Question about Nikon N75 35mm SLR Camera

1 Answer

Error Code FE E

When I turn the camera on and when I try to take a picture, the code FE E comes up in the screen above the number of pictures left. It will not take a picture.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

The aperture ring is set wrong on your lens. It needs to be at the minimum f-stop, (highest number), usually in orange.

Posted on Aug 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nikon error code


This error the manual says: please contact the Nikon service centre closest to you. You could try to switch of the camera, remove the battery and replace it and then switch the camera on again, but if the error comes back you should contact Nikon.
Don't forget to check if everything on you camera is ok.
Battery charged, lens correct mounted. Memory card with enough space to save pictures )(correct format)

Dec 30, 2013 | 35mm SLR Cameras

1 Answer

Wat do;s Err-80 meen


Looked up on Canon.es and this is what I found.
FAQ: What does the error code 'Exx'?

FAQ ID: 44574
Last Modified: 22-Jan-09

Cause

Answer:


When an error occurs the camera will display an error code like "Exx", where "x" represent numbers.

See the list items at the bottom of this page when it shows following error codes.

"E18" error of the target unit / lens barrel
"E30" and "E50" error of the CF or SD card

When an error code "Exx" different from those already mentioned, the camera off and then turn to try to capture or play back images.

If this error persists or an error code appears often, there was a malfunction of the camera.

Note the error code and contact the retailer where you purchased the camera or the nearest service center for Canon.
I hope this helps

Jan 24, 2012 | Canon EOS-D30 35mm SLR Camera

1 Answer

What does FEE mean? The camera won't take a picture and I see that in the display of my Nikon N90S


FEE error message displayed on SLR camera LCD Description If the cameras LCD screen displays "FEE" in the area where the aperture is normally displayed, please ensure that the lens is attached to the camera correctly. This error message will appear if the lens is not attached correctly to the camera or if you are not using a CPU lens such as the Nikon AF or Nikkor P lenses. Alternatively, if the lens has an aperture ring, it may not be set to f22 (or the highest aperture number on the aperture ring - normally marked in orange). Select the aperture number marked in orange on the lens and lock it using the aperture locking switch to prevent this occurring again.

1157a.gif

The FEE error message

1157b.gif
Set to F22, or the highest aperture number - normally marked in orange. Note the locking switch.
If the above did not resolve the problem and you still experence the the error display FEE, please contact your local Nikon office. Before doing so please also check the following.

1157c.gif

1157d.gif That the EE servo coupling highlighted above on the lenses has not been broken. That the F-min switch highlighted above on the camera body has not been broken. If either of the two items above are broken please contact your local Nikon service center.

Apr 19, 2011 | Nikon N90S 35mm SLR Camera

1 Answer

I got and fEE... and figuered out it means error!!


This might be a long shot, but on the lens section of the guide shown below, it notes ,,,,

Non-G lenses will have an aperture ring on the base of the lens where it's attached to the camera. Set this this ring to the smallest aperture (largest number), usually in orange and 16, 22 or 32. There usually is a lock to keep this ring set there, since if it comes off that setting you'll get an error message (fEE) from most cameras.

Full guide is here:
http://www.kenrockwell.com/nikon/d90/users-guide/index.htm

Hope this helps

Mar 06, 2010 | Nikon N60 35mm SLR Camera

2 Answers

Shutter speed


Sounds like you are having some photo taking issues. There is a rule of thumb for shooting, It is the focal length must be equal to or less than the shutter speed. Example. 100 mm lens must have 1/100 of a second or faster when hand holding a camera. If your shots are too blurry or out of focus, try using faster film speed, ie. 400 asa or 800 or 1600, try using a flash if you are going to be at 1/60 a second. The faster the film you use, allows you to have a faster shutter speed. Another option is to use a tripod, and then your shutter speed is irrelevant.

Dec 27, 2008 | Nikon FE 35mm SLR Camera

2 Answers

Error Code FE E


Make sure the F-stop ring on the lens is turned to the minimum aperture setting. Usually 22 or 32. The camera won't allow you to shoot unless it is. It will try to warn you by flashing the FEE code.

CameraRepairs

Aug 03, 2008 | Nikon N75 35mm SLR Camera

1 Answer

FEE error message


To get rid of the pesky fEE just set your lens to f22 or f16 ( depending on what lens you have ) and that is all. You might also want to lock this setting in ( if it is a Nikon lens then the lock is on the side just above the lens aperture ring.

Dec 07, 2007 | Nikon N55 35mm SLR Camera

1 Answer

N70 FE E error in LCD and view finder - lens locked properly


Yes, the error is due to your lens not being set to highest F number. Solution : set lens to the highest number ( f 16 or f 22 ) and lock it in ( on the lens ). Your camera will work find now.

Oct 07, 2007 | Nikon N70 35mm SLR Camera

17 Answers

My Canon is displaying - Err 99 what should I do?


Just found this info which should help diagnose the err 99 issues (info direct from Canon apparently)

To isolate the cause of the issue, do the following: -

1. Turn off the camera.
2. Remove the lens, battery, and CF card.
3. Allow the camera to sit without power for approximately 20 minutes.
4. Insert only a fully charged battery, and turn on the camera.
5. Depress the shutter button as you would to take a picture.


Does the “ERR 99′ message appear? If so, the camera may be faulty and requires a service. If it does not, then: -

1. Turn off the camera.
2. Insert the CF card.
3. Turn on the camera.
4. Format the CF card in the camera.
5. Depress the shutter button as you would to take a picture.


Does the “ERR 99′ message appear? If so, then the CF card is faulty. Try a different card. If the message does not appear: -

1. Turn off the camera.
2. Clean the gold contacts on the lens by GENTLY rubbing them with a pencil eraser or soft cloth. Keeping the camera face pointing down, also clean the gold contacts on the camera, being careful that you do not let any debris fall into the camera body.
3. Reattach your lens.
4. Turn on the camera.
5. Depress the shutter button as you would to take a picture.
If the “ERR 99′ message only appears when one particular lens is attached, then that lens should be examined by a service technician.
If you see the “ERR 99′ with a different Canon lens attached, then the camera is faulty and should be serviced.

Apr 10, 2007 | Canon EOS Elan 7ne 35mm SLR Camera

Not finding what you are looking for?
Nikon N75 35mm SLR Camera Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon 35mm SLR Cameras Experts

kakima

Level 3 Expert

96627 Answers

Ric Donato

Level 2 Expert

225 Answers

Bart Pulverman

Level 2 Expert

354 Answers

Are you a Nikon 35mm SLR Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...