Question about Bosch Exxcel WFO 2465 Front Load Washer

1 Answer

Bosch Exxcel did not spin an F18 display - Bosch Exxcel WFO 2465 Front Load Washer

Posted by on

  • mharjun13 Mar 23, 2011

    the washing did not spin an F18 display

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,277 Answers

Hi from retired Englishman in SW France,
Sorry but I do not have the decode for F18 for your particular machine but for similar models F18 indicates a 'pump/drain out time'. I would therefore suggest as a first step that you clean the drain motor lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not even go to spin or release the door lock if there is any water still left inside.
Here are my guidance notes for checking both the drain filter and the drain motor ;-0)
-------------------------------------

If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and most are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play!

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT!
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. If it doesn't work then the motor is malfunctioning!

Hope the filter is the problem and good luck!
John C

Posted on Mar 23, 2011

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6277 Answers

SOURCE: Bosch Exxcel 1400 Express -

Hi from retired Englishman in SW France,

Sorry but I do not know your particular machine even though we have a Bosch. I would suggest, however, as a first step that you clean the drain motor lint tray/filter. So many 'faults' are caused by blocked filters. The motor is unable to drain all of the water in the allotted time.
If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and held in by a round cover/knob.

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT!

It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. If it doesn't work then the motor is malfunctioning!

Hope the filter is the problem and good luck!
John C

Posted on Feb 28, 2011

Testimonial: "Many thanks - you were spot on but I got the info five mins earlier, Thanks again from Ireland."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch exxcel f18 error. Machine runs cycle but will not drain water. Have emptied and unblocked pump on front and checked drainage hose.


according to what i find on google, it's a drainage fault, drain manually and check filter...ALSO CHECK OUTLET PIPES FOR ANYTHING BLOCKED IN IT

Dec 29, 2013 | Kenmore Washing Machines

1 Answer

Manual


F18 is time out on drain, check the pump filter for foreign objects (coins etc-behind flap, bottom right of front kickplate) and also check for blockages on outlet hose (especially if connected via spigot, directly to sink U bend)

May 03, 2013 | Bosch Exxcel WFX 145S Front Load Washer

1 Answer

F18 error code on Bosch Exxcel washer/dryer, and water pouring out the bottom - any ideas on how to fix? Filter is clean.


Sump hose has fallen off Unplug tilt machine back have a look underside to check also could be the soap dispenser hose Hole in it.This rubs away on side of machine 5yrs old.

Sep 13, 2017 | Bosch Logixx WFT 2806 Front Load...

1 Answer

F18 error code on Bosch Exxcel washer/dryer, and water pouring out the bottom - any ideas on how to fix? Filter is clean.


This might help you with the pump its on a bosch Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 04, 2013 | Bosch Logixx WFT 2806 Front Load...

2 Answers

Error code F18


F18 error code means that the filter is blocked.

Look around for a propeller shaped part, it should be able to spin freely. If not, remove the debris so that it is unblocked.

Hope this helps (remember to rate and comment this answer).

May 14, 2011 | Bosch Axxis+ WFR 2460 Front Load Washer

2 Answers

Hi I have got bosh logixx 8 1400 express and it is showing F18 on the display with an very annoying boop noise. Could u please help me in sorting out this . thanks


Error F18 means that the filter is blocked.

Look around for a propeller shaped part, it should be able to spin freely. If not, remove the debris so that it is unblocked.

Hope this helps
to solve it.

Apr 18, 2011 | Bosch Exxcel WFO 2264 Front Load Washer

1 Answer

What is error code F18 please?


F18 means the filter is blocked. Look around for a propeller shaped part - it should be able to spin freely. If not, remove the debris so that it is unblocked. Good luck!

Feb 28, 2011 | Bosch Exxcel WFO 2264 Front Load Washer

1 Answer

Bosch exxcel 1200 express spinning slowly


I would suggest that you remove the motor, and check the brushes for wear.
If they are less than 3 or 4mm long, then they need to be replaced.
Hope this helps.

Jan 07, 2010 | Bosch Exxcel WFO 2465 Front Load Washer

2 Answers

Bosch Exxcel 1200 Express Washing Machine spin not working


I had the same problem- machiine not spinning and a few days later not turning at all. Display would go from 11min to 1min.
I did 2 things - 1) changed the brushes on the motor- cost £7.50 .
2) whilst working under the machine disconnected pipe from drum to pump and emptied it- found 2 coins in the bellows.

Nov 09, 2008 | Bosch Washing Machines

Not finding what you are looking for?
Bosch Exxcel WFO 2465 Front Load Washer Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...