Question about Whirlpool Cabrio WTW6600SBT Top Load Washer

1 Answer

What is DU blinking on a Whirlpool Cabrio washer mean?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,277 Answers

Hi from retired Englishman in SW France,
'DU' stands for Door Unlock Error. There is likely to be a problem with either the door solenoid/lock or the 'door open/closed' sensor. Both require a service engineer's attention I suggest ;-0(
Good luck,
John C

Posted on Mar 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wondering what code F-- means on cabrio whirlpool topload mod. wtw66005w2 Thank You


Is there a number after the F code?

Thats ok heres what the code means: Whirlpool Cabrio Washer Fault Codes.

Means primary control failure and to resolve this you'll have to replace the machine control assembly. This error should be fixed by whirlpool as its a common issue with whirlpool Cabrio washers, you can call 1-800-253-1301 whirlpool will send a tech. to fix it and pay for the part.

Hope helps.

Aug 03, 2011 | Washing Machines

1 Answer

Whirlpool Cabrio WTW7600XW on the display screen is says sd and all the lights are blinking


The manual that came with the machine explains that the Sd error means "suds" and that means you are putting way too much detergent in, or aren't using HE detergent. If you keep doing this you're going to damage your machine. These washers are so water efficient, you only have to use about 1/4 to 1/3 the HE detergent the bottle recommends. Suds-lock has been the culprit behind many a HE washer death since their inception. Hope this helps.

Jul 16, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Error code and machine not washing


Some washer and dryers will clear the codes by unplugging the machine from the wall.... Leave it unplugged for 30 secs... then plug it back in..... may clear code..... and may unlock door so you can get the clothes out.


Unsure of the code meaning.... but if you clear it by power down and it works don't worry about it unless it returns quickly.....

Jul 13, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

2 Answers

What does LD mean on the display


Hi


Thanks for using FixYa. Error Ld means long drain and it flashes when the water level will not change even after the drain pump is on. To resolve this issue you’ll need to check the drain hose and the drain pump for any blockages. Also check if the pump is running fine. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 11, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Cabrio dryer is working but there is a code "AF" blinking, What does this mean?


means air flow sounds like vent that goes outside may be plugged up with lint

Jan 12, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

DU error code


The Kenmore Oasis and Whirlpool Cabrio washers are essentially the same. Following is the Whirlpool Installation and service manual for their Cabrio washers.

The DU indicates a problem with the door Un-lock mechanism. See the section on troubleshooting2.gif and display codes.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/409753510a90c8be852571e90073421b/$FILE/8178583.pdf

Oct 13, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Du error code on whirlpool cabrio


that code is for the door unlock error. is it possible that you may have tried really hard to open the units lid when it was locked? if so the door lock may have been broken. if not, then try to unplug the unit for a few minutes and try a new cycle.
if the code comes up again then you will have to call for free service as it has a 1 year warranty for parts and labor. yes even if you broke the lid lock!!! dont worry it happens when you get something new and are not sure how it works.

Dec 29, 2008 | Whirlpool Cabrio WTW6600SBT Top Load...

Not finding what you are looking for?
Whirlpool Cabrio WTW6600SBT Top Load Washer Logo

668 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2333 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...