Question about Microwave Ovens

2 Answers

I need lid for a waring VP 1000 food processor. The item number is BFP03K (flat work bowl cover) I am living in Ireland.

Posted by on

  • 2 more comments 
  • wickedatbest Mar 22, 2011

    yes you are correct..it is VPA 1000.

  • wickedatbest Mar 22, 2011

    I replied earlier but maybe it didnt reach you..you are correct it is VPA-1000..will it be possible to find a supplier for that part in ireland or the U.K.

  • wickedatbest Mar 22, 2011

    ok thanks

  • wickedatbest Mar 23, 2011

    I may go with option 1..there is one concern that i have..when i click on the link to www.webstaurantstore the description of the item you recommend tells me that it is designed to cover the bowl when it is not in use.The cover i require must operate when the processor is actually working.Will this cover do both?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 844 Answers

Welcome to FixYa!

You can order the Flat Work Bowl Cover of Waring FP1000 in this link http://www.ereplacementparts.com/waring-fp1000-food-processor-parts-c-120019_120349_120437.html

It accepts international shipping.
Customers who wish for their orders to be shipped outside of the U.S. must click the "International Shipping" link on the shopping cart page. The link will take international shipping customers to the iglobalstores.com website where they can complete their eReplacementParts.com order by filling out their shipping and billing information.

I hope this helps.
Thank you for using FixYa!
Keep me posted.
Jas247

Posted on Mar 23, 2011

  • Jas Barinaga
    Jas Barinaga Mar 23, 2011

    The correct Model Number is FP1000 and the correct part number is DFP03 (Batch Bowl Cover).
    Refer to this linkhttp://www.waringproducts.com/com/parts/...

    I already posted where you can possibly order it and have it shipped to Ireland.
    Keep me posted. Thanks.

  • Jas Barinaga
    Jas Barinaga Mar 23, 2011

    I think the correct Model Number is FP1000 and the correct part number is DFP03.
    Refer to this link http://www.waringproducts.com/com/parts/...

    You can order from this link http://www.ereplacementparts.com/waring-...


    It accepts international shipping.
    Customers who wish for their orders to be shipped outside of the U.S.
    must click the "International Shipping" link on the shopping cart page.
    The link will take international shipping customers to the
    iglobalstores.com website where they can complete their
    eReplacementParts.com order by filling out their shipping and billing
    information.


    Thank you for using FixYa!
    Keep me posted.
    Jas247

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,961 Answers

Hello!
Is the model number you gave correct? or is it VPA-1000 instead of VP-1000?

Posted on Mar 22, 2011

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the cuisinart 14 cup food processor. I have not used it in probably 6 months and today decided to make a pie crust. Everything is ready to go and when I press ON nothing happens. I made certain...


Sometimes mating the bowl to the base does not depress the indented safety start button at the front of the base. This can happen more often if you pre-assemble the bowl and lid before mating to the base. Sometimes also the plunger rod in the bowl (that pushes the indented safety button) gets fouled with debris and does not slide nicely up and down. You may have to clean that area.
Test the safety button .... take the bowl off and take a small screwdriver to depress the button while activating the start lever. BE CAREFUL ... since the center drive cylinder will spin. If the motor turns on and drive cylinder rotates then the problem is how the bowl was mated to the base. If the motor does not turn on ... then it could be the motor/wiring/switch.
Helpful?
Good luck with your troubleshooting

Feb 12, 2018 | Cuisinart Microwave Ovens

1 Answer

Can't get my LOGIK L22FPS10 Food Processor to work properly can get the bender to work but not the food mixer.


Me and my family had the same problem there is noting wrong with it . You have to put the base lid of the blender on so it can work because the mixer and the blender cannot be on at the same time

Jul 25, 2011 | Microwave Ovens

1 Answer

I have been given a Magimix 3300 large food processor without a manual, and it hasn't been used for some years. The bowl seems to be jammed on ... is there a release button somewhere. I have had a...


Hello,

All Magimix processors I have seen have not had release buttons to release the bowl/lid. It may be worthwhile you contacting Magimix themselves to see if they can help you.

Jul 02, 2011 | Microwave Ovens

2 Answers

I am seeking a replacement carrier for a Braun Multipractic Type 4259 food processor


If you were to log on to the manufacturer's web site, I think you may be pleasantly surprised as usually, if available, one is able to download, by model number, Customer Instruction Manuals, list of Dealers for spare part supplies as required.

The information is normally free of charge.

I hope this helps.

Jan 22, 2011 | Microwave Ovens

3 Answers

My model CFP20 bowl for Black and Decker Short Cut Food Processor is cracked. Where can I get a replacement?


If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, and a list of Dealers for spare parts, as required.

Just Google the manufacturer's name and follow the links. Make certain you are directed to the manufacturer's web site as some search engines direct you to other sites and they charge for the information that is normally free of charge.

I hope this helps.

Jan 05, 2011 | Microwave Ovens

1 Answer

I have cracked the bowl on my Tefal food processor number D0250D34....Does anybody know where I can get one? Ive searched and searched and can't find anything. Its the Jamie Oliver food processor if...


google or bing or ask.com with model number and type. Use one of the links provided above, they will all have parts
cheers snd good luck

Nov 16, 2010 | Microwave Ovens

2 Answers

I have a kenwood food processor model number FP310 SN SN0098141 and the part which connects to the central spindle and rotates in the bowl to which the whisks are connected is broken. Does anyone know...


Hi where did you find your Serial Number... i have searched and seached!!! HELP

Try This

http://www.buyspares.co.uk/kenwood/food-processors/fp310/catalogue.pl?shop=kenwood&path=71551&model_ref=590218

Oct 17, 2010 | Microwave Ovens

1 Answer

Food Processor Mod. # FP1445


I hope you are using a bowl to catch the food...?

One thing you can try is to cut out some plastic from a blister-pack or other type of toy-package and tape it onto the end of the chute. This will act somewhat like a doggy door flap. This will certainly slow the food down as it enters the bowl.

Mar 29, 2008 | Microwave Ovens

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

79851 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...