Question about GE JASRM24912 Remote Control

4 Answers

Remote programing for TV after changing batteries

I don't have the user guide and after changing batteries I forgot how to program the remote for the TV. It's a low end Philips remote bought this year, no model # on it. I have a GE universal remote Model RC 94948-G or SKU 24948 and I lost the programing manual, I need to known how can I programing my TV beacouse this remote no has numbers, only has arrows for change chanels and down/up volumen

Posted by on

  • 6 more comments 
  • lannette Aug 03, 2008

    i just got the tv/vcr combo and dont have the codes to my remote anymore and need the code

  • jporter833 Aug 05, 2008

    I can get all the way to making the TV turn off, but can not figure out how to save

  • honeybee6 Aug 17, 2008

    I have a GE remote RC24912-B and I dont know where the booklet with the codes is. I have a RCA TV HELP!!!!



    honeybee6@optonline.com

  • timmor Oct 21, 2008

    I have SKU 24948 GE Universial remote and the given solution works all the way to the last sentence. "press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press 5. press and release enter to install code" After the SANYO TV turns off I cannot figure what button to push to save code. I do not have an 'Enter' button

  • elnickers Dec 09, 2008

    I have sbc ru 254 remote control and have lost the manual to program my phillips tv, please help

  • Anonymous Dec 25, 2008

    zineth tv

  • Anonymous Dec 28, 2008

    i need the code for my tv its 19 inch orion

  • Serach Goldish
    Serach Goldish May 11, 2009

    i lost the manual with program codes to reset the remote.

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 40 Answers

HOW TO PROGRAM GE Remote Control DOING CODE SEARCH


1. turn on device 2. press setup (underneath on/off) till red light stays on the take finger off the button 3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once 4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press 5. press and release enter to install code

Posted on Sep 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I finally found that reading other posts on the web. But I also read where it was the record button. So After I got the TV to turn off I pressed the mute button and the record button I assume since I pressed the mute first that was the enter but who knows. But I got it to work!

thanks

Posted on Oct 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need step by step instructions on programing my universal remote to my sanyo tv

Posted on Oct 23, 2008

The Enter button is actually the mute button on this model!

Posted on Oct 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program a dich remote to a visio tv


      Use the RECOVER button to get back to watching satelliteprogramming if you accidentally change channels or inputs on your TV. Press POUND. Press & hold the TV Mode button until all Mode buttons light up. To take the remote out of Limited Mode, use the PAGE DOWN button instead of the PAGE UP button in step 2.

      to download the User Guide - Dish Network

      www.dish.com/downloads/tv.../2-Way_RC_UserGuide.pdf Dish Network
    Feedback

    Program Remote to TV/Other ' MyDISH ' DISH Customer ...

    https://www.mydish.com/support/program-remote-to-tv

Jan 25, 2016 | Televison & Video

1 Answer

I bought a oneforall universal remote but need a code for a supersonic 1380


If you are a user of AT&T Uverse remote, your technician might have possibly programmed your Sanyo TV remote before leaving.

If your remote is not programmed you can easily program it by following steps which will be mentioned in the user guide, these include:

  • You must know the four digit code for AT&T Uverse which might have been given to you at the time of TV set up.
  • The remote control codes for Sanyo TV AVM - 1337U are 1045, 4062, 1095, and 1380.

There are different methods to make your Sanyo TV remote work. For example, if you have a black remote, press the zoom button which will be on the right hand corner of your TV. Then you will have to press fast forward for two seconds or till the time the TV shuts down automatically. Then once again switch on the TV and press zoom, your remote will start working once again.

In case you have a silver colored remote control, enter code 922, you will be guided to a menu. You must select RCA. IF code 922 does not work for you, enter code 1041.

  • Any of the codes mentioned in your user guide book will definitely work. Once the code is accepted by the TV, you can program it easily and set the channels of your choice.
  • While setting programs you can program it either the manual programming method or the code search method.
  • Device codes assigned to the TV will again be mentioned in the user guide booklet.
  • The Uverse remote control is a universal remote control which is user friendly.
  • These programmed remotes are configured to work with other audio and video devices too. Uverse also offers other services such as high speed Internet, cable TV service, home phone, etc. It's rated as the best service provider in the market.
Audi Air Intakes

Jun 07, 2012 | GE Televison & Video

1 Answer

How do I get the code to program my Toshiba ct90275 remote to my Toshiba tv I don't have the user guide


please go to this next web page;

www. fitness.manualsonline.com or www. remotecodelist.com

God bless you

May 13, 2012 | Toshiba Televison & Video

1 Answer

Por favor necesito un control remoto universal para mi tv marca sankyo urgente


Remote control malfunctions are traceable to devices compartibilities, devices components, also user familiarisation. First, ascertain that the remote control is compartible to the television that is requesting functionalities. For example, televisions are provided a compartible remote control device that power feature functionalities. In situation that the televisions remote control were malfunctioned would require refering to user guides. Second, ascertain that device televsion has been provide with universall remote control that is programmable to capture signals. Univeral remote control devcies are capable of capturing signals to televisons sets that were within programming compartibolity. Finally, remove control malfunctions observed are battery relateky where depleted of resourcefulness requires replacement to take effect. Also recogniseable with remote controls are user familiration derive feature functions on televisons sets. refer to the user guide of either tv or rememote control to capture an impression.

Mar 02, 2011 | DISH Network IR Remote Control

1 Answer

LOST MANUEL FOR MY ONE FOR ALL TV REMOTE UEI URC-3220 NEED TO PROGRAM MY PANASONIC TV


059176a.jpg

I can help you with your missing URC-3220 Universal Remote users guide, and programming it for your Panasonic TV.

Please review my Fixya Tip posts for:

  1. Searching for the proper codes, or
  2. Downloading the URC-3220 users manual / owners guide.

I hope that helps.

Feb 22, 2010 | One For All URC-3021 Remote Control

1 Answer

I need programming instructions for Jensen remote control Jer 321 and codes for a Sharp tv I need programming instructions for Jensen Remote Jer 321 and codes for Sharp tv


Here you go...it took a while but I found the user manual cause I ROCK....that's right say it with me....He...Rocks...hehe...but anyway here is the link address if the link doesn't work...
http://safemanuals.com/user-guide-instructions-owner-manual/JENSEN/JER-321-_E

I hope this helps...good luck and thanks for rating my effort....the Fang

Download the completeuser guide (3257 Ko)

May 15, 2009 | Jensen JER-321 Remote Control

2 Answers

Dtv universal remote


I'm using a universal remote with code for an LG 0178 (or 101780 AND IT WORKS

Dec 29, 2008 | Vizio L32 32 in. LCD HDTV

1 Answer

Code for Sony projection tv


download the user guide from here:
save in your computer.. and you get the code for sony projection tv
http://safemanuals.com/user-guide-instructions-owner-manual/ONE%20FOR%20ALL/URC%203021-_E

Jul 07, 2008 | One For All URC-3021 Remote Control

3 Answers

Harmony 880 Logitech tv remote - won't change channels on direct tv


you may need to reprogram your remote, or, if you have your profile setup on the harmony website, reload from there

May 11, 2008 | Logitech Harmony 880 LCD Remote Control

Not finding what you are looking for?
GE JASRM24912 Remote Control Logo

4,497 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Cindy Wells

Level 3 Expert

4946 Answers

Are you a GE Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...