Question about Compaq PC Desktops

1 Answer

Need to restore my evo n600c laptop to factory settings i have no recovery disc

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 125 Answers

If you need to recover your computer you will need the disk, otherwise a copy of windows to restore. The question is why do you need to recover, and whether you can go to safe mode and restore system to it's original functionality without recovery disk?
Also are you trying to recovery bios settings?

Depending on the extent of your computer recovery. Can you still get into the computer, into windows desktop? You might need to format and reinstall all drivers and programs



If you decide on formatting I have gone to the HP.com for all your drivers, as Compaq and HP are one company now. You can get a copy of all you drivers from the link below, just click on windows your using and then a list of all drivers are ready for your downloading. As you download save them to computer, once completed download, go to your folder where you saved files and run each one until you have everything installed

tp://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=316675&lang=en&cc=us&taskId=135&prodTypeId=321957&prodSeriesId=316673

Posted on Aug 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to reset my toshiba satelite A215-S4817 to factory default


toshiba satelite A215-S4817
This is a laptop not a desktop !!
Restoring factory default settings on your computer can be done within a couple of hours, without any need for the recovery discs.
First, you need to back up any data and information that you want to keep, such as documents, pictures, and downloaded email, since everything will be erased from your hard drive after restoring the factory settings on your computer.
If you haven't restored factory settings on your machine before, do not worry.
With proper instruction, you can have your computer back to its original state within a few hours at most.

Restart your computer and proceed to Step 2 before Windows begins to load after reboot.
If you are restoring a Toshiba model, hold down the "0" (zero) key as you turn off the machine, then skip to step three.
2
Access your computer's "PC Recovery" feature by entering the correct button(s) for your machine.
This button varies, depending on the make of your machine.
HP and Dell users will hit the "F11" key, whereas Acer and Sony users will enter "F10."
If you own a Samsung model, use "F4."
3
Select "Destructive Recovery," or "Restore Original Factory Image," from the list of options that appear on the next screen, then click "Continue."
A destructive recovery will erase everything on your machine and reinstall the operating system.
4
Wait as the factory settings are restored on your computer.
Windows will require you to make date, time, and language settings on the next set of screens to follow after your machine restarts.
This process can take anywhere from a half-hour up to 2 hours to complete.

Oct 14, 2013 | PC Desktops

1 Answer

Acer aspire t180 restore to factory settings on start up


You will need to use the recovery discs that came with the computer and boot from the disc and it will give you the option to restore to factory defaults. If you dont have the discs you will need to contact Acer to get a copy.

Jun 11, 2012 | Acer Aspire™ T180 PC Desktop

2 Answers

I wanna know how to reset my laptop back to factory settings Gateway windows 7 model# NEW90 NV59C


usually if you dont get a recovery disc with your laptop you would then use those discs to reload the system from scratch. the other is that you would have to create recovery discs as soon as you started using the laptop. if the sales person did not make you aware of it then he is a very bad sales person. the other solution would be to go to the web-site of the manufacturer of the laptop and under the support section or drivers and downloads you will find drivers and recovery disc image or iso or a self extracting file which you will then have to copy to disc then use the created disc to reload the system

Feb 28, 2011 | PC Desktops

1 Answer

I need to restore my Acer T690 to factory setting. The acer had problem booting so I used windows XP bootable disc and it had replaced the operating system. I have recovered my data. Now I need to restore...


Assuming the Recovery Partition hasn't been disturbed, boot the machine and press ALT + F10 at the same time. You will enter a recovery phase that will give you the option of restoring to factory settings. If the Recovery Partition HAS been either disturbed or wiped out, you will not be able to restore to Factory Settings without a set of disks from Acer.

Feb 17, 2011 | Acer Aspire T690 (AST690UP820A) PC...

1 Answer

Im trying to get my pc to go to its original settings factort restore


The only way to restore your computer to factory setting with all the software/bloatware as it came with your computer the first day you start it up, you will need the factory restore disk that came with the computer if one is provide, if not usually with e-machine product, which doesn't provide you with a factory restore disk, you will have to create one yourself using a dvd-r. Usually you will have to go the the emachine recovery/back up management option in your menu programs and use that program to make the factory restore disk, after making that disc, you will need to insert the disc, and shuit down the computer and restart it. It will prompt you to follow direction once the factory restore disk is boot up. Follow the directions and you should be good to go. If there isn't a recovery managment program or a factory restore disk provided, you will need to contact emachine up.... usually they can send you factory restore disk for a small fee.

Jan 20, 2011 | E-Machines (T2958) PC Desktop

3 Answers

I want to take my acer aspire back to the factory setting but dont have a cd how do i do it


Acer are cheap and they don't provide you with a factory restore disk. You need to make this factory disk yourself. I know how to do this, but it is to much for me to type and here is a really really good reference site for you to visit to get instruction to make your own factory restore disk. After making that restore disc,  pop the disk into your laptop and turn of your laptop and restart and the factory restore program should start, if it should not start then go into your bios menu and have it boot from your Dvd-Rom and save, after full restoration, make sure you turn your boot priority back to where your Os is being installed, exm hard drive.

 

http://www.ehow.com/how_4478845_restore-acer-computer-factory-settings.html

Jan 14, 2011 | Acer PC Desktops

1 Answer

Resetting


By factory settings, I am assuming you are reffering to the Operating System, or Windows XP.  If this is not a correct assumption, please let me know.
Unfortunately, there is no way to reset the PC to a factory default configuration with out the discs provided by the manufacturer.  Those discs not only contain the operating system install files, but also any drivers that are used that are specific to models made by that manufacturer.
Newer PCs skip the need of discs by creating a "Recovery Partition" on your hardrive.  Think of this as a snapshot taken of your PC just as it leaves the manufacturer.  It is possibly to boot to this partition, erase you current configuration, and restore this "factory default" configuration.  Unfortunately, this option is not available on your specific PC model.
It is possible to re-install the Windows operating system by using any type of Windows install media (CD,DVD,etc), but you will also have to download any special drivers (video card, sounds card, printer) from the manufacturer's web site.

Sep 16, 2008 | Compaq Evo D310v PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Compaq PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...