Question about Panasonic SC-BT200 Home Theater Systems. Single-disc 1000W Blu-ray Disc home theater system

1 Answer

I purchase a Panasonic Blu-Ray Home Theatre SC-BT330PCK with the intent of using it as a surround sound system for my TV and having a Blu-Ray as a bonus. Is it possible to have them work independently?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,140 Answers

Hello there,

Yes it is possible and relatively simple to do. I suspect you have only connected an HDMI cable from the Home Theater system (HT) to the TV. This cable only sends audio and video to the TV from the HT system - it can't be used to receive the audio from the TV back to the HT.

To get audio from the TV channels through the HT speakers, you will need to connect a separate audio cable from the AUDIO OUT sockets on the TV to the HT. This can be either a Digital Optical cable (connects to socket ringed in green) or an RCA type stereo audio cable (connects to AUX sockets ringed in red).

I purchase a Panasonic Blu-Ray Home Theatre - belectric_146.jpg

If you are using a cable or satellite receiver, you should connect the receiver directly to the HT rather than the TV. You would also need to select the correct INPUT on the HT when you want to use the speakers for the TV channels. This will be DIGITAL 1 if using the digital optical cable or AUX if using the RCA stereo audio cable.

The audio connections are explained on page 16 of your user manual and input selection is explained on page 23. If you don't have a manual, please let me know and I can supply one.

I can draw you a diagram showing how to connect your TV to the HT and provide step-by-step instructions for setting it up, but you will need to let me know the brand and model number of your TV. If you are using a cable or satellite receiver, please let me know the brand and model number of this receiver as well.

Hope this helps.

Regards,
BElectric

Posted on Mar 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic SA-PT467 I am trying to find the original description of my DVD home theatre system. I cannot find anything about it!!


Manual and Review

Panasonic SC-PT467 Manuals

https://www.manualslib.com > Brands > PANASONIC Manuals > Home Theater System
  1. Cached
Manuals and User Guides for PANASONIC SC-PT467. We have 1 PANASONIC SC-PT467 manual available for free PDF download: Operating Instructions ...

Panasonic SC-PT467 Home Theater System ' Product overview ' What ...

www.whathifi.com > Products > All-in-one-systems > Surround systems
  1. Cached
  2. Similar
Panasonic SC-PT467 Home Theater System overview from the experts at What Hi-Fi? - compare latest prices, see user reviews, and see specs and features.

Panasonic SC-PT467 5.1 Surround Sound reviews, prices and deals ...

https://www.reevoo.com > ... > Sound channels : 5.1 surround sound > Panasonic
  1. Cached
  2. Similar
Rating: 8.4/10 - ‎33 votes - ‎Price range: Compare prices Latest Panasonic SC-PT467 reviews, ratings from genuine shoppers. Find best deals and buying advice from consumers on Panasonic SC-PT467 from Reevoo. Surround sound effect‎: ‎8.8 Clarity of instruction manual‎: ‎6.9 Sound quality‎: ‎8.4 Panasonic SA PT467 Google Search

Dec 05, 2016 | Panasonic Audio Players & Recorders

1 Answer

How to connect a Panasonic SA PT950 home theater syst. to a Samsung flat TV UN65JU650D?


Samsung 40'' 720p tv and Panasonic home theatre system ...

? 5:30
https://www.youtube.com/watch?v=zDG-PZtqCNE
Jan 4, 2012 - Uploaded by Nazil Rahman
Samsung 40'' 720p tv and Panasonic home theatre system ...How to Connect an HDTV to Your Sound ...

New way to connect TV to Surround sound using HDMI ARC ...

? 4:46
https://www.youtube.com/watch?v=fFNEKnlQd6I
Dec 13, 2013 - Uploaded by Tampatec
How to Connect TV to Surround sound receiver system setupusing HDMI ... to Samsung, LG, Sony, Vizio ...

Unable to connect Samsung smart TV with Panasonic home ...

www.tomsguide.com/.../unable-connect-samsung-smart-panasonic-home...
Dec 16, 2014 - hi I bought Panasonic SC-BTT405 blue ray disk 5.1 home theater and ... Unable to connect Samsung smart TV with Panasonic home theater ... I have an LG55LA9650 smart TV hooked up to a Bose 3-2-1 home theater system.

Jan 23, 2016 | Samsung Audio Players & Recorders

1 Answer

I have a panasonic dvd home theater sound system SC-HT880 and i have just upgraded my tv from a Samsung 42 in Plasma to a Samsung 50 in 3D ready tv and i can not get the dvd payer to work in tv mode by...


Hi

Have you resolved this issue yet? I am in a similar position. recently upgraded my TV to a flat screen, also purchased a Blu-Ray but the SC-HT880 is now useless. How can I use the surround sound to work on TV? do I need to purchase an Amp?

Dec 31, 2010 | Panasonic SC-HT880 System

1 Answer

I have bouight a samsung home theatre system that comes complete wiht a DVd player - i also have a samsung blu ray player - naturally ithought they would be compatible!! how wrong i was!! the connections...


You have several ways to do this. You can hdmi cables from the two units and plug them into your tv if it supports hdmi and run the audio out portion on the back of the tv and hook that into one of the audion inputs on the surround unit. Or you run audio directly out of the bluray using rca, digital coax, or digital optical cable. Turn the surround reciever to the corresponding input that you choose to use.

Jun 19, 2009 | Samsung HT-BD2R 7.1 Channel Blu-ray Home...

2 Answers

Blu ray connect to my sc-pt660


as far as hooking up your blu ray player to the sc-pt660, the only real way to utilize the surround sound (with true surround sound) is through the optical audio out. You need to connect your blu ray player through hdmi to your tv and then connect your blu ray player to your surround sound using the optical audio out/in. I, personally have the sc-pt660 hooked up through component cables so I don't waste an HDMI input on my TV. Except for cd's, there is no reason for you to use the actual dvd player part of the surround sound considering you have a blu ray player. In conclusion, hooking your blu ray player and the sc-pt660 up to get better video simply isnt possible (your blu ray player alone gives the best possible resolution, 1080p). As far as audio goes, run an optical audio cable from your blu ray player to your sc-pt660 to get true surround sound.

Mar 23, 2009 | Panasonic SC-PT660 Theater System

1 Answer

Ghosting of picture from a Panasonic home cinema system


There must be a fault in the screening of the internal wiring to the scart outlet in the home theatre system. I simply changed the way the player was connected to the TV and the interference disappeared:-

1.) I used the RCA video outlet instead of the scart lead. Picture quality was not compromised. FYI the Panasonic Plasma TV I have has only RGB video input sockets at the back, so I used a scart to RCA adaptor to overcome this problem of connecting old technology to new.

2.) The surround sound when playing DVDs is generated directly from the home theatre system so there was no need to connect the audio from the home theatre system to the TV

3.) I used a pair of RCA leads to connect the "audio out" from the TV to the "audio in"on the home theatre system to provide the option of TV sound through the home theatre system.

Mar 18, 2009 | Panasonic Televison & Video

2 Answers

I have no surround sound when watching normal T.V


Hi there, in order to listen to t.v you need to purchase an optical cable and plug this in the optical out of the tv to the optical in on the blue ray then select D.IN.1 on the blue ray and press mode on the remote until it says matrix . This will allow you to listen to the t.v through all speakers. hope this helps. Also remember to take the rubber protectors off the ends of the optical cable, a lot of people forget this :)

Nov 17, 2008 | Samsung HT-BD2R 7.1 Channel Blu-ray Home...

1 Answer

SC-RT50 Decoding Surround Sound From Aux and Inputs


The other players need to be setup to output digital sound. Assuming you are using a digital or optical audio cable, go into the setup screen of the Blu-Ray or Tivo etc. and select the audio setup screen. Set the audio output to PCM.

Sep 07, 2008 | Panasonic SC-RT50 System

Not finding what you are looking for?
Panasonic SC-BT200 Home Theater Systems. Single-disc 1000W Blu-ray Disc home theater system Logo

580 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5047 Answers

kakima

Level 3 Expert

102366 Answers

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

Are you a Panasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...