Question about Toshiba Satellite L305-S5961 (PSLB8U-109025) PC Notebook

1 Answer

Good day! I have problem with a mouse. It is not working. It is written that, Windows has stopped this device because it has reported problems. (Code 43). It happened with USB controller (location: Port_#0002.Hub_#0006) What should i do? Thank you in advance

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

Go to your Device Manager and uninstall all the Universal Serial Bus controllers and then right click and choose Scan for hardware changes. You may also need to restart the computer.
To access Device Manager, use any of the following methods:

- Click Start, click Run, and then type "devmgmt.msc" (without the quotation marks).
- Right-click My Computer, click Manage, and then click Device Manager.
- Right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager.

Posted on Mar 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows has stopped this device because it has reported problems. (Code 43) epson printer CX9300F


Make sure you are using the correct driver for your operating system. You can download drivers for Windows 7 32-bit and 64-bit here:
Epson Stylus CX9300F Drivers Software

Note that this is a non-US-based website. Make sure that the language of your version of Windows 7 and the Epson driver you install are the same.

May 03, 2014 | Epson Stylus CX9300F Series

Tip

USB devices not recognised or not working properly?


Try these steps to reinitialize your usb ports on your pc

1. Unplug ALL USB devices connected to the computer. If you are using a USB mouse and keyboard, temporarily use the older type PS/2 devices if you have them, if you don't then just leave them connected.

2. Hold down the windows key and press r

3. Type devmgmt.msc into the run menu and press ok

4. Click on the + sign next to the Universal Serial Bus Controllers
71921df.jpg
5. You might need another mouse to do this if you have a usb mouse.. I recommend you get a ps2 connector mouse which goes into the green round connector in the back of your pc.
0a245dd.jpg
6. Right click and uninstall first the usb root hubs. all of them then uninstall the rest of the devices you see under Universal serial bus controllers

7. Ones you have uninstalled everything you should see the Universal serial bus controllers there at all.

8. Now go ahead and restart your pc.

9. Ones you have restarted the pc your usb ports will reinstall in a moment stand by while it installs all of them. If you get warning messages click ok or continue installation.

10. Now go ahead and plug the usb devices back in. Install software if required, all usb devices if not faulty or broken should work now. Also note the error code if you get one?

This solution doesn't fix all usb problems so if you have a yellow ! mark there and device status reports a error code. Then it might not be a problem with your usb ports.

Thank you for reading, do leave suggestions, comments, feedback below.
Ekse


usb mouse drivers for windows xp mouse trackball mouse drivers bluetooth mouse computer problems 2.0 usb driver microsoft windows scanner driver usb 2.0 air mouse computer service usb hubs update drivers fix windows computer services computers hub usb usb drivers usb 2.0 hub laptop mouse usb switch 4 port usb 2.0 hub wireless mouse usb driver fix computer windows xp pro usb optical mouse computer support computer repairs update driver 4 port usb hub usb security usb cable windows xp microsoft windows xp computer repair windows xp professional upgrade windows

on May 04, 2008 | Microsoft Windows XP Home Edition

1 Answer

I have windows 7 in my dell vostro 1014 laptop.bluetooth is not working .In device manager it shows windows has stopped ths device because it has reported problem code:43


good day sir. this is quite a complicated problem. and i found a site where they discuss this problem and gave several solutions that might help you. here it is:
http://support.microsoft.com/kb/941997
hope this helps. goodluck and please rate my answer. thanks

Apr 25, 2011 | Dell Vostro 1014 Laptop Computer

1 Answer

I have compaq 610 laptop window7 . frequently external usb mouse stopping to work as well as showing that one usb device attached with this computer, window is not recognising it. By clicking i knew that...


hey Windows 7 stated, first time here in days, nobody ever tells OS.
you are a winner for savvy award 1000
old relic COMPAQ LT.

your LT now has 2 mice, and if you run 2 mice what happens
they try to get in a fight.
we must shut off the mouse pad first.
I guess this mouse is a MS mouse, no mouse name stated.

I shut off the mouse pad in device manager.
look for the USB mouse not, is this unstated mouse wireless, if yes a new battery is now needed. and matching usb dongle.
now plug in the mouse. PC goes DING donng.,
and it loads a driver
be in the internet to W7 can find the driver.
if still dead, go to device manager,
see that mouse there under. mice and other pointing devices
mine shows, HID mouse here.
if missing , plug the mouse into all USB ports 1 by one and listen for the DINGDONGg (means new USB device discovered)
if still fails buy a new mouse, gee barrow one for a day.
if that mouse works , trash the dead one.

you can not have 2 mice at same time or you get into trouble.
the old mouse pad , we had to use disable in device manager to kill it.
on the new HP we have newer driver and it has this.
" tab, automatically disable pad mouse with usb mouse active"
but old ones dont have this
I too hate pads. when the thumb hits the pad, I want to kill that pad fast.
one ebay a 5 pack of mice is $14
a 5 year supply, all mine fail in 1year, the wires snap near mouse inside, easy;

Jun 18, 2017 | Compaq Computers & Internet

1 Answer

Windows has stopped this device because it has reported problems. (Code 43) i got new manhattan mouse and it's not working with my win 7 please help


This mouse was made the time Windows 7 is still not out in the market. There's a possibility that the built-in driver of this mouse is supported by Win Vista and lower versions only.

You may need to contact the manufacturer of this mouse and check if they have an available driver for Win 7. If there's none, you need to contact the computer manufacturer and have them enable the USB Legacy Support of the computer instead, so that your Win 7 will recognize your mouse.

Thank you!

Apr 07, 2010 | Manhattan Mouse

1 Answer

I get a report message saying basically this : An Error occured during installation.The driver installation files for this device is missing a necessary entry. This may be because the INF was written for...


Yes,
 you need a Vista driver for this device, windows 95 shows how old it is !
If you are upgrading from WIndows XP to Vista delete all the mouse drivers in the device manager (under control panel).
Then let Vista install new ones.

Mar 07, 2010 | Toshiba Black/Red USB Laser Mini...

1 Answer

M305 Logitech Wireless mouse with nano stopped working on Laptop


This is a difficult one to answer so lets go through it.
You have a M305 thatrefuses to work and your OS says is returning an error.
You've quite rightly checked the Logitech site and found out that it appears to be a common fault as many people are reporting the same issue.
Logitech have not resolved the issue.

All the above are valid reason for retun to the vendor for replacement/refund.

However you WANT to replace a M305 (a model with know issues) with ANOTHER M305 which will have the same issues as Logitech have not resolved the problem.

I will have to think long and hard before giving a definative reply.

Dec 29, 2009 | Logitech Cordless Mouse

1 Answer

My laptop mouse wont work


do you mean the mouse integrated in the laptop or an external USB mouse?
If it is the integrated mouse, try to get an USB mouse, plug it and wait until your laptop recognize it, assuming you are working in Windows XP right clic on My Computer, clic on Properties --> Hardware --> Device Manager , double clic on Mice and other pointing devices, once here, look for the mouse of your laptop (do not mis identify it with the external mouse that you just plugged) right clic on it and clic on uninstall.
Restart your laptop, once in windows again it will recognize the mouse as a new device and will install the drivers again. 
Good luck!

Feb 24, 2009 | Acer Aspire 5920-6727 Notebook

Not finding what you are looking for?
Toshiba Satellite L305-S5961 (PSLB8U-109025) PC Notebook Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...