Question about Siemens WFXD5200UC Front Load Washer

1 Answer

Our Siemens WFXD5200UC Front Load Washer, has a serious vibration problem in the spin cycle. I have read the owners manual in detail, about mixing clothes sizes in the load. When we first purchased this unit 5 years ago, it was pretty quiet; but now has become excessively loud in the spin cycle. Is there a common issue that causes this to happen? Is there a way that I can try to fix it. I am quite capable of small repairs. Please let me know? Thank You, Kenneth Mausolf

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, your washer may vibrate or make some noise during normal operation. If vibration and noise are excessive, however, you'll need to troubleshoot the problem. The two main reasons for such an issue are overloading and nonlevel installation. Overloading can be corrected by putting less clothing into the washer before you run a cycle. It can be corrected mid-cycle by removing clothing articles from the washer mid-cycle. It's also very important that you make sure that your washer is located on a firm, completely level surface. Otherwise it may create severe vibration and noise, possibly even enough to damage the machine or nearby items.

Posted on Mar 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code F63 for Siemens 14.46? - Siemens WFXD5200UC Front Load Washer


This error indicates a fatal error with the control board. A replacement board for the WFXD5200UC is available here: http://www.repairclinic.com/Shop-For-Parts/a11b129i1995d691201/Model-WFXD5200UC01-Bosch-Washing-Machine-Main-Control-Board-Parts .

Before you replace the board, you may be able to reset the error code. Start with the washer off (the knob will be at the 12 o'clock position) and the door closed. Turn the knob to the 6 o'clock position and wait 2 seconds. Press and hold the spin button while you turn the knob to the 7 o'clock position. Wait another 2 seconds and release the spin button. Turn the knob to off. You may need to repeat this up to 6 times. If the error continues to appear, the board is faulty.

If the washer is under warranty, contact Siemens. I hope this helps.

Cindy Wells

Jul 11, 2016 | Siemens Washing Machines

1 Answer

Is there any instructions on how to change the Water inlet valve of the Siemens product WFXD5200UC? I bought the valve.


e manuals on ManualsLib Makes it easy to find manuals online and if that doesnt help enter model name in address bar and add service manual. most manuals are just instructions how to use machine. service manuals show you the innards...lol

Oct 23, 2015 | Siemens WFXD5200UC Front Load Washer

1 Answer

50% of time machine does not spin


It is possible the sensor is faulty but check to make sure the washer is leveled?correctly side to side and front to back. Hope this helps

Jan 18, 2014 | Siemens WFXD5200UC Front Load Washer

1 Answer

Started filling, made a loud noise, stopped filling immediately, door wouldn't open. I tried everything to get it to open. Running the spin cycle finally got the door open at the end of the cycle, though...


The washer drain the water if you put on spin. all electronically controlled washer won't unlock the door and or spin if there's water inside the water has to be drained out first.If the basket didn't move(no motor movement) and it finished the cycle, POSSIBLE problem is the motor control board. Motor Control Board 00436461

Nov 22, 2017 | Siemens WFXD5200UC Front Load Washer

3 Answers

Where can you purchase Siemens parts in the USA? We've just begun our search for a drain pump for our WFXD5200UC UltraSense Washer. Thanks


www.apdepot.com
they are very reasonably priced. If you don't find the part on their website, call them.
I just purchased that same part (drain pump assembly) for about $ 63.
Now I have to find out how to access it to replace it!!

May 16, 2009 | Siemens WFXD5200UC Front Load Washer

1 Answer

Ripped front gasket??


Ripped front gasket? Siemens
WFXD5200UC
This video will show you how to change the door seal gasket on your washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question

Jun 07, 2008 | Siemens WFXD5200UC Front Load Washer

Not finding what you are looking for?
Siemens WFXD5200UC Front Load Washer Logo

Related Topics:

433 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

yadayada
yadayada

Level 3 Expert

79851 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Siemens Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...