Question about Washing Machines

Open Question

Siemens s14.149 washing machine error codes f36 f34

Hello My Siemens S14.39 washing machine is giving me this error : F61 and F34. Can you please advise what I should do

thanks
Amanda

Posted by on

1 Suggested Answer

SOURCE: siemens s14.149 washing machine error

Mine was the front door catch!

Posted on Sep 24, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F34 nad f36 error bosch washing machine


Check/ clean filter bottom R/H side could be dirty. Sometimes can be hard to remove to clean take it easy with it it can be quite Brittle plastic

Feb 02, 2015 | Bosch Washing Machines

1 Answer

What does erroe code f34


F34 is a motor error

and can mean many things from a blasted contact not so good
or brushes or a bad motor detect on the pump

Aug 05, 2014 | Siemens Washing Machines

1 Answer

What does F34 mean as an error message?


Hello, welcome to FixYa.

The "F34" code on your model of Thermador double oven indicates the control has detected an error with the airflow for the upper oven ( all lower codes start with "6", upper start with "3" )

This could indicate a faulty blower motor, not coming on at all, or if it does come on and still initiates an F34 error, it is likely the sail switch is sticking. It can be removed and cleaned as they do become contaminated with dirt, grease and dust over time.

The sail switch is located at the very bottom of the ovens where the grill is, under the lower door.


example:
macmarkus_999.jpg

( F34 can also be initiated by a failed "K6" relay on the control board, but that is less likely )

It can be accessed by way of removing the grill, however it is something usually best left to an authorized B/S/H/ service provider as it can be quiet involved and is better to pull the unit from the wall.

**Turn off the 40 amp breaker to the oven before attempting any service...safety first**

B/S/H/ is the parent company for Bosch, Thermador, Gaggenau, Siemens.

Thank you for choosing FixYa today and good luck, please take a moment to rate the info provided here for you.


Regards,

Macmarkus :)

Sep 15, 2011 | Thermador SC302T Electric Double Oven

1 Answer

Our Konica #2125 is displaying a F34 error code. what can we do to fix this?


this code for fuser unit but make sure about this code is that's f34-1 or f34-2
anyhow you need to rest this code

Aug 30, 2010 | Office Equipment & Supplies

1 Answer

ON SWITCHING ON THE COPIER KONICA 2020 ERROR CODE F35 DISPLAYS PROMPTLY


How to clear fuser abnormality codes (F34, F35, F36), 2020.

Solution:
To reset fuser codes, perform the following steps:
1. Access the 25 mode (power the machine OFF. Hold down the 2 and 5 keys, and power the machine ON).
2. Press P-4-7-P on the key pad. (1, 4, 5, or 6 will be displayed on the copy quantity indicator).
3. Press the 0 key to change the indication to a zero.
4. Press the start/print key to enter the new data.
5. Power the machine OFF then ON to exit the 25 mode.
If the code comes back then your fusing unit will need parts/service.

Dec 14, 2009 | Office Equipment & Supplies

4 Answers

Error F32


the error is COF32. You have to check the developing unit, to change the developer is needed and to run atdc auto adjust.

Apr 16, 2009 | Konica Minolta bizhub 180 All-In-One...

1 Answer

I have a error code F34 on a Konica Copier can anyone help


Description:
How to clear fuser abnormality codes (F34, F35, F36).
Solution:
To reset fuser codes, perform the following steps:
1. Access the 25 mode (power the machine OFF. Hold down the 2 and 5 keys, and power the machine ON).
2. Press P-4-7-P on the key pad. (1, 4, 5, or 6 will be displayed on the copy quantity indicator).
3. Press the 0 key to change the indication to a zero.
4. Press the start/print key to enter the new data.
5. Power the machine OFF then ON to exit the 25 mode.

Note: If the F code reoccurs after powering the machine ON or following warm-up, contact service immediately.

good lock

Mar 11, 2009 | Konica Minolta DiALTA Di200 Copier

2 Answers

Error code f35-3 on konica minolta 7145 copier


How to reset failure codes (F34, F35, F36). To reset failure codes, perform the following: 1. Enter the 25 mode (turn the machine ON, while pressing the 2 and 5 keys). 2. Select [1. software SW settings]. 3. Using the arrows on the left of the touchscreen scroll to DIP SW 3. 4. Using the middle arrows scroll to BIT 1. 5. On the touchscreen select OFF (0). 6. Power the copier OFF/ON.

Mar 04, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

2,308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

71525 Answers

Brad Brown

Level 3 Expert

15220 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...