Question about Philips Magnavox 9P6034C 60" Rear Projection Television

1 Answer

Just want to know if I have to buy a new TV

Hi everyone, So I moved and figured before I put my Phillips Magnavox 9P553C1 TV back together I would clean out the lenses. I was stupid and did not research how to do this previously. Long story short, I got a bunch of glycol oil on the boards. I cleaned it with electronics cleaner as suggested in this forum and also replaced the glycol oil. I plugged it in and nothing happens till I attach an input device is cable or DVD player then I get a buzzing sound followed by smoke. Is a there a place to buy replacement mainboards for these TV's? Thanks in advance
.

Posted by on

  • pinsen97 Aug 04, 2008

    followup question: do each of the color guns have separate fuses?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 8,617 Answers

You can get the parts at the following link. Leave them an email with your model number and what youre needing they will respond quickly to your email.
http://servicemanuals.vstore.ca/

Posted on Aug 03, 2008

  • Sonny Berry
    Sonny Berry Aug 04, 2008

    No they dont have sepearte fuses for each of the CRTs

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Put new coolant in Magnavox 9P6040c101 Projection tv. Convergence will not align. Colors are juxtaposed and words are going down hill. Looks like the red lens will not align.


It would take a hundred emails for me to explain here--I have done this type of repair a lot and on these sets--you got yahoo im or skype?

Mar 31, 2012 | Projection Televisions

1 Answer

Bad color; everyone and everything is very orange


contact the store you bought it from. They will help you or refund you

Mar 07, 2010 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Red "aura" in the middle of my 55" Phillips Magnavox


Your TV most likely has one or more possible problems.

Problem #1: Convergence Chip Failure ( common problem )

Here are some of the most common symptoms and example photos of a convergence problem
  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
701cb04.jpg
77ea520.jpg
f0900cb.jpg
Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.



You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.

2c07611.pngSolution #1

You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kits for most models. If you don't see a kit for your set send them a quick note and they will put one together for you. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, etc.


Problem #2 CRT Fluid is Cloudy

Projection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the coolant in the blue and green tubes will become cloudy and cause the screen to look dull, red/orange, etc. You may even see halos around images.

Picture of a set that needs the fluid changed.

578ba6c.jpg
TV set after fluid change

65af323.jpg

2c07611.pngSolution #2


What you will need to do is replace the coolant and clean the crt. You can get a repair kit from www.TvRepairKits.com that includes replacement coolant, photos. instructions, etc.

Feb 01, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

60" Projection Screen Phillips Magnavox won't turn on


Check the site www.TvRepairKits.com - they put together a kit to fix this problem. 

Nov 30, 2008 | Philips Magnavox 9P6034C 60" Rear...

2 Answers

Phillips Magnavox 9P6031C103


You can try ebay, they may have them for auction. or you can try the vendor (philips).

I hope this helps

Shuttle83

Jul 07, 2008 | Philips Magnavox 9P6034C 60" Rear...

3 Answers

Broken Screen on Philips Magnavox 51mp392h/17


your only chance will be find one at the local repair shops that may have saved some from sets they have scraped out, But they are hard to come by, and phillips have them as no longer available as do most manufactures shortly after that model lines goes out of production. Also try www.craigslist.org as they have chapters all over the world and often people give away dead sets, you may get lucky and find one.

Jun 25, 2008 | Philips Magnavox 51MP392H Rear Projection...

2 Answers

Phillips Magnavox


Sounds like your Convertion bord pops. Tv Technical Prop, Take for service.

May 06, 2008 | Philips Magnavox 9P6034C 60" Rear...

5 Answers

Problems with my Phillips Rear Projection TV!!


have the coolant (glycol) in the CRT's....not as expensive as buying a new set...and sounds like it should be good as new if thats the only problem you have with it.

Jul 16, 2007 | Philips Magnavox 51MP392H Rear Projection...

Not finding what you are looking for?
Philips Magnavox 9P6034C 60" Rear Projection Television Logo

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68250 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...