I need instructions to reset my new westinghouse control panel for model LT908SA*03. Sequence of buttons to set please.

If the buttons on your AOC 24G2U monitor are no longer functioning as expected, and you can only control the input/source selection, it indicates a possible issue with the monitor's control panel or the firmware. Here are some steps you can try to troubleshoot the problem:

1. Power Cycle: Turn off the monitor and unplug it from the power source. Wait for about 1-2 minutes, then plug it back in and power it on again. This can help reset the monitor's internal settings and may restore the functionality of the buttons.
2. Button Combination Reset: Some monitors have a button combination or sequence that can reset the settings to their factory defaults. Consult the user manual for your AOC 24G2U monitor or visit the manufacturer's website to find the specific button combination for resetting the monitor's settings. Follow the instructions carefully to perform the reset.
3. Firmware Update: Check if there is a firmware update available for your monitor model. Visit the AOC website or contact their customer support to inquire about firmware updates. Updating the monitor's firmware can sometimes resolve issues with the control panel and restore full functionality to the buttons.
4. Physical Inspection: Inspect the buttons on the control panel for any signs of physical damage or debris. Sometimes, dirt or debris can interfere with the proper functioning of the buttons. Use a soft, lint-free cloth to gently clean the buttons and the surrounding area.
5. Contact AOC Support: If the issue persists after attempting the above steps, it's recommended to contact AOC customer support for further assistance. They can provide specific troubleshooting steps or arrange for repair or replacement if necessary.

Please note that the steps provided are general guidelines and the exact steps or options may vary depending on your specific AOC 24G2U monitor model. Always refer to the user manual or contact the manufacturer's customer support for model-specific instructions.

Yes, you can reset your old Westinghouse smart TV by using reset codes. The specific code you need may vary depending on the model of your TV. Here are some general steps you can follow to reset your Westinghouse smart TV using reset codes:

1. Press the power button on your TV to turn it on.
2. Using your TV remote, press the "Menu" button and navigate to the "Setup" or "Settings" menu.
3. Look for the "Reset" option and select it.
4. Enter the reset code for your TV when prompted. The reset code may be a sequence of numbers or a combination of buttons on the remote control.
5. Follow the on-screen instructions to complete the reset process.

If you don't know the reset code for your Westinghouse smart TV, you can usually find it in the user manual or by contacting Westinghouse customer support. Keep in mind that resetting your TV will erase all custom settings and restore the TV to its factory default settings

Hello Peter Ramirez,

No need to suffer any longer...

Get onto eBay (below)... $7.99 and FREE shipping...

New Original Westinghouse RMT 24 TV Remote Control DWM48F1Y1 DWM32H1G1...

Carnac the Magnificent

Hi there, if you know what model it is you can do a google search for the owners manual. There should be a sequence of buttons you can push or hold to reset to factory/default settings.

Performing a cold reset erases all of the EI0 card information. Print a configuration page prior to performing a cold reset to reference previous information.


1. Turn the printer on.

2. As the printer performs its memory count, press and hold the check button until all three lights on the control panel are lit.

3. When SELECT LANGUAGE appears on the control-panel display, press the arrow up button until COLD RESET appears on the control-panel.

4. Press the check button. The printer performs a cold reset and then continues its power-on sequence.

Hope this helps

Please rate this solution, thanks!

Please try these instructions: http://www.ehow.com/how_6982019_reset-westinghouse-tv.html

Universal remotes are cheaper,but those codes u enter for any tvs any models might work might not.No,not any univeral remotes have any particular tvs brands,just a list of a universal codes for the tvs brands it covers.Try website like Remotes.com to buy a remote same as ur original remote.Than u don't care about codes or taking chances of those codes,will or will not work for ur tv.

Try this. I'm not sure if it applies to your model.

The reset sequence used is:
1) Crack the door open.
2) Within 3 seconds press the following sequence - Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy Saver Dry
3) Close and latch the door
4) Press the cancel button (the circle with the triangle in it)