Question about Sony BRAVIA KDL-46V3000 Television

1 Answer

After power on my Sony bravia it goes to Digital

After power on the Sony bravia it goes to Digital ... i want it to always start with AV1

it is a setup with an external digital receiver and signal comes in via scart interface

Posted by on

  • frdj Aug 03, 2008

    i gave it a try but it did not work...

    more details: it is a KDL-32P2530 sony Bravia



    If i switch the tv on it goes to black screen en on the right top of the screen i see 00



    after pressing upper left button on the original "remote" it goes to AV1 and works fine..... after going to stand by .. and turn on TV later same thing happens.... balck screen and 00 on right top screen



    the other problem is that channel switchin via the remote controll of the external digital receiver works fine... but the volume controll mus be set by remote controll of the Bravia now...



    The original and prefreerd setup was that after sitching on the Bravia it started with AV1 and remote controll of the external digital receiver was used for channel switching and volume changing

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

While tv in On position, select AV1, push power button to standy, then unplug tv for 5 minuts. check the out come.

Posted on Aug 03, 2008

  • Shahid Electronics
    Shahid Electronics Aug 03, 2008

    I coudn't find info for KDL-32P2530 , Please contact nearest Sony service center for proper repair.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sony bravia 46" it wont continues to turn


Hi,

power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Take care in solving the problem....

Jun 21, 2011 | Sony BRAVIA KDL-46W4100 46 in. LCD HDTV

1 Answer

We have a 52" Sony


This problems alway the causing of the board,that call the T-CON decodering board it is dying.This T-CON decodering board alway sit in the middle at the bottom of the LCD screen panel.Tries websites like Shopjimmy.com,Ebay.com to buy a rrefurbish T-CON decodering board for the replacement.

Mar 21, 2011 | Sony BRAVIA XBR 52 in. LCD Flat-Panel HDTV

1 Answer

I purchased an Sony Bravia LCD 26 inch of KLV S200A series 3 years back. The LCD has now started developing problems like automatically the power goes off when any particular channel is being viewed and...


You have intermitant problems which may be caused by contact resistance or circuit overheating.After it cooled down the tv starts again. Leave TV on standby at all times.

Jan 03, 2011 | Sony BRAVIA KLV26S200 26 in. LCD TV

1 Answer

My sony bravia ex 400 made in malaysia is giving problem. The LCD goes of intermittenly and the red LED blinks,, again when I switch on again it comes up, but goes off again..This is happening again again...


Hello,

Your power supply board is not yet dead you can fix this by having basic knowledge on electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Hope this help in solving the problem........

Dec 09, 2010 | Sony BRAVIA KDL-V32XBR1 32 in. LCD HDTV

1 Answer

How do I switch to AV3 , AV2 And AV1 functionon the sony Bravia 40 inch HDTV


Hi,

All you need to do is press the TV/VIDEO button in the top left corner of your remote. Each time you press, it will cycle through the connected external inputs, e.g. AV1, AV2, etc.

Hope this helps.

BElectric

Nov 23, 2010 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

1 Answer

Sony Bravia 40S2000 when switching to HD video goes black


Contact Sony. There is a software update for this. Go to www.Sony.com for contact information.

Nov 22, 2009 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

1 Answer

No image at menu 'digital'


you connected the converter to AV1 that is the ONLY place you will recieve any signal leave the tv in av1 and run setup on the converter ONLY you should be all set

Nov 20, 2009 | Sony BRAVIA KDL-40S2010 40 in. LCD...

1 Answer

Sony BRAVIA KDL-40S2000 40 in changing from HD to digital channels


40X2000, both PS3 and DVD player are using a HDMI input and both flicker and loose signal fully, have to turn TV of then back on to get signal back. Sony say they have never heard this problem and replaced board. NOTHING fixed, still same problem.

Mar 09, 2008 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

Not finding what you are looking for?
Sony BRAVIA  KDL-46V3000 Television Logo

Related Topics:

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Flat Panel Televisions Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Paul Bade

Level 3 Expert

1392 Answers

Are you a Sony Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...