Question about Nikon Coolpix 5200 Digital Camera

1 Answer

My picyures do not transfer

I am running Windows XP. I set thee camera to USB, plugged the cord to camera then computer. The screen comes up I click transfer.
1. The one movie I have says it transfered 100% but it is not in the Picture Project.
Then it shows transferring 1 of 116 images. The first says it transferred and hanhs. Also it is not there.
What am I doing wrong?
It is driving me batty!
BJ

Posted by on

1 Answer

Yio wassup dogg

Posted on Sep 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to transfer pictures from computer to camera memory card?


Below is how to transfer your photos incomputer to a memory stick in Windows XP operating system 1. Insert the memory stick into a compatiblememory stick reader. Plug the memory stick reader, with the memory stickinserted into it, into the computer's USB port. 2. After a moment, a screen thatsays "Removable Disk" will pop up and prompt you to take an action.Click on "Open folder to view files using Windows Explorer." Thiswill open the folders on the memory stick. Select and open the folder whereyour photos are stored. 3. With the memory stick folderand the photo folder open simultaneously, use the mouse to click-and-drag thephotos to the memory stick folder. 4. Close all folders and removethe memory stick reader from the USB port. 5. To ensure that your photos havebeen transferred, plug the memory stick back into the USB port. When the"Removable Disk" screen pops up, select "Open folder to viewfiles using Windows Explorer." Once you see the photos on the memory stickfolder, you can close the folder and remove the memory stick reader from theUSB port.

Jan 08, 2011 | Fuji FinePix J10 Digital Camera

1 Answer

When I hook my camera to a usb port on my HP 763 running windows xp, the nikon screen appears & shows the s4000 in the display & 93 pictures to be transfered to my C drive. When I hit start...


Consider NOT connecting the camera to the computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.

Nov 02, 2010 | Nikon Coolpix S4000 Digital Camera

2 Answers

Need a free download for my sony cyber shot dsc-w55 to download pictures on my computer


You do not need any Driver or Software to transfer the images from the Camera to the Computer.

1. Set the USB Connection or Transfer mode setting in the Camera menu to Mass Storage or Normal .

2. Connect the Camera to the Computer using the supplied USB cable or any USB cable.

3. The Computer will recognize the Camera (make sure that the recording media containing the pictures (Memory Stick) is inserted in the Camera).

4. Click the Start button and then click the "My Computer" icon (for XP Operating System and for Vista or Windows 7 it will be "Computer" icon).

5. In the "My Computer" or "Computer" window, click the icon that represents the Camera.

6. Click the "DCIM" folder and drag it to the desktop screen of the Computer to transfer the images from the Camera to the Computer.

However, you may download the supplied Picture Motion Browser software for the Camera from this Link.

http://esupport.sony.com/US/perl/swu-download.pl?upd_id=4598&mdl=DSCW55


Good Luck!!!!!!!!!!!!

Nov 18, 2009 | Sony Cyber-shot DSC-W80 Digital Camera

3 Answers

Nikon coolpix s210 will not connect to mac


I have a Intel Mac Powerbook running OS10.5.8
On a coolpix 100, the default setting is that the camera is charged by the computer through the USB cable. You need switch that OFF.
While the camera still does not show as usb device, you can access it through the Nikon transfer program AND through iPhoto

ez-pics

Mar 19, 2009 | Nikon Coolpix S210 Digital Camera

1 Answer

DX3500 Kodak software will not run in Windows Vista


Use a memory card in the camera, then use a generic USB memory card reader to transfer your pictures off the memory card. Camera USB cord drivers are always a pain to use.

Nov 12, 2008 | Kodak EasyShare DX3500 Digital Camera

2 Answers

Transfering pictures


if your running windows you can go to my computer and check if there is a removable disk double click on it and you can manually copy and paste the pictures to the folder.

Jul 20, 2008 | Nikon COOLPIX P4 Digital Camera

1 Answer

No pictures


Have you checked the HP hep site?
Here is their suggestion
Introduction This document explains how to transfer images from the camera to a computer running Windows XP operating system by using a universal serial bus (USB) cable. Transferring the images Follow the steps below to transfer images from the camera to a Windows XP computer. Step one: Connect the camera to the computer
  1. Turn off the camera.
  2. The camera came with a special USB cable for connecting the camera to a computer. Connect the large end of that USB cable to the computer. Figure 1: Connect the USB cable c00878070.gif
  3. Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.
Step two: Transfer the images Choose one of the following methods to transfer the image files: Method one: Transfer images with the HP Photosmart software
  1. Make sure the HP Photosmart software is installed on the computer. If the software is loaded, then go to step 2. If the software is not loaded, click here to upgrade to the latest version of imaging and printing software (in English).
  2. If images on the camera are selected for printing or selected for HP Instant Share destinations, make sure the computer is connected to a printer and the Internet.
  3. Turn on the camera. The HP Import Photos software starts on your computer. If you have set the software to automatically transfer the images in the camera, the images automatically transfer to the computer. Otherwise, in the Transfer images from Camera/Card screen, click Start Transfer . The images are transferred to the computer, and then if there are any still images that were previously selected for HP Instant Share destinations, those actions are started.
  4. When the Image Action Summary screen appears on the computer, you can disconnect the camera from the computer.
Method two: Transfer images without the HP Photosmart software If you do not, or cannot, install HP Photosmart Software on your computer, you can still transfer images from the camera to the computer using the Picture Transfer Protocol (PTP) in Windows XP. Follow the steps below to transfer images.
  1. Turn on the camera. Windows will automatically launch a program to transfer the images.
  2. When the images have finished transferring, disconnect the camera from the computer.
  3. If you encounter problems, check that the camera USB Configuration in the Setup Menu is set to Digital Camera .
    1. While in Live View , press the Live View/Playbackc00591915.gif button, and then press the Menu/OKc00280209.gif button.
    2. Scroll to the Setup Menuc00595863.gif using the left/right arrow c00280208.gif buttons.
    3. Use the up/down arrow c00280207.gif buttons to scroll through the Setup Menu to highlight the USB option.
    4. Use the left/right arrow c00280208.gif buttons to change the setting to Digital Camera and then press the Menu/OKc00280209.gif button.
    5. To exit from the Setup Menu , press the Live View/Playbackc00591915.gif button.
  4. Reconnect the camera to the computer.

Mar 06, 2008 | HP Photosmart M415 Digital Camera

3 Answers

Olympus Fe-280


rotate the knob or pressing to view pictures plug in USB cable sound beep suddenly message appear by click to transfer picture to computer.just follw instrucion.

Jan 04, 2008 | Olympus FE-280 Digital Camera

1 Answer

Picture cannot be transfer to computer


What version of windows do you have? If you are using Windows XP, you just need to plug the supplied cord into the camera, and then plug the usb lead into the computer. Windows XP will automatically recognize the camera and you will be ready to unload in about 2-3 minutes the first time you plug it in. The pc will recognize the camera as a removable drive, so go into "MY COMPUTER" and look for a removable drive called "Sony". Navigate thru the first folder until you get to the picture files.

Aug 29, 2007 | Ricoh Caplio G4 Digital Camera

Not finding what you are looking for?
Nikon Coolpix 5200 Digital Camera Logo

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Digital Cameras Experts

kakima

Level 3 Expert

96417 Answers

Steve

Level 3 Expert

3287 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Nikon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...