Question about Plantronics Discovery 925 Bluetooth Headset

1 Answer

Need to reset plantronics voyager pro heatset it pair with wrong phone and i cannot reset it or know how

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 91 Answers

To reset or pair your bluetooth device you need to put the device into discovery mode.To do this most manufactures use the power button,by holding the power button down for 8 to 10 seconds while turning the device on it should put it into discovery mode.Usually a light will remain on then you can find or search from your phone for new device.Once your phone has discovered the device it will ask for a pin\pairing code .Once again most manufactures use a 4 digit pin\pairing code they are as follows,0000,1234,9999, or 1111,try them in this order one will work. Hope this helps

Posted on Mar 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After I complet a call I still get some static in the headset. right now its been going on for 10 minutes. its at a very low volume but annoying


Making sure the headset is fully charged, you'll probably want to try and pair the headset to your phone again. Make sure that any bluetooth devices are removed from the phone. Removing the battery (if possible) for about 15 seconds helps to reset the phone. Follow the pairing instructions on the link below for the Plantronics Voyager Pro.

Plantronics Voyager Pro Pairing Instructions

Good luck from Headsets Direct!

Sep 05, 2011 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

I cannot hear anything. Headset is paired and connected, but I cannot hear anything at all.


You want to remember that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often. Simply turn your phone off and remove again the battery for a few seconds, then replace the battery and turn it back on again. Purge from the phone pairing information for your Voyager Pro headset and pair it again with your phone, carefully following the instructions on the link below for the Plantronics Voyager Pro. That should get some sound back in your headset.

Plantronics Voyager Pro User's Guide

Good luck from Headsets Direct!

Apr 02, 2011 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

Plantronics voyager pro plus is connected and paired with blackberry tour. when a call is coming in, I cannot answer or hang up the phone from the bluetooth headset.


Make sure that your Blackberry's headset mode is activated. If the headset mode is turned on in the Blackberry menu and settings, you may also need to re-pair the headset to your phone to make sure that it has a good connection. Before running through the pairing process, be sure to totally delete the headset from the Blackberry's menu. You may want the headset turned off for this process.

Once you make your Blackberry discoverable, then put the Plantronics Voyager Pro headset into pairing mode by holding the power button until the headset flashes red and blue. Here is the link below for the Voyager Pro pairing instructions.

Plantronics Voyager Pro Pairing Instructions

Good luck from Headsets Direct!

Mar 09, 2011 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

My ear piece keeps losing its pairing


Please remember that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often. Simply turn your phone off and remove again the battery for a few seconds, then replace the battery and turn it back on again. Purge from the phone any pairing information for your Voyager Pro headset and pair it again with your phone, following the instructions on the link below for the Plantronics Voyager Pro.

Plantronics Voyager Pro User's Guide

Good luck from Headsets Direct!

Jan 20, 2011 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

I can't answer the phone from my headset and once i'm finished talking I can't disconnect I have to use my phone to answer and disconnect. It was working fine but I'm not sure what happened


It sounds like the wireless link between the phone and headset has been compromised. Remember that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often. Simply turn your phone off and remove again the battery for a few seconds, then replace the battery and turn it back on again. Purge from the phone any pairing information for your Voyager Pro headset and pair it again to your phone, following carefully the instructions on the link below for the Plantronics Voyager Pro.

Plantronics Voyager Pro User's Guide

Good luck from Headsets Direct!

Jan 05, 2011 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

I have a samsung rogue and I all I hear is mostly static with the Plantronics Voyager PRO


Make sure that it has a good connection, try to re-pair the headset to your phone. Before running through the pairing process, be sure to totally delete the headset from the phone's menu. You may want the headset turned off for this process.

Once you make your cell phone discoverable, then put the Plantronics Voyager Pro headset into pairing mode by holding the power button until the headset flashes red and blue. Here is the link below for the Voyager Pro pairing instructions.

Plantronics Voyager Pro Pairing Instructions

Good luck from Headsets Direct!

Dec 25, 2010 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

Cant set to my phone


Once you make your cell phone discoverable, then put the Plantronics Voyager Pro headset into pairing mode by holding the power button until the headset flashes red and blue. Here is the link below for the Voyager Pro pairing instructions.

Plantronics Voyager Pro Pairing Instructions

Good luck from Headsets Direct!

Dec 13, 2010 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

My new sony ericsson doesn`t see a new plantrosonic voyager. The blue topth is not paired with any other phones. Please help.


Please bear in mind that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often. Simply turn your phone off and remove again the battery for a few seconds, then replace the battery and turn it back on again. Once you've done that, follow the simple instructions on the link below for the Plantronics Voyager Pro. Once you have your phone prepared for pairing, the process is pretty standard.

Plantronics Bluetooth Pairing Instructions


Good luck from Headsets Direct!

Dec 07, 2010 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

The people I talk to say that they hear an echo through their headset. This goes away if I reboot my headset. Is this problem caused by my headset or my blackberry tour cell phone.


It sounds like a phone issue, and the headset is a trigger. Please remember that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often. Simply turn your phone off and take the battery out for a few seconds, then replace the battery and turn it back on again. You'll need to purge from the phone any pairing information for your Voyager Pro headset and pair it again to your phone. Carefully follow the instructions in the link below for the Plantronics Voyager Pro.

Plantronics Voyager Pro Plus User's Guide

Good luck from Headsets Direct!

Dec 07, 2010 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

My plantronics Pro bluetooth was working well until last night when I had to reset my IPhone. Now the bluetooth is not working. It appears as if it is not compatible. I tried my son's Iphone who did not...


Please bear in mind that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often. Simply turn your phone off and remove again the battery for a few seconds, then replace the battery and turn it back on again. Make sure the phone doesn't have any bluetooth interference loaded on. On the link below for the Plantronics Voyager Pro look at "Listen to the Voice" for turning the headset on and off to reset for pairing and follow the pairing instructions in the manual.

Plantronics Voyager Pro+ User's Guide

Good luck from Headsets Direct!

Nov 11, 2010 | Plantronics Voyager PRO Bluetooth Headset

Not finding what you are looking for?
Plantronics Discovery 925 Bluetooth Headset Logo

2,768 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plantronics Radio Communications Experts

LeAnna Mathews
LeAnna Mathews

Level 1 Expert

3 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Plantronics Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...