELP :-)

Posted by on

  • Anonymous Aug 18, 2008

    Not sure where springs go



2 Answers

The big sprigs go between the yellow cup on the top of the legs and the blue table. this is done to ake the exersaucer bounce.

The small sprigs with the hooks are clipped to the blue cups at the ottom of the legs and screwed to the green/yellow base. this is doe to keep the legs from rotatig when unwated.

Posted on Aug 29, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Go to retrevo they'll have instrucitons for ya

Posted on Aug 03, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where can i get manual for assembling cardinal models10 fishing reel

do you till have the box it came in.many reel companies printed the diagrams on the inside .

Mar 28, 2015 | Abu Garcia Cardinal S Spinning Reel, Reel...

1 Answer

The nut which holds the quick release latch which is spring-loaded on the top of my Maxell tripod fell off and I can't seem to put all the part back together so it works correctly.

You could give us a call at Spartan Photo Center, we might be able to guide you through putting it back together. You could also ship it in to us and we could put it back together for you. You can contact us at 864-583-6835

Feb 18, 2013 | Camera Maxell Tripod With Bubble Level 20"...

1 Answer

The spring clip came out of my craftsman 135.17243 scroll / jigsaw and i do not know how to put it back together.

I have the same problem. The link to the Skill saw shows the parts, and the price of the leaf spring is on the right (it's the same as the Sears). Here is the Sears parts link I bought the leaf spring, but can't figure out how to keep it in place. Old spring was worn, and broke when I tried to put it back in. I'm not sure if there are any part's missing, but don't see anything extra in the diagram that I don't have. If you have figured it out, please post a solution.

Mar 03, 2012 | Garden

1 Answer

Need instruction to put crib together

1.Find and read the instructions carefully before doing anything. Become familiar with the instructions so that even if you do not remember everything, you have a basic idea of how to proceed before you start. Look on the manufacturer's website for directions if you have lost the original instructions.
Assemble the parts. Make sure you have all of the parts and all of the screws that are listed in the instructions, and that they are in working order. Lay out the parts so that everything is where you need it and you can clearly see all of the parts.
Set up the head and foot boards and attach any stabilizing bars. Some springs attach directly to the bed and some are movable, so you will either attach the spring board or you will attach the pieces that the spring board sits in if they are not part of the crib already. If the spring board is movable, put it on the setting that is the correct height for your infant (higher for newborns, lower for older babies).
Attach the back of the crib that is stationary and does not move up or down. The front part of the crib often is adjustable and lowers and raises back to a stable position. You may have to install rails for this part of the crib, then install the front portion onto the bars and then screw the bottom of the rails into the crib.
Put the mattress in the crib and make sure it fits. Test the crib by feeling to make sure that it is steady and not going to come loose. Make sure all of the screws and bolts are tight and that none are sticking out in any way. Make sure there is nothing that could hurt the infant such as any sharp edges or splinters

Jul 27, 2011 | Toys

1 Answer

I have a lionel automatic ore loader(6-12712) with no directions as how to assemble it or how it works. i did get it together using the pictures on the box,but have a tiny spring left over-no idea where it...

I know this is more than 2 years late, but if you still need the directions to the ore loader, I recently acquired a broken ore loader at a garage sale. While most of the parts were either broken or missing it did have a complete set of instructions I would be happy to scan and email.

Apr 11, 2010 | Toys

1 Answer

Feed switch came apart, seems to have lost spring out of wirewhip

sounds like you lost a spring i would just get a new gun

Jun 26, 2009 | Welding Tools

2 Answers

Know how to put the ice bin latch and spring back together

I had the same problem. When you put the spring back on the little arm towards the button, use a mini screwdriver or something to pull the spring back and pop the latch part back in the indented spots. Then, it will seem stuck but you just put some pressure on the curved side of the latch - opposite from the button and it will "pop" back into place.

Apr 04, 2009 | Kenmore 57029 Side by Side Refrigerator

2 Answers

Cant get it back together

I put together what I knew where it went, the put the whole thing together and looked at it before putting in the screws. I saw a hole and remembered a "button" there that moved sideways with a spring pushing it back into the original place. I reopened and after examining the part put it in that slot. I then put it together and it worked. I put the screws back in then and all is well
Thank you for the reply.
Glad I found your site. I will keep it if I ever need any help.

Oct 11, 2008 | HP Wireless Optical Mouse

Not finding what you are looking for?
Evenflo ExerSaucer SmartSteps ABC Stroller Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Evenflo Baby Gear Experts

Joyce Nokleby

Level 2 Expert

70 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Vic Fkiaras

Level 1 Expert

18 Answers

Are you an Evenflo Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides