Question about Dishwashers

2 Answers

Just inherited a Zanussi ZDi 6041 and the programme letters do not exist A, B etc can I have a photo or help on seeing where the programmes are on the original dial. Thanks J

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

A intensive 65 degree
B normal 65
C quick wash 65
D rince & hold

Posted on Jun 12, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 196 Answers

Try this link. Should be the online manual.

http://kitchen.manualsonline.com/manuals/mfg/zanussi/zdi_6041.html

Posted on Mar 22, 2011

  • james_bam719 Mar 22, 2011

    Thanks, yes I have looked at that but it does not help as there is no picture. It just tells you to choose a programme. Any more thoughts?

  • Michael Crozier Mar 23, 2011

    Im afraid not. If you got it free might be worth spending 60 or so replacing the front facia panel. Just visit a site like buyspares and input your make and model. Be sure to use all letters and numbers as there are different colours.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset zanussi jetsystem programme function board with error E40


E40 is a door lock fault code, you need to replace the door lock,
you cannot reset the fault code, this happens automatically when the fault is rectified. nice easy job though.

Sep 30, 2016 | Zanussi Washing Machines

1 Answer

How to reset Zanussi zdt6252 dish washer


To reset a programme in progress, open the door and press the push button of the programme under way for more then 1 second, until the corresponding indicator light goes out. The dishwasher is now reset and you can select a new programme.

Dado

Mar 03, 2015 | Zanussi 23 in. ZDT6252 Built-in Dishwasher

1 Answer

Replace a honeywell t822l1000 with a programmable unit


Match the thermostat wires to the letters on the new thermostat terminals R Red Y yellow ETC.

Nov 16, 2014 | Honeywell T827K1009 Mercury Free EconoStat...

1 Answer

Zanussi washing machine error code e80


An error has occurred with reading the programme selector control. This can be resolved simply by turning it to "0" and selecting a programme again. If this doesn't cure the problem you may need to seek professional help.

Nov 19, 2011 | Zanussi ZWF1430W Front Load Washer

1 Answer

Zanussi TCE 7276W Condensor Dryer - no red lights but won't go!


Hello, have you cleaned the condensor stack just recently if so check that the stack etc is fitted correctly and the door is closed fully.

Hope this helps.

May 14, 2010 | Dryers

1 Answer

Replacement of heating programmer


yea you should be able to just when you remove the old one mark witch wire went to witch connection by marking it some how i personaly take one wire at a time wrap it with a small piece of white tape and write the letters on the piece of tape then when i replace with the new one i cant mess it up also look for any of the wire connections to see if any have to be or have been jumped out

Nov 14, 2008 | Honeywell Water Heaters

1 Answer

Zanussi FLA 1001W washing machine - Programme selector dial


you can buy a new indicator as a spare - quite cheap. best souyrce would be service force - assuming you are in uk, its in the phone book

Feb 07, 2008 | Zanussi FLA1001W Front Load Washer

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Owen Barnes

Level 3 Expert

867 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...