Question about SanDisk Sansa e260 MP3 Player

3 Answers

Hi i have an sandisk sansa e260 4gb mp3/mp4 and when i turn it on all i get is the logo which is sandisk and if i put it on hold it and turn it on its say i locked it and the blue wheel is on and when i plug it in the Pc is only turns on and does the same and says sandisk...what can i do to make it work again? help please thank you Bryan

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 449 Answers

- Make sure the hold switch is set so the orange isn't showing.

if the hold switch is off

- Press and hold the power button for 30 seconds to force a hard reboot.

or

- Remove the 4 screws from the back, pull the battery, wait 30 seconds and then reinstall the battery.

Posted on Mar 22, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Trun off hold

Posted on Jan 09, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • SanDisk Master
  • 102,366 Answers

There's a slide switch on the top of the unit near the headphone jack. Slide it to cover the orange to unlock the unit.

Posted on Mar 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i turn on my sansa e260 and show the sandisk logo, it restart showing the logo over and over without going to the main menu, how do i fix it ?


Hi, welcome to fixya!

You need to reset your sansa for it to be in order again.

Learn how to reset the your various San Disk models;

Resetting a Sansa Fuze+, Clip+, c200, e200, or e200R player:

1. Press and hold the Power/Menu button for approximately 20 seconds.
2. Release the Power/Menu button.
3. Press the Power/Menu button again to turn on the player.


Resetting a Sansa View, Fuze, or Clip player:

1. Slide and hold the Power switch up for approximately 20 seconds.
2. Release the Power switch.
3. To turn the player on, slide the Power switch up then release instantly.

Resetting a Sansa Express player:

NOTE: The device can be either ON of OFF.

1. Press-and-hold the Volume Up (+) and Select buttons simultaneously for approximately 20 seconds.
2. Release the buttons.

If resetting doesn't solve the problem, please let me know for more assistance.

Good luck.

Nov 03, 2011 | SanDisk Sansa e260 MP3 Player

2 Answers

Cant put videos


if you put some videos to your sansai try to convert first "3gp file" Or mp4 file because there's is specific file to put videos to you sansai

May 22, 2009 | SanDisk Sansa e200 MP3 Player

1 Answer

Complete freeze to my sansa e280 8.0gb sandisk


take the back of the unit off with the very tiny 4 phillips head screws and remove the battery, then put it back in and see what happens, if it's no netter buy a new battery from Amazon there short money and come in a kit with 4 new screws and a screwdriver

Mar 20, 2009 | SanDisk Sansa E280 MP3 Player

2 Answers

SANDISK SANSA PLAYER PROBLEM


my sandisk sansa express just shows the logo then turns off need help

Aug 30, 2008 | SanDisk Sansa MP3 Player

1 Answer

Help my mp3


i just turned off the mp3 then switched the position to "hold" then hooked it up to the computer turned the mp3 back on then pressed and holded the center button until the connection signal came on.

Apr 01, 2008 | SanDisk Sansa Clip MP3 Player

1 Answer

Won't go past SanDisk logo screen


you have to take it off hold because when you first get it it's on hold

Dec 25, 2007 | SanDisk Sansa c250 (2 GB) MP3 Player...

1 Answer

It shows Sandisk logo and freezes there


Remove the SD card and try this;

Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted.

http://rapidshare.com/files/67740173/e200fw01.00.12.exe____

You need to put the device into "recovery mode" before you run the tool.

- Turn the device off (hold power for 20 seconds)
- Slide the hold switch into "hold" position.
- Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer.

Then run the recovery tool. Select format when prompted.




Best of Luck.

Nov 13, 2007 | SanDisk Sansa e250 MP3 Player

2 Answers

Sansa 250e


Try this;

Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted.

http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe

You need to put the device into "recovery mode" before you run the tool.

- Turn the device off (hold power for 20 seconds)
- Slide the hold switch into "hold" position.
- Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer.

Then run the recovery tool. Select format when prompted.




Best of Luck.

Oct 23, 2007 | SanDisk Sansa e250 MP3 Player

1 Answer

Sandisk sansa e250 only sandisk logo on powerup


Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted. http://sandisk.com/assets/file/downloads/firmware/e200fw01.00.12.exe You need to put the device into "recovery mode" before you run the tool. - Turn the device off (hold power for 20 seconds) - slide the hold switch into "hold" position. - Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer. Then run the recovery tool. Again, select format when prompted. Best of Luck.

Sep 10, 2007 | SanDisk Sansa e250 MP3 Player

Not finding what you are looking for?
SanDisk Sansa e260 MP3 Player Logo

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a SanDisk Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...