a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
After installing the hard drive in the computer then boot up with the Windows 2000 installation CD. Proceed with installing Windows. delete the existing partition , create a new partition, then format the hard disk in NTFS file format, follow the instruction to complete the installation. You will also need the product installation code to complete the installation and you will need to activate the Windows license by the Internet or by phone. You will also need to install the motherboard device drivers.
Adobe Photoshop CS2 have some system requirements to be meet before installation, the requirements are listed below: (if you don't meet any of the minimum you should upgrade your hardware to install this software) (hopes this helps)
To run Photoshop CS2, PC users
should have one of the following processors: Intel Centrino, Xeon, Xeon
Dual, Pentium III or a Pentium 4 processor.
Mac users who want to install Adobe Photoshop CS2 need at least a PowerPC G3, G4 or G5 processor.
Photoshop CS2 requires at least a
PC that runs Windows 2000 or Windows XP. Windows 2000 users need
Service Pack 4. Windows XP users need Service Pack 1 or Service Pack 2.
Mac users can run Photoshop CS2 on OS X versions 10.2.8 through
10.3.8 at least. However, Adobe recommends versions 10.3.4 through
Both PCs and Macs can run
Photoshop CS2 with 320 megabytes of RAM though Adobe recommends running
the program with at least 384 megabytes of RAM.
Before installing Adobe Photoshop CS2 on a PC, make sure you have at least 650 megabytes of hard-disk space free.
If you are installing CS2 on a Mac, check to make sure you have at least 750 megabytes of hard-disk space available.
Monitor and Video Card
Adobe Photoshop CS2 works best
on monitors with a resolution of at least 1024 by 768. A 16-bit video
card is also required. These requirements apply to both PC and Mac
Ensure that the hard disk is installed properly in the laptop. The drive cannot be formatted before it is installed, or if it's not installed correctly.
Gather the required software. The type of media will depend on the hardware in your laptop. Older computers without a CD-ROM drive, will require the use of the operating system floppy disks. Laptops that can run Windows XP require the installation CD and product key. Older versions of Windows also have disk-formatting capability in the installation process, and the installation media is either a CD or floppy disk.
Place the installation disk or manufacturer software in the drive and then boot the computer. Early in the installation process, the Windows installer has a step that will detect any installed hard disks and allow for them to be formatted. The software from the disk manufacturer will also detect the hard disk and give you the option to format the drive.
Determine which file system is to be used. Windows XP will either work on a NTFS file system or an older VFAT file system. Choose the desired file system when prompted.
Decide whether the whole disk should be formatted or if the disk will be partitioned and each partition to be formatted separately. The Windows installer includes a menu-driven utility that will create hard disk partitions before formatting. If the hard disk is being formatted to replace an existing Windows installation, delete the existing partitions and re-create them.
Format the hard disk with the Windows installer when prompted. The Windows installer will let you know when it is time to format the disk and ask for confirmation.
What are the system requirements for using this printer?
PC Compatible Requirements - An IBM
(r) compatible PC with at least a 486/66 MHz (for Windows 98) or Pentium
(r) 133 MHz (for Windows 2000) processor (Pentium or higher processor
recommended) - Microsoft (r) Windows 98 or Windows 2000 - At least 16MB (for Windows 98) or 32MB (for Windows 2000) of RAM (32MB for Windows 98 or 64MB for Windows 2000 recommended) - 50MB of free hard disk space (100MB or more recommended) - VGA or better display adapter and monitor - CD-ROM or DVD drive for installing the printer software -
USB connection: a computer running Windows 98 or Windows 2000, with a
Windows-compliant USB port and a shielded USB "AB" cable up to 6.5 feet
(2 meters) long. Using an improperly shielded USB cable-especially a
cable more than 6.5 feet (2 meters) long-may cause the printer to
malfunction. Apple Macintosh Requirements - An Apple (r) iMac (tm) series or Power Macintosh (r) G3 or G4 with USB port - For iMac: Mac (r) OS 8.5 or later (Mac OS 8.5.1 or later recommended) -
For Power Macintosh G3 or later: Mac OS 8.5.1 or later If your iMac is
running OS 8.1, you need to upgrade your operating system before
installing your printer software. To find out which operating system
your iMac is running, select About This Computer from the Apple menu. If
you're running OS 8.5 or 8.5.1 on your iMac, Apple recommends that you
install iMac Update 1.1. Download the update for your system from Apple
at http://asu.info.apple.com. Contact Apple if you have problems
installing an update. - 16MB of available RAM (more recommended) - 50MB of free hard disk space (100MB recommended) - VGA display or better - CD-ROM or DVD drive for installing the printer software -
A shielded USB "AB" cable up to 6.5 feet (2 meters) long. Using an
improperly shielded USB cable-especially a cable more than 6.5 feet (2
meters) long-may cause the printer to malfunction.
What is the boot order in the BIOS? Set that to 1=FDD 2=CD-ROM 3=HDD While the PC is still on, put the Windows CD in the drive Restart the PC, watch the screen for a prompt to boot from cd - press a key The installation will start, you will need to choose where to install Windows If you do not need to save any data, format the C: drive and install window there. Follow the prompts the rest of the way through the installation. You will need to enter the Windows License code at some point. It is a good idea to change the regional settings to match your location and how you want the date and time formatted. Most things should be detected and installed automatically, so you are safe to accept the defaults. After about 45 minutes you will need to restart the PC and then you should be ready to enjoy Windows 2000. Be sure to go to Windows Update and install all of the patches.
Does your webcam come with a CD on the package? This maybe the driver that your PC is requiring if your OS is not yet Windows 2000 professional or Windows XP or Vista. Please insert the CD run the installer. You may need to restart your PC after the installation process is complete and you can try using the camera again.