Question about Summit Appliances Division SPWD1470C Front Load AllinOne Washer Dryer

Open Question

I have a summit spwd1470c and I have gotten the "ec4" error code. The issue started 2 nights ago i did a small load of laundry on standard setting and dried it and the clothes came out warm but still soggy, not saturated but wet. I put them in the dryer again for half hour and they still came out damp. I figured ok maybe it was just a very dense amount of clothing. I put in another load consisting of 2 tee shirts, and 2 long sleeve tee shirts and set it for a quick was and dry, again they came out damp. I put them in the dry for an hour and when i checked later the clothes were wetter than when they originally came out the first time. I tried running the machine empty and found that the glass is getting hot. i tried drying the clothes again and the error message "EC4" came on. I can feel that the dryer is making heat and the clothes do come out warm but damp. And the last load when i put it to dry the second time they went in damp and came out soggy. I have checked the lint trap and there is no lint in it at all, however every time I open the lint trap water spills out of it on the floor, like the water level is too high. I have checked and watched the water drain out of the drain tube when washing and when drying. How is my dryer causing things to get wetter?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag Bravos Quiet Series 400: F01 Error code


maytag washer with error code F01 means a obstruction in a hose or tube, not a control panel issue like people say. How can I clear the small tube? see pics


26390115-bszy215dbxllk1sw2ym4qmfg-4-0.jpg

26390115-bszy215dbxllk1sw2ym4qmfg-4-2.jpg

26390115-bszy215dbxllk1sw2ym4qmfg-4-5.jpg

26390115-bszy215dbxllk1sw2ym4qmfg-4-9.jpg

26390115-bszy215dbxllk1sw2ym4qmfg-4-14.jpg

Dec 08, 2016 | Maytag Washing Machines

1 Answer

Summit washer/dryer combo quit drying. Repairman came and replaced themafuse and thermastat kit. Shortly thereafter, the dryer cycle timer would indicate 10 minutes left and never clock down. The dryer...


summit washers are prone to board failures i would say that is where the fault lies . thermafuse fuse means it has been overheating. means it can damage other parts. thermostat would thing that has just worn out thermostat can go if the unit overheats. under line is an electrical fault. but like i've said it is a common fault with this make and others. the main boards can only handle around 50c in temp after that they start to over heat and cause problems. the faults started when they moved the main board from the bottom to the middle.

Oct 25, 2013 | Summit SPWD1470C 24 Inch Washer Dryer...

2 Answers

Do not know how to work it


Front load washers are way different. Put your clothes in, put your detergent in the dispenser drawer.... shut the door, select cycle and press start or the cycle knob.

Sep 30, 2012 | Summit Appliances Division SPWD1470C Front...

1 Answer

Error code "UE" clothes have


UE = Unbalance Error


Laundry load is unbalanced, manually loosen any tangled laundry.
If only one item of clothing needs washing, such as a bathrobe or jeans, the final spin result might be unsatisfactory and an UE error message will be shown in the display. Unbalance error is cleared by POWER switch OFF and back ON.

Thanks for using FixYa !!

Dec 12, 2010 | Washing Machines

1 Answer

Error 4 ON HAIER WASHING MACHINE.


Error U04 means the door is open.

Put your knee against the door handle and press it against the handle until you hear a click. The machine should start filling within a minute.

This is a problem I had start occurring about a month after I started using the machine. You will soon do this for every load, a minor annoyance on a cheap machine.

--------------------------------

Error EC4 refers to the temperature of the air vent.
Within 30 minutes of dry cycle there is 5 minutes in which the temperature is not increasing.

Ask the technician to
repair it.

Alternatively make a custom cycle with no drying cycle and hang dry the laundry. I usually do this myself as opposed to listening to it groan for 2-3 hours.

Aug 10, 2010 | Haier HWD1000

1 Answer

I hadn't washed any laundry for a couple days and then my Kenmore Elite Oasis starting beeping in the middle of the night. My husband had to unplug it because it wouldn't stop. The next morning I did some...


According to the Whirlpool Cabrio (Sears Oasis) manual, this code indicates a "stuck key"

Keypad/User Interface Failure
F then 2 flashes when in:
• Diagnostics Test mode if a stuck key is detected.
• Standby mode if there is a user interface mismatch.

Following is the PDF of the manual.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/409753510a90c8be852571e90073421b/$FILE/8178583.pdf

Sep 22, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

"UE" error code LG washer wm0642hw


This is an Imbalance code. Your issue may be with:

  • The load is too small
  • The appliance is tilted
  • Laundry is gathered to one side
  • Non-distributed things are put into the drum
Try adjusting the load size, and make sure the unit is level.

Aug 07, 2009 | LG WM1814CW Front Load Washer

1 Answer

Error Code F33 after new bellow put in. How can I fix it?


Just fixed my F33 error code for GHW9400. This code is for the pressure switch HOSE. Mine had a small pin hole. Cost:: the dealer gave me a free new hose. Remove the top and back. In the top right hand corner (at the back of machine) you will see a small hose attached to the pressure switch box. It is small black& 3/8" and about 2 1/2 ft long coming out of the bottom.. Mine was not attached with anything. Pull off at the top and bottom. Look for even the tiniest hole. Hose probably can't cost a couple of dollers.
Replace and just finished my first error free load. It may be causing your leak too.

Jan 10, 2009 | Whirlpool GHW9400 Front Load Washer

1 Answer

Mildew/Stagnant water smell in washer


you know, this does happen.

run it on a full cycle, warm, with either of these in solution.

baking soda, at 1/10 concentration

non chlorine bleach, at 1/6 concentration

you most likely need to do this more than once, until your nose is happy.

Also, consider doing this at least once every 200 wash cycles.

essential oils have same effect, and do a nice anti microbial as well.

we did this in commercial laundries all the time, as part of standard health code compliance issues.

Feb 18, 2008 | Maytag Neptune MLE2000A Front Load Stacked...

Not finding what you are looking for?
Summit Appliances Division SPWD1470C Front Load AllinOne Washer Dryer Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Summit Appliances Division Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Brad Brown

Level 3 Expert

16166 Answers

Are you a Summit Appliances Division Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...